How is PDK transmission oil?

Will the Car Lock with the Key Inside?

Yes, the car can lock with the key inside. Here is relevant information about car keys: 1. Battery replacement interval: Car key batteries are typically button cells that need replacement every one and a half years, while cylindrical bidirectional remote batteries require replacement approximately every six months. 2. Reception range: The maximum reception distance is about 50 meters, achievable only under conditions without any electronic interference or physical obstructions. The optimal signal reception usually occurs within a range of 10+ meters, where the signal is strongest and most easily received. 3. Working principle: The key emits a weak radio wave, which is received by the car's antenna. The electronic control unit (ECU) then identifies the signal code, and the system's actuator (motor or electromagnetic coil) executes the locking/unlocking action.

12

2

Share

Are Car Air Purifiers Effective?

Car air purifiers are effective as they can clean the air inside the vehicle, filtering out bacteria, dust, and absorbing formaldehyde from new cars. Also known as automotive air purifiers or vehicle air purifiers, these devices are specifically designed to purify PM2.5, toxic gases, odors, and bacteria in the car's air. They typically consist of a high-voltage circuit negative ion generator, a micro-fan, and an air filtration system. The working principle of a car air purifier is as follows: the micro-fan inside the device circulates the air in the car. Polluted air passes through the PM2.5 filter and activated carbon filter inside the purifier, where various pollutants are filtered or absorbed. The air is then continuously ionized by the negative ion generator installed at the air outlet, producing a large number of negative ions. These negative ions are blown out by the micro-fan, forming a negative ion airflow that achieves the purpose of cleaning and purifying the air.

13

1

Share

What does 'service' mean on a car?

Service on a car indicates: When the vehicle has traveled a certain distance, a service indicator or a small wrench symbol will appear on the dashboard to remind the user that the car needs maintenance or replacement of certain worn parts. After the maintenance is completed, the service reminder light can only be turned off by following a specific reset procedure. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. The purpose of car maintenance is to keep the vehicle clean, ensure normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.

7

5

Share

What Causes the Brake Pedal to Be Hard to Press and the Car Unable to Start?

The reason the brake pedal is hard to press and the car cannot start is due to a faulty brake light switch or brake light. Precautions when braking: 1. Gently press the brake pedal and adjust the braking force according to the speed of the vehicle in front; 2. If there is sufficient braking distance, press the brake pedal slowly and continuously to decelerate evenly. As the vehicle comes to a stop, gradually release the brake pedal until it is fully released when the vehicle is stationary; 3. When you notice the vehicle in front starts braking, place your foot on the brake pedal and apply steady pressure to decelerate smoothly until your speed matches that of the vehicle in front. Maintain the brake pedal position and adjust the braking force based on the speed changes of the vehicle in front; 4. In an emergency, press the brake pedal firmly to the floor until the danger is resolved.

6

5

Share

Where is the A-pillar of a car located?

The A-pillar of a car refers to the pillars on both sides of the front windshield, connecting the two front doors and the engine compartment. Functions of the A-pillar: 1. Securing the front windshield, working together with the front edge of the car's hood and the roof to hold the windshield in place; 2. Ensuring body rigidity, preventing secondary injuries to the driver in the event of a rollover accident, and to some extent, maintaining vehicle stability. Points to note about the A-pillar blind spot: 1. Control your speed, as higher speeds make the blind spot more hazardous; 2. Ensure a safe speed when turning, lean your upper body significantly to check road conditions, keep a firm grip on the steering wheel, and lean forward or backward as much as possible to observe the rearview mirror and surrounding traffic conditions.

20

2

Share

Why is the ETC tag expired?

The reasons for the ETC card expiration may include self-removal or relocation of the OBU device, ETC power depletion, or detachment/loosening of the ETC electronic tag. Below are relevant details about ETC: 1. Installation position: Height should be no less than 1.2 meters and no more than 2.5 meters. The installation angle N should be between 30º and 90º (the angle between the electronic tag surface and the horizontal plane). 2. Transaction position: The ETC transaction sensing range is 8 meters. When encountering a stationary vehicle ahead, to prevent issues with the preceding vehicle's ETC device or absence of an ETC device, maintain a distance of more than 10 meters to avoid automatic fee deduction for the preceding vehicle.

12

3

Share

How is PDK transmission oil?

Will the Car Lock with the Key Inside?

Are Car Air Purifiers Effective?

What does 'service' mean on a car?

What Causes the Brake Pedal to Be Hard to Press and the Car Unable to Start?

Where is the A-pillar of a car located?

Why is the ETC tag expired?

Can the plug of a dash cam be replaced?

What to Do When the Vehicle Horn Gets Water In It?

What is the correct way to use an exhaust brake?

Where is MG produced?