How is speeding determined?

How many cylinders does the BMW X2 engine have?

BMW X2 uses a 1.5-liter three-cylinder turbocharged engine and a 2.0-liter four-cylinder turbocharged engine. About BMW X2: 1. BMW X2 is a compact SUV. 2. The body dimensions are 4379*1824*1555mm. 3. In terms of power: BMW X2 offers a choice between a 1.5-liter three-cylinder turbocharged engine and a 2.0-liter four-cylinder turbocharged engine. The 1.5-liter version has a maximum horsepower of 140 hp, while the 2.0-liter version has a maximum horsepower of 192 hp. 4. In terms of transmission: BMW X2 offers a choice between a 7-speed dual-clutch and an 8-speed automatic transmission. 5. In terms of drivetrain: BMW X2 offers a choice between front-wheel drive and four-wheel drive. 6. In terms of fuel consumption: According to the Ministry of Industry and Information Technology's combined fuel consumption data, the 1.5-liter version of BMW X2 has a combined fuel consumption of 5.8L/100km, while the 2.0-liter version has a combined fuel consumption of 6.1L/100km.

11

5

Share

Reasons for the Buzzing Sound Inside the Baojun 730 When the Air Conditioner is On

The noise from the Baojun 730's air conditioner mainly originates from various factors such as bearings, fan blades, and motor dynamic balance, all of which are related to the mechanical processing of the motor and fan. Here is some relevant information about the Baojun 730: 1. Introduction to the Baojun 730: The Baojun 730 is a 7-seat family car customized by SAIC-GM-Wuling for the needs of millions of users, tailored for 'China's big families.' On March 1, 2019, the 2019 Baojun 730-CVT version was officially launched, including two models: the 1.5T-CVT Fashion and the 1.5T-CVT Flagship. 2. Powertrain of the Baojun 730: The Baojun 730-CVT version is equipped with a 1.5T turbocharged engine paired with a simulated 8-speed CVT continuously variable transmission. The turbocharger of this engine uses the latest generation turbocharger from the internationally renowned supplier Honeywell. The engine's rated power is 111kW, with a maximum net torque of 250N·m. The engine's turbo can engage at around 1000 rpm and reach the maximum torque of mainstream 2.4L naturally aspirated engines on the market at 1600 rpm.

5

0

Share

Can a military driver's license be extended?

Military driver's licenses can be extended for the following reasons: 1. If a motor vehicle driver is unable to complete the renewal or inspection of their driver's license within the specified time due to military service or going abroad (overseas), they can apply for an extension at the vehicle management office where the driver's license was originally issued after submitting a physical condition certificate. 2. When applying, the applicant must fill out an application form and submit their identity proof, driver's license, and proof of the reason for the extension. Materials required for extending the inspection and renewal of a driver's license: 1. "Motor Vehicle Driver's License Application Form." 2. Proof of the reason for the extension, which should include the applicant's name, driver's license number, file number, reason for the extension, and the duration. 3. For military service cases, submit enlistment proof. If this cannot be provided, the applicant can use an "Officer's Certificate," "Soldier's Certificate," or enlistment proof issued by the current military unit. For those going abroad (overseas), submit a passport or exit proof for Hong Kong, Macau, or Taiwan regions. 4. A valid driver's license and personal identity proof.

18

2

Share

Is There a Three-Way Catalytic Converter Inside a Motorcycle Exhaust Pipe?

Motorcycle models compliant with China's National III emission standards and later are equipped with three-way catalytic converters. The three-way catalytic converters on motorcycles are different from those on cars due to differences in engines, calibrations, and the composition ratios of exhaust gases, resulting in different catalysts. According to the regulations of the Ministry of Environmental Protection of the People's Republic of China, not every motorcycle currently has one. How to judge the condition of a three-way catalytic converter: Visual inspection. Check the exterior of the three-way catalytic converter for damage or stains. If there are scratches, cracks, etc., it is likely that the catalytic converter has been damaged. If there are noticeable gray spots in the center of the catalytic converter's protective cover, severe discoloration spots, or purple stains on the shell, it may indicate overheating issues. Observe engine exhaust conditions. Place your hand near the exhaust pipe outlet to feel the exhaust flow and check if the three-way catalytic converter is clogged or if there are exhaust flow issues. Another method is to open the air filter, remove the filter element, and observe if there is exhaust backflow during rapid acceleration, indicating poor exhaust flow. To assess the condition of the TWC (Three-Way Catalyst), check if the secondary air injection pump is faulty. Use an infrared thermometer. Compare the temperature difference before and after the TWC using an infrared thermometer. If the temperature difference between the inlet and outlet of the three-way catalytic converter is less than 10°C, the TWC is damaged.

