How is the Geely Icon?

How many people can be scheduled for the Subject 3 test at one time?

Subject 3 test venues vary, and the number of people also differs. Some venues can accommodate a few dozen to a hundred people, while larger ones can test over two hundred people at a time. Below are the relevant details: Subject 3 Test Content: Includes road driving skills test and safety and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skills and safety and civilized driving knowledge test subjects in the motor vehicle driver's test. The road driving skills test content varies depending on the type of vehicle being licensed. Road Driving Test: The road driving skills test for Subject 3 generally includes: vehicle preparation, light simulation test, starting, driving straight, gear shifting operations, lane changing, pulling over, passing through intersections straight, left turns at intersections, right turns at intersections, crossing pedestrian crossings, passing through school zones, passing through bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving. Safety and Civilized Driving Knowledge: The safety and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and knowledge of post-accident handling procedures.

18

3

Share

Will the Motor of an Electric Car Be Damaged When Submerged in Water?

Electric car motors will not be damaged when submerged in water. As high-energy-density products, pure electric vehicles must comply with the Ingress Protection (IP) standards for electrical equipment enclosures proposed by the European Committee for Electrotechnical Standardization, typically rated at IP67 or IP68 for waterproof and dustproof capabilities. IP is the abbreviation for the Ingress Protection rating of electrical equipment enclosures. The first digit indicates the solid particle protection level, ranging from 0 to 6, where 6 means "No ingress of dust; complete protection against contact." The second digit indicates the liquid protection level, ranging from 0 to 8, where 7 means "Protected against the effects of temporary immersion in water up to 1 meter for 30 minutes," and 8 means "Protected against the effects of continuous submersion in water under conditions specified by the manufacturer." Whether IP67 or IP68, both indicate that the power battery of an electric vehicle will not leak electricity when submerged in water or passing through flooded areas for a short period. However, if parked in low-lying areas or underground garages for an extended time, it is still advisable to find a safer location. After prolonged submersion, weak points such as connectors may still allow water ingress under pressure, and excessively high water levels could also backflow into other pipelines in the vehicle.

16

3

Share

How to adjust the high beam height of the Sylphy?

The high beam adjustment button for the Sylphy is located on the lower left side of the steering wheel. Turn on the high beam switch, then rotate the knob upward to raise the beam height and downward to lower it. The "0" setting is the highest position, "1" reduces the height by one level, "2" is a relatively lower position, and "3" is the lowest setting. Here is some relevant information about adjusting the high beam height of the Sylphy: 1. When driving without heavy loads/luggage or on flat roads, choose the normal position "0". 2. If the number of passengers or the load/luggage in the car changes, the headlight axis may be higher than the normal position.

15

4

Share

Where is the air pump for the rear airbags of the Prado installed?

The air pump is installed at the base port of the Prado vehicle. Classification of air pumps: Pneumatic booster pumps are divided into gas-liquid booster pumps and gas booster pumps. The principle of the gas-liquid booster pump is to use the low air pressure of a large-area piston to generate high hydraulic pressure on a small-area piston. Various gases, including compressed air, nitrogen, water vapor, and natural gas, can be used as the driving gas source for the pump. It has a wide range of applications, such as clamping machine tool chucks, inflating accumulators, filling high-pressure cylinders, and converting low-pressure gas into high-pressure gas in industrial fields. Whenever the gas source pressure is insufficient, whether in mechanical or testing devices, a booster pump can be used. Mechanical principle of the air pump: Regardless of the reason for the pressure drop in the pressure-holding circuit, the booster pump will automatically start to supplement the leakage pressure and maintain a constant circuit pressure. It is driven by gas, with no arcs or sparks, making it completely suitable for use in places with flammable or explosive liquids or gases. It is easy to maintain and cost-effective. The booster pump is a plunger pump. During operation, it rapidly reciprocates. As the output pressure increases, the reciprocation slows down until it stops, at which point the pump's pressure remains constant, energy consumption is minimized, and all components cease movement.

7

2

Share

Should the straight-going vehicle yield to the left or the right?

Straight-going vehicles should yield to vehicles on the right. Right-turning vehicles should yield to left-turning vehicles; vehicles entering a roundabout should yield to vehicles exiting the roundabout; downhill vehicles should yield to uphill vehicles; large vehicles should yield to cars; turning vehicles should yield to straight-going vehicles; vehicles entering an intersection should yield to vehicles on the right; vehicles should yield to pedestrians. Precautions for yielding to pedestrians: When pedestrians are walking on the right side of the crosswalk and have not reached the center of the road, vehicles in the left lane should slow down and may proceed through the crosswalk after ensuring safety. When pedestrians are waiting outside the separation line between the motor vehicle lane and the non-motor vehicle lane and have not entered the motor vehicle lane, motor vehicles should slow down and may proceed through the crosswalk after ensuring safety. Identification of failure to yield to pedestrians: When pedestrians cross the separation line between the motor vehicle lane and the non-motor vehicle lane, motor vehicles that do not yield are committing a traffic violation. When pedestrians are waiting at the center of the road and have not entered the motor vehicle lane, motor vehicles that do not stop in the driving lane are committing a traffic violation. Reason for the implementation principle: The purpose of implementing the 'yield to the right' principle is to protect the driver. Because the driver's seat is on the left side of the vehicle, if a collision occurs with a vehicle on the right during driving, the driver on the left (i.e., the driver of the right vehicle) will be the first to be injured. Therefore, yielding to vehicles on the right can help ensure the safety of the driver on the right.

11

5

Share

How to Remove the Remote Battery of Buick Envision?

Press the back of the key to remove the key battery. More details about the Buick Envision are as follows: 1. As a new-generation strategic model of General Motors, the Buick Envision inherits the design essence of the ENVISION concept car. 2. The current model offers two engine options: 1.5T and 2.0T, each available in both front-wheel drive and all-wheel drive versions. The 1.5T is paired with a 7-speed dual-clutch transmission, while the 2.0T comes with a 6-speed automatic transmission. 3. Positioned as a midsize SUV, the Buick Envision has a relatively large body size and offers ample interior space. The vehicle's exterior design exudes a sense of power while maintaining a stylish appearance, making it an ideal choice for young drivers.

9

4

Share

How is the Geely Icon?

How many people can be scheduled for the Subject 3 test at one time?

Will the Motor of an Electric Car Be Damaged When Submerged in Water?

How to adjust the high beam height of the Sylphy?

Where is the air pump for the rear airbags of the Prado installed?

Should the straight-going vehicle yield to the left or the right?

How to Remove the Remote Battery of Buick Envision?

Is it easy to replace the clutch plate of the Besturn B50?

How many points does a car-free family need to have a chance of obtaining a license plate quota?

Why Can't the Tailgate of the Spirior Open?

Are the two exam attempts for Subject 1 conducted at the same test center?