How is overloading a 7-seater minivan by 16 people penalized?

1 Answers
MorganLee
07/29/25 9:42pm
If it involves illegal operation, penalties are based on the proportion of overloading: fines for less than 20%; fines for 50%, and possible administrative detention. According to relevant Chinese laws, the penalty for overloading a 7-seater minivan depends on the specific circumstances of the overloading.
Was this review help?
2
3
Share
More Forum Discussions

What Causes the ABS Light to Illuminate in a Ford Focus?

ABS light illumination can occur in various states, with different causes and solutions for each state, as detailed below: State 1: ABS warning light remains constantly illuminated (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by mud, sludge, or other contaminants, affecting its ability to detect the corresponding speed signal. This prevents the ABS control unit from determining the vehicle speed and wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the tone ring to restore normal function. Cause 2: Poor signal transmission due to loose system wiring connections or faulty ABS relay contacts. Solution: Inspect wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical components are in use, the battery voltage drops below 10.5V. The ABS warning light turns off as engine speed increases and voltage rises. This may also occur due to insufficient power supply voltage to the ABS system, such as poor terminal contact or grounding issues. Solution: Check battery specific gravity; inspect the charging system; examine power supply components (e.g., voltage relay or poor power contact). State 3: ABS warning light remains illuminated after engine start until engine is turned off (IGFF). Cause: Poor grounding connection of ABS hydraulic valve body; poor electrical connector contact at ABS hydraulic valve body; ABS control unit malfunction. Solution: Loosen and retighten the hydraulic valve body grounding screw, cleaning contact surfaces if necessary; check for enlarged connector gaps; replace ABS or ABS/ASR control unit. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS control unit detects a significant discrepancy between rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's specified tire and wheel rim sizes, typically listed on the fuel filler cap sticker. State 5: ABS warning light intermittently illuminates. Cause: Improper brake light switch adjustment; poor internal contact in brake lights. Solution: With engine running, fully depress brake pedal and manually push the brake switch linkage downward to complete self-setting; replace brake light switch if necessary. When the ABS warning light is illuminated, it is recommended not to continue driving as this indicates a malfunction in the anti-lock braking system. During emergency braking, if wheels lock up, the vehicle may skid uncontrollably, preventing the driver from decelerating or adjusting the vehicle's trajectory, posing significant safety risks.
14
0
Share

How to Reset the Tire Pressure System?

Tire pressure system reset method: 1. Hold the reset button when the ignition switch is off; 2. Turn on the ignition switch; 3. Release the reset button and briefly press the clock adjustment button once; 4. The maintenance cycle display will be in reset mode, wait a few seconds to complete the reset. Tire pressure refers to the air pressure inside the tire. The tire pressure monitoring sensor is installed inside the tire or outside the valve stem. The tire pressure monitor is a simple tire pressure monitoring system that uses the ABS sensing function to compare the rotation counts of the tires. A tire with insufficient pressure will have a shorter circumference, and if one of the four tires has insufficient pressure, its rotation count will differ from the others during driving.
16
1
Share

How to turn off the auto start-stop function on Cadillac XTS?

To turn off the auto start-stop function on Cadillac XTS, simply press the auto start-stop button before driving. The Cadillac XTS has the following dimensions: length 5103mm, width 1852mm, height 1502mm, with a wheelbase of 2837mm and a fuel tank capacity of 70 liters. The Cadillac XTS is equipped with a 2.0T turbocharged engine, delivering a maximum power of 198 kW and a maximum torque of 353 Nm, paired with a 6-speed automatic transmission. It features a front MacPherson strut independent suspension and a rear multi-link independent suspension.
10
5
Share

What is the reason for the loose handbrake in the Skoda Kamiq?

It could be due to the simplified return spring. Return spring: A spring that returns the engaging components to their initial position after the compressive force is removed. Function of the spring: It absorbs external energy and stores it in the form of potential energy. The clutch system uses many springs, most of which are coil springs. The characteristic of coil springs is that they can bear tension or compression. The return spring of the internal piston in the clutch master cylinder bears pressure and rebounds, while the return spring of the external pedal can be designed to bear either pressure or tension, depending on the design.
5
1
Share

How early can I renew my driver's license? Three months or 90 days?

You can renew your driver's license up to 90 days in advance. Below is relevant information about driver's license renewal: 1. Renewal period: The renewal period is within three months before expiration. If you have maintained a good record without accumulating 12 penalty points, you can renew it to a 10-year valid license. Driving with an expired license is prohibited; you must obtain a new license before driving. 2. Required materials: Necessary documents include your original ID card, ID card copy, original driver's license, medical examination certificate, and a one-inch photo.
11
2
Share

Are All Alto Models Equipped with Three-Cylinder Engines?

The Alto is equipped with a three-cylinder engine. Safety-related shortcomings of the Alto: Most models lack airbags and ABS, and their collision resistance is relatively weak. The vehicle struggles to stop effectively at higher speeds. Additionally, it suffers from insufficient power due to its small 0.8-liter engine displacement, making few drivers dare to reach the manufacturer's claimed top speed of 120 km/h. Regarding features: The configuration is relatively basic. The absence of power steering makes steering this compact car quite strenuous. The radio and cassette player occasionally experience issues like signal loss or playback distortion. Passengers may also notice significant surrounding noise inside the vehicle.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.