6

5

Share

Which Gear is Forward in an Automatic Transmission?

Automatic transmission D gear, L gear, and S gear can all move forward. The following are specific introductions to car gears: 1. P gear is the parking gear: When the gear lever is in the P gear position, the transmission is in neutral inside, but the output shaft is mechanically locked. At this time, the car will stop in place even without stepping on the brake. It is generally used for long-term parking of the car. When shifting into P gear, the car must be completely stationary. Do not shift into P gear when the car has not come to a complete stop, and the handbrake must be engaged. When parking on a slope, the handbrake should be engaged first before shifting into P gear. 2. R gear is the reverse gear: When the gear lever is in the R gear position, the rotation direction of the transmission output shaft is opposite to that of the engine, allowing the car to move backward. When shifting into R gear, the car must be completely stationary. Do not shift into R gear when the car has not come to a complete stop. 3. N gear is the neutral gear: When the gear lever is in the N gear position, the gears inside the transmission are idling, and the clutch is not engaged, so the load on the transmission is minimal at this time. N gear is generally used for short-term parking. In addition, when towing the car, the transmission should also be put in N gear. 4. D gear is the driving gear: When the gear lever is in the D gear position, the gears inside the transmission automatically switch between the lowest and highest gears according to factors such as vehicle speed and throttle opening, based on the preset shifting pattern. In the vast majority of cases, D gear can be used for driving.

12

2

Share

What to Use for Repairing Leaks in the Truck Cabin?

Here are several methods to deal with leaks in the truck cabin: Severe leaks: If the roof of the van is severely leaking, argon arc welding should be used for repair. Do not use electric welding, as the roof of the van is relatively thin, and electric welding can easily cause more extensive damage. Minor leaks: If the leak is not severe, car putty or silicone sealant can be used to seal the gaps. However, the only drawback is that the durability is not strong, and leaks may reappear after a long time. Analysis of causes for leaks in vans: Overloading beyond the specified tonnage, causing the cabin to twist and deform. Rust and paint peeling off the cabin without timely repairs. Aging and falling off of rubber sealing strips in the cabin. Cracks and weld separation at the bottom of the cabin, allowing water to splash in during driving. Failure to close the cabin door during rainy days. Deformation of the cabin locking mechanism, preventing the door from sealing tightly. Electric carts and forklifts entering the cabin during loading, causing severe deformation. Truck cabin maintenance: Cleaning: After long-distance driving and exposure to wind and sun, dirt, dust, and oil stains may appear on the truck body. To clean these marks, simply use a clean cloth and gasoline to wipe them off. After the gasoline evaporates, wipe the body with a clean damp cloth. Wash the truck promptly after rain: Acidic substances in rainwater can corrode the truck's paint. Therefore, wash the truck promptly after rain and park it in a shaded area to prevent direct sunlight from causing the paint to peel. Apply engine oil or lubricating oil: To prevent metal from rusting, apply engine oil or lubricating oil to areas prone to corrosion or wrap them with oil paper. Direct sunlight can cause rapid aging and deformation of rubber products on the truck, affecting their performance.

8

4

Share

How is speeding determined?

How many cylinders does the BMW X2 engine have?

Reasons for the Buzzing Sound Inside the Baojun 730 When the Air Conditioner is On

Can a military driver's license be extended?

Is There a Three-Way Catalytic Converter Inside a Motorcycle Exhaust Pipe?

Which Gear is Forward in an Automatic Transmission?

What to Use for Repairing Leaks in the Truck Cabin?

Which provinces use ethanol gasoline?

What are the engine displacements available for the Bestune T77?

What is the national standard for automotive diesel?

Does Vehicle Damage Insurance Cover Water-Soaked Cars?