How is the Aisin 8AT transmission?

What is the difference between CVT and ECVT, and which one is more durable?

Due to inconsistent conditions for durability comparison, there is no direct comparability. The durability depends on the vehicle's usage. Below are the differences between these two transmissions: 1. Structural differences: First, the structure of the CVT transmission consists of a steel belt and a pair of pulleys, resembling two wheels connected by a steel belt that rotates. In contrast, the architecture of the ECVT is completely different from that of the CVT. The main components of the ECVT are planetary gears and an electric motor. By changing the combination of planetary gears, the motor's speed is altered, thereby adjusting the motor's power output to achieve different speeds and power levels. 2. Differences in power drive and transmission methods: Regarding power drive and transmission methods, the CVT transfers the engine's power to the vehicle through a driving pulley and a steel belt. On the other hand, the ECVT primarily relies on changes in the planetary gear structure to transmit power from either the electric motor or the engine, or a combination of both, to the vehicle. This involves differences in power drive, such as the distinction between electric motors, and differences in power transmission, including variations in planetary gears and the combination of electric motors and engines.

16

4

Share

Does Using Air Conditioning in the Car Consume More Fuel in Summer?

Using air conditioning in the car during summer does consume more fuel. Here are some precautions to note when using air conditioning in the car during summer: 1. Avoid resting in the car with the air conditioning on for extended periods: Prolonged idling of the engine may lead to incomplete combustion of gasoline in the cylinders, producing high concentrations of carbon monoxide, which can be drawn into the car through the air conditioning vents. If someone rests or sleeps in the car for too long, they may unknowingly inhale carbon monoxide. Excessive inhalation can lead to carbon monoxide poisoning, and in severe cases, it may cause suffocation and death. 2. Do not set the air conditioning temperature too low: Prolonged exposure to low-temperature air conditioning may lead to joint diseases such as arthritis or frozen shoulder. Additionally, in the hot summer, if the car's interior temperature is too low, it creates a significant temperature difference with the high temperatures outside. This temperature difference can make people more susceptible to colds, allergic rhinitis, and other conditions, causing inconvenience in their daily lives.

5

2

Share

What Are the Effects of Replacing a Car's Windshield?

Proper replacement of the windshield has no adverse effects, but improper installation can cause issues. Here is relevant information about installing a windshield: 1. Effects of improper windshield installation on the car: If the adhesive on both sides of the windshield does not bond tightly with the glass, it can negatively affect the car. For example, during high-speed driving, wind may enter through gaps between the windshield and the car body, increasing cabin noise. Additionally, when driving on bumpy roads, you may hear rattling or knocking sounds from the front of the car. 2. Precautions when replacing a windshield: (1) To prevent leaks of wind or water, avoid washing the car for three days. After three days, remove the tape securing the windshield. (2) Drive smoothly, avoiding sudden braking and rapid acceleration. (3) Try to avoid excessively bumpy roads to prevent the windshield from shifting. (4) Keep the maximum speed below 80 km/h and avoid highway driving. (5) After replacing the rear windshield, do not open the windows while driving for the first three days to prevent the rear windshield from shifting due to wind pressure. (6) Do not insert parking permits or other cards into the gap between the windshield and the dashboard.

18

0

Share

Is it meaningful to upgrade from 17-inch to 18-inch wheels?

For family cars, upgrading from 17-inch to 18-inch wheels is not meaningful and modification is not recommended. Below are the relevant details about wheel modification: 1. Impact of wheel modification: It will significantly affect the vehicle's mileage calculation. Since the vehicle calculates mileage using wheel speed sensors, increasing the wheel size lengthens the circumference. Now, one rotation of the tire is equivalent to slightly more than one rotation before modification, causing the odometer to display a lower mileage than actual. After increasing the wheel size by one inch, the vehicle may face issues during annual inspections, as traffic laws prohibit unauthorized modifications, making such modifications illegal. Violating these laws means modified wheels cannot pass annual inspections. 2. Precautions for wheel modification: After modifying the wheels, you should register the changes with the vehicle management office within 10 days. Failure to do so may result in penalties from traffic police during road use. Once inspected and approved by the vehicle management office, you can obtain a new vehicle license and use the car normally.

7

2

Share

Is Dry Ice Cleaning Necessary for Engine Carbon Deposits?

Dry ice cleaning is a relatively safe technology for removing engine carbon deposits and can be used when carbon buildup occurs in vehicles. Below is a detailed introduction to dry ice cleaning for engine carbon deposits: 1. Principle: It primarily utilizes the high-pressure gas from an air compressor as a carrier, with dry ice particles serving as the accelerating medium. The air compressor propels the dry ice particles onto the carbon deposits that need cleaning. Dry ice cleaning can thoroughly remove carbon deposits from the engine without causing damage or requiring engine disassembly. The cleaning process involves spraying the surface with a cleaning machine, utilizing the sublimation and melting effects of momentum to remove surface contaminants. 2. Cleaning Time: Due to its non-toxic, pollution-free, dry, water-free, and chemical-free nature, dry ice cleaning is gentle on metals and plastics without causing damage. Cleaning a single engine cylinder typically takes about one minute, while cleaning the entire engine compartment takes approximately five minutes. The cleaning results can be inspected using an endoscope, making it a fully visible cleaning process.

19

3

Share

What are the types of Shell fully synthetic lubricants?

Shell fully synthetic lubricants include Ultra and HX8. Shell has a classification of five different colored packaging barrels, each representing different uses and grades, and is designed for vehicles of varying levels. These are: Gray Shell, Blue Shell, Yellow Shell, Red Shell, and White Shell. More details are as follows: 1. Gray Shell is divided into Ultra and HX8, both of which are fully synthetic oils; Blue Shell is a semi-synthetic oil, Yellow Shell is divided into HX6 and HX5, where HX6 is a semi-synthetic oil and HX5 is a mineral oil; Red Shell HX3 and White Shell HX2 are mineral oils. 2. HX is the series code for Shell lubricants, and the number following HX indicates the higher the grade of the series. Common HX5 and HX6 are Yellow Helix, also known as Yellow Shell. HX5 is the highest grade of Shell mineral oil, while HX6 is a semi-synthetic oil, albeit the lowest grade among semi-synthetics. 3. HX7 is Blue Shell, commonly used for passenger cars, and is the highest grade among Shell's semi-synthetic oils. A step above is Ultra, also known as Gray Shell or Gray Helix, which is Shell's highest-grade fully synthetic oil, belonging to the hydrogen cracking + hydrogen isomerization-based Group III synthetic category.

5

Share

How is the Aisin 8AT transmission?

What is the difference between CVT and ECVT, and which one is more durable?

Does Using Air Conditioning in the Car Consume More Fuel in Summer?

What Are the Effects of Replacing a Car's Windshield?

Is it meaningful to upgrade from 17-inch to 18-inch wheels?

Is Dry Ice Cleaning Necessary for Engine Carbon Deposits?

What are the types of Shell fully synthetic lubricants?

Can a tire still be used after driving 5+ km without air?

What does 300TGI mean?

What is the difference between vehicle body crossing the line and pressing the line?

Can an Automatic License Drive a Manual Car?