How is speeding between 10% and 20% over the limit penalized?

What are the differences between Bora and Bora Legend?

The differences between Bora and Bora Legend are as follows: 1. Different prices: As a facelifted and upgraded product, the new Bora is priced higher than the Bora Legend. 2. Body dimensions: The new Bora is larger overall than the Bora Legend. This is because the new Bora is based on Volkswagen's new MQB platform, the same platform used for the new Sagitar and Lavida, while the Bora Legend still uses the PQ34 platform. As a result, the new Bora offers significantly better space and comfort compared to the Bora Legend. 3. Powertrain: Both models are equipped with the same engines, although there are slight differences in tuning. Additionally, they are identical in terms of transmissions, chassis steering, wheel braking, and active/passive safety features. In terms of control configurations, the Bora Legend has an additional cruise control function, which is its only advantage. On the other hand, the new Bora comes standard with LED daytime running lights across all trims, highlighting the differences between the two models.

8

3

Share

What is the ground clearance of the Golf when unloaded?

The ground clearance of the Golf when unloaded is 141mm. Ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the road surface, which indicates the vehicle's ability to overcome obstacles (such as stones, etc.). Below is a detailed introduction about the Golf's ground clearance: 1. Ground clearance is used to characterize the ability to pass obstacles. Whether a car can smoothly pass through uneven terrain is directly measured by its ground clearance, which also affects the vehicle's overall passability, dynamic stability, and even the coordination of its appearance. Both excessively high and excessively low ground clearance have certain drawbacks. 2. The minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the supporting plane when it is fully loaded and stationary, used to indicate the vehicle's ability to pass over obstacles such as stones and stumps without collision. The smaller the ground clearance, the worse the ability to overcome obstacles.

9

5

Share

Why Does Frost Form on the Inside of the Car's Windshield in Winter?

Frost forms on the inside of the car's windshield in winter due to the temperature difference between the inside and outside of the vehicle. Here are some extended solutions to address frost on the inside of the windshield: 1. Turn on the car's air conditioning, set it to external circulation or direct the vents toward the windows, and wait for the frost to melt. 2. Use a specialized plastic scraper for vehicle defrosting and snow removal to gently scrape the frost off the glass in one direction to avoid scratching it. 3. Use a defrosting spray, which is a high-speed anti-ice concentrated spray designed for frozen windows and wipers. It does not damage the car's surface and prevents re-icing and dirt buildup. 4. Use a dedicated frost cover to place over the vehicle. 5. Ventilate the car to equalize the interior and exterior temperatures, allowing the frost to naturally fade away.

8

1

Share

Which Geely models have four-cylinder engines?

Geely models with four-cylinder engines include the Geely Xingyue, Boyue, Emgrand, and Emgrand GL, among others. These four-cylinder vehicles demonstrate excellent power performance. Below is relevant information: 1. A four-cylinder vehicle is one equipped with a four-cylinder engine. 2. A four-cylinder engine, also referred to as a four-cylinder motor, is a machine that converts one form of energy into another more useful form. Automotive engines typically transform chemical energy into mechanical energy, encompassing gasoline engines, diesel engines, etc. 3. The cylinder is a crucial component of the engine, serving as the power source of the vehicle. Therefore, the engine can refer to both the power generation device and the entire machine including the power unit. The heat generated by gasoline combustion expands within the sealed cylinder, driving the piston to perform work and converting thermal energy into mechanical energy. Four-cylinder engines are commonly used in low-power machinery.

13

1

Share

What Does the Position Light Icon Look Like?

The position light icon consists of two opposing light bulbs. Position lights are the outermost lights located at the front and rear of a vehicle. Large trucks also have position lights on their roofs and sides. The term "position light" can be understood literally: "position" refers to warning, while "light" signifies outline. Therefore, position lights serve as warning lights to alert other vehicles. Installed along the edges of a vehicle's roof, these lights indicate both the height and width of the vehicle. Below is a classification of automotive lights: 1. Headlights: Combined headlights are located at the front of the vehicle, primarily serving illumination and signaling purposes. The light emitted by headlights illuminates the road ahead, enabling safe driving at night. 2. Combined taillights: Positioned at the rear of the vehicle, these lights also serve illumination and signaling functions. 3. Turn signals: Used to indicate left or right turns to other road users. Regulations require these to be amber in color. 4. License plate lights: These lights illuminate the license plate, allowing for identification of the vehicle's registration number in the dark.

4

2

Share

Why does the Hyundai Elantra's brake pads get hot?

Modern Hyundai Elantra brake pads heat up due to frequent braking, which causes the temperature of the brake discs and pads to rise. The principle of braking is to convert mechanical energy into thermal energy. Typically, whether the brake warning light on the dashboard is illuminated is used as a criterion for replacing the brake pads. Relevant information about brake pads is as follows: 1. Brake pads are also called brake linings. In a car's braking system, brake pads are the most critical safety components, and all braking performance is decisively influenced by the brake pads. 2. Brake pads (brake-lining) are generally composed of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process uses an SMT-4 oven temperature tracker to monitor the temperature distribution during the coating process to ensure quality.

3

Share

How is speeding between 10% and 20% over the limit penalized?

What are the differences between Bora and Bora Legend?

What is the ground clearance of the Golf when unloaded?

Why Does Frost Form on the Inside of the Car's Windshield in Winter?

Which Geely models have four-cylinder engines?

What Does the Position Light Icon Look Like?

Why does the Hyundai Elantra's brake pads get hot?

How to Remove the Rear Seats of the Honda Breeze?

What does the exclamation mark inside a triangle mean?

How much over the speed limit is driving 90 in a 70 zone? How many points will be deducted?

Can the Mazda Axela radiator frame shake?