How is the Audi dual-clutch transmission?

1 Answers
LeilaFitz
07/28/25 6:03pm
Audi's dual-clutch transmission is quite good, with the following characteristics: 1. The dual-clutch can be considered a manual transmission that automatically shifts gears and prepares the next gear; 2. The dual-clutch transmission (DCT) is different from ordinary automatic transmission systems, belonging to the automatic transmission category; 3. Manual transmissions use a clutch, where the driver must depress the clutch pedal during gear shifts, resulting in intermittent power delivery during shifting, causing discontinuous output performance. The dual-clutch transmission has different tolerance requirements, varying levels of quality process control, and different transmission and vehicle control systems. When paired with a 2.0T engine, it does not exhibit jerking sensations during low-speed driving.
Was this review help?
8
3
Share
More Forum Discussions

Does the Hongqi H5 not have a manual transmission?

Hongqi H5 does have a manual transmission. The Hongqi H5 is a manual-automatic integrated model, featuring both manual and automatic transmission modes. The entire Hongqi H5 lineup is equipped with a 1.8T engine, delivering a maximum power of 131 kW and a peak torque of 250 Nm, paired with an Aisin third-generation 6AT transmission. The Hongqi H5 is a luxury mid-size sedan with body dimensions of 4935 mm in length, 1840 mm in width, and 1470 mm in height, and a wheelbase of 2870 mm. In terms of exterior design, the Hongqi H5 adopts a design language similar to that of the Hongqi H7, with a fan-shaped grille paired with headlight clusters, giving the car a more youthful appearance. The side profile features smooth and flowing lines, presenting a refined and aesthetically pleasing look.
4
3
Share

How to adjust the light to turn on when the car door opens?

Here are the specific methods to set the interior light to turn on when the door opens: 1. Light assembly button: There is a light assembly button near the door that controls all interior lights. Press the interior light button to turn it on. 2. Function button: Next to the light assembly button, there is a function button. When it is off, it shows a yellow light, and the interior light will not turn on when the door opens. When it is on, it shows a blue light, and the interior light will turn on when the door opens. Below is extended information on the classification of car lights: 1. Headlights: Combined headlights are located at the front of the car, primarily serving the purpose of illumination and signaling. The light emitted by the headlights illuminates the road ahead, allowing the driver to drive safely at night. 2. Combined taillights: Combined taillights are located at the rear of the car, mainly serving the purpose of illumination and signaling. 3. Turn signals: Used to indicate to other road users that the car is turning left or right. Regulations require them to be amber in color. 4. License plate light: The license plate light mainly illuminates the license plate, making it identifiable at night.
17
1
Share

How to deal with a scratched wheel rim?

Repolish and repaint. The paint on the scratched area of the wheel rim needs to be completely sanded off with sandpaper, followed by rebalancing and four-wheel alignment. If the wheel rim is severely scratched, causing direct deformation, it is necessary to replace it with a new one. When replacing the wheel rim, be sure to use the same model.
1
0
Share

How to make the horn beep once when locking the car?

To activate the horn sound when locking the car, you can use the remote key. Simply press both the unlock and lock buttons simultaneously for 3 seconds. Below are specific details about car horns: 1. Function of car horns: The horn serves as the audio signal device in a vehicle. During driving, the driver can emit necessary sound signals as required by regulations to warn pedestrians and alert other vehicles, ensuring traffic safety. It is also used for urging movement and conveying signals. 2. Working principle: The horn operates by using compressed air flow to vibrate a metal diaphragm, thereby producing sound. Therefore, it can only be used in vehicles equipped with air compressors. Generally installed in buses and heavy-duty trucks, especially for long-distance transport vehicles driving in mountainous areas or curves, it effectively alerts pedestrians and oncoming drivers.
20
0
Share

How to Unclog a Car Sunroof Drain Tube?

Here are the specific methods to unclog a car sunroof drain tube: 1. Inflation method: Use an air gun to direct high-pressure airflow into the drain holes of the two front drain tubes inside the sunroof to clear the blockage. Use a cloth to shield the area to prevent dirty water from splashing inside the car due to the strong airflow. The air pressure should not be too strong, as it may cause the rubber joints and drain tubes to detach. 2. Flushing method: Using a syringe to flush the drain tube should help clear the blockage. First, use the syringe to extract water from the sunroof drain channel to prevent water from flowing into the car. If water accumulates at the drain outlet and drains poorly, it indicates debris inside the drain tube that needs timely cleaning. If the outlet is found to be blocked and the remaining tube length is adequate, you can cut off the clogged hose end yourself.
9
1
Share

What does KDSS chassis mean?

KDSS chassis refers to the electronically controlled kinetic dynamic suspension system, which is designed to enhance off-road driving performance in terms of passability, stability, comfort, and handling. Relevant information about KDSS is as follows: 1. Structure of KDSS: KDSS connects the front and rear hydraulic links into a closed system through bidirectional hydraulic pipelines, with the two hydraulic links replacing the vertical small links on the upper side of the front and rear anti-roll bars respectively. 2. Working principle of KDSS: When the vehicle is in a turning state, the outer suspensions of both the front and rear wheels are compressed, while the inner suspensions are extended. At this time, the stabilizer bar generates torsion to resist body roll, and the two pipelines connected between the two hydraulic pumps have no fluid flow, which can effectively improve anti-roll capability.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.