How is the battery degradation of the Baojun e200?

1 Answers
DeclanDella
07/30/25 7:42am
The battery degradation of the Baojun e200 is very slow, with an official warranty promise of 8 years or 120,000 kilometers. Principle of shallow charging and discharging: Charging from 80% to 100% or from 60% to 80% will not have any negative impact on the battery. On the contrary, frequent deep charging and discharging will accelerate battery degradation. Signs of abnormal degradation: Decrease in charging capacity or a significant reduction in range under the same capacity; increased charging time, as battery degradation affects battery performance, which in turn affects the charging and discharging time of the vehicle; inability to charge to 100%, stopping at around 80% each time.
Was this review help?
17
0
Share
More Forum Discussions

What is the name of the guard plate above the wheel?

The guard plate above the wheel is called a mudguard. Here is a related introduction to mudguards: 1. Types: Rubber mudguards, which have good aging resistance, are commonly used on the rear of various vehicle wheels; Plastic mudguards, made of plastic, are inexpensive but hard and brittle; Painted mudguards, which are plastic mudguards painted to perfectly match the body color. 2. Function: The main purpose is to prevent mud from splashing onto the body or people, which can make them look unattractive. It also prevents mud from splashing onto the tie rods and ball joints, causing premature rust.
2
1
Share

Where is the Ambient Temperature Sensor Located?

The ambient temperature sensor is typically installed on the front bumper mounting bracket and is also a thermistor. The following are the functions of the ambient temperature sensor: 1. It detects the ambient temperature outside the vehicle, and the control system determines the control method based on the difference between the outside temperature and the inside temperature. 2. It provides the ECU with the temperature signal outside the vehicle cabin. The ECU compares this signal with the inside temperature signal to determine the temperature inside the vehicle cabin to meet the needs of the occupants. Additional information: A temperature sensor (temperature-transducer) refers to a sensor that can sense temperature and convert it into an available output signal.
19
0
Share

How Long Does Vehicle Appraisal Take?

Vehicle appraisal typically takes around 20 days to produce the appraisal results. Below is relevant information about traffic accident appraisals: 1. Definition: Traffic accident appraisal is an investigative activity conducted by traffic management departments of public security authorities. It involves assigning or entrusting specialized technical personnel or qualified appraisal institutions to conduct inspections, analyses, and determinations to address specific technical issues in traffic accident cases. 2. Content: There are 12 types of traffic accident inspections and appraisals: forensic appraisal, assessment of minor and severe injuries, injury mechanism appraisal, disability rating, alcohol content testing, vehicle safety performance inspection, mechanical failure appraisal of accident vehicles, vehicle type identification, trace evidence appraisal, fingerprint identification, micro-material identification, and physical evidence appraisal.
14
4
Share

Is it necessary to install a Lane Departure Warning System?

It is necessary to install a Lane Departure Warning System. Below is a relevant introduction to the Lane Departure Warning System: 1. Definition: The Lane Departure Warning System is a system that assists drivers in reducing traffic accidents caused by lane departure by issuing alarms. The Lane Departure Warning System consists of an image processing chip, a controller, sensors, and other components. 2. Working Principle: When the Lane Departure System is activated, the camera continuously captures the lane markings, and the image processing system obtains the vehicle's position parameters within the current lane. When the system detects that the vehicle is deviating from the lane, the sensors promptly collect vehicle data and the driver's operational status. Subsequently, the controller issues an alarm signal, providing the driver with more reaction time.
12
4
Share

Does driving in deep water cause damage to the car?

Driving in deep water can cause certain damage to the car, potentially leading to short circuits in the wiring, poor contact, water ingress into the engine, and reduced lifespan. Below are the impacts of water exposure on a car: 1. Chassis corrosion: If the water is not too deep, just above the chassis and entering the cabin, it can cause corrosive damage to the bolts used to secure external attachments at the bottom of the vehicle, weakening their tensile strength and potentially causing detachment in severe cases. 2. Reduced body tightness: Sealing strips and mud-resistant rubber rings can be affected by sand and mud, leading to oxidation, hardening, and accelerated wear. While this may not be noticeable when stationary, it can result in unusual noises or wind noise when driving.
5
3
Share

What Speed Ratio is Suitable for 460 Horsepower?

The default standard speed ratio is 3.7, with an optional ratio of 3.364. Here are the details: 1. Drive Axle: The rear axle of a truck tractor is the drive axle. Both 3.0 and 3.7 speed ratios have their advantages. Whether a different ratio saves fuel depends on the optimal operating conditions. The drive axle is also a reduction mechanism. With the same transmission, a drive axle with a 3.0 speed ratio is closer to the output speed of the transmission compared to a 3.7 ratio, meaning higher RPM at the same gear. 2. Output: During vehicle operation, under ideal conditions—standard load, flat roads, and stable cargo—the power output is high-speed and stable, with higher vehicle speed and lower torque. In such cases, a rear axle with a 3.0 speed ratio is more fuel-efficient.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.