How is speeding by 10% calculated?

What is the fuel consumption of the Haval M6 Plus?

The comprehensive fuel consumption of the Haval M6 Plus is 6.9-7.1L/100km. There are currently 7 models of the Haval M6 Plus on sale: the Elite Smart Connect, Luxury Smart Connect, Liu Yan Special Edition, and Premium Smart Connect, with a comprehensive fuel consumption of 6.9L/100km. The manual Liu Yan Special Edition, manual Elite Smart Connect, and manual Luxury Smart Connect have a comprehensive fuel consumption of 7.1L/100km. The above figures are NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 7.2-9.5L/100km. Here are 5 tips to help reduce fuel consumption while driving: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can significantly increase fuel consumption. Light acceleration, light braking, and early braking: While driving, gently press the accelerator to avoid sudden increases in engine RPM and prevent the car from shaking, making it more fuel-efficient. By anticipating road conditions and accelerating or braking slowly and smoothly, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep the tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (equivalent to about 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or vehicle checks: Timely oil changes can reduce carbon buildup (carbon buildup can cause ignition issues, sluggish acceleration, increased fuel consumption, and even cylinder misfires in severe cases). Regularly check and replace the air filter when dirty, and clean or replace the fuel injectors, spark plugs, and throttle body at the recommended intervals. Close the windows while driving. Driving with the windows open increases wind resistance, which in turn increases the resistance the car faces, requiring more power and thus increasing fuel consumption.

17

0

Share

Why is it not recommended to install front parking sensors?

The reasons why front parking sensors are not recommended: 1. Aftermarket parts are prone to malfunctions, and the emitted radar signals may interfere with the engine's ignition signals, affecting engine performance; 2. Frequent false alarms from front sensors can disrupt the driver's judgment. Since front sensors are located near the engine compartment, their radar signals might interfere with normal engine operation, such as causing ignition signal disruption, leading to abnormal engine performance. However, the benefits of installing front sensors outweigh the drawbacks for some novice drivers who struggle with distance estimation, as front sensors can assist them in navigating narrow roads or making turns.

1

4

Share

What is the process for registering a new car?

The process for registering a new car is as follows: 1. Before registering at the vehicle management office, you must have the vehicle certificate, purchase invoice, and compulsory insurance policy. Make three copies of your ID card, vehicle certificate, purchase invoice, and compulsory insurance policy for backup; 2. Pay the purchase tax, which is paid at the purchase tax collection office. You need to provide your ID card and its copy, purchase invoice, and the original and copy of the vehicle certificate; 3. Prepare the original ID card in advance and make several copies for backup. Non-local residents need to provide the original and copy of their temporary residence permit, while organizations need to provide the original and copy of their organization code certificate; 4. After completing all the procedures, you can go to the vehicle management office to register and apply for a license plate. A specialized traffic police officer will inspect the vehicle, mainly checking the vehicle identification code, vehicle appearance, and warning triangle plate; 5. After the inspection, you can go to the vehicle management office hall to choose a license plate number or select one yourself; 6. After paying the fee, wait to receive the license plate. Once you have chosen a number and paid the fee, you can wait to receive the license plate.

9

0

Share

What is the solution for a car shaking left and right at low speed?

The solution for a car shaking left and right at low speed is: 1. If it's a new tire, perform dynamic balance and check again for shaking to rule out tire failure; 2. If it's an old tire and still shakes after dynamic balance, it might be caused by significant tire deformation or uneven wear. Tire dynamic balance is adjusted using lead weights. If the wear in the middle is inconsistent, dynamic balance may not solve the problem. Normally, tire dynamic balance lead weights can be precise up to 5 grams. If the vehicle vibrates, it's necessary to check the suspension system, tie rods, front wheel toe-in, and other issues; if it's shaking, inspect the suspension, tire pressure, front wheel bearings, and other parts; after inspection, perform a four-wheel alignment and check the steering gear, power assist mechanism, and whether the screws connecting the frame and suspension are loose.

8

4

Share

What to Do When the Tire Pressure Warning Light Comes On?

Solution for when the tire pressure warning light comes on: Stay calm and avoid panic. Immediately reduce your speed and avoid sharp steering or sudden braking, then pull over to check the tires. If you have a portable inflator or tire pressure gauge, you can move to the roadside to measure and inflate each tire. If not, drive slowly to the nearest auto repair shop or 4S store for assistance. The recommended front tire pressure is 2.2 to 2.3 bar when unloaded and 2.4 to 2.5 bar when fully loaded. The rear tire pressure should be 2.4 to 2.5 bar when unloaded and 2.6 to 2.8 bar when fully loaded. Note that tire pressure ranges may vary depending on the tire model, and the standard tire pressure is usually indicated by the manufacturer upon delivery.

19

0

Share

How to Set the Mirror Tilt Function When Reversing on a Golf?

Golf mirror tilt function setting method: 1. Power on the car but do not start the engine (press the start button without stepping on the brake); 2. Set the memory seats 1, 2, and 3 positions, select the seat position; 3. Choose the mirror you want to set, press the mirror adjustment selection button (left or right); 4. Step on the brake, shift to R gear, at this time the selected mirror will automatically tilt down to the factory preset position, press the 4-way adjustment button to adjust to the desired position; 5. Press and hold the seat memory button (1, 2, or 3) for about 2 seconds, whichever memory position you have selected; 6. Step on the brake, shift to P gear, and press the mirror adjustment selection button once more to complete the setting.

20

1

Share

How is speeding by 10% calculated?

What is the fuel consumption of the Haval M6 Plus?

Why is it not recommended to install front parking sensors?

What is the process for registering a new car?

What is the solution for a car shaking left and right at low speed?

What to Do When the Tire Pressure Warning Light Comes On?

How to Set the Mirror Tilt Function When Reversing on a Golf?

Should the Renault Koleos use 92 or 95 octane gasoline?

Is the failure rate of Volkswagen CC very high?

What features does the Haval Big Dog Labrador have?

What are the features of the Haval Big Dog Border Collie version?