How is driving against traffic generally photographed and identified?

What are the reasons for no response when pressing the remote car key?

It could be due to a dead battery in the car key or signal interference near airports or radio transmission towers. Additionally, the vehicle may not respond if it is out of fuel or has a dead battery. Specific explanations are as follows: 1. Dead battery in the remote key: If you find no response when unlocking or locking the car with the remote key and notice that the small light on the key does not flash, it is likely that the battery inside the key is dead and needs replacement. Although the remote key is out of power, the mechanical key hidden within the remote key can still unlock or lock the car. If you have time, replacing the remote key battery at a 4S shop takes only about ten minutes. 2. Too much interference in the parking area: Due to strong radio interference, the signal from the remote key cannot be successfully received by the vehicle. In this case, move the vehicle to a farther location and then try the key's function again. 3. Presence of jammers or criminals nearby: Many criminals often use a device called a jammer to emit electromagnetic waves of the same frequency, actively interfering with the signal from the remote key. In such situations, pressing the remote key will yield no response. If the car owner does not pay attention to the lock signal after pressing the lock button or fails to pull the door handle to confirm, it provides an opportunity for nearby criminals to take advantage.

1

2

Share

What is the usage method of automatic tire repair fluid?

The usage method of automatic tire repair fluid is: 1. Shake the tire repair fluid well, then lift the outer tube; 2. Align the tube opening with the tire valve and tighten it; 3. Tear off the fixing ring on the top of the bottle and open the switch; 4. You can see white liquid being injected into the tire from the tube. After inflation, close the valve by turning it counterclockwise. The working principle of automatic tire repair fluid is: The automatic tire repair fluid is a white foam-like liquid, which is a polymer compound compressed in large quantities in the bottle. It can be injected into the tire through the valve to inflate the tire. After the tire repair fluid is injected, the centrifugal force generated by the car's movement can spread the fluid evenly on the inner side of the tire, forming a sealing film that serves the purpose of tire repair.

11

5

Share

Where is the starting line for reverse parking?

The starting line for reverse parking is a yellow line. Below are detailed instructions for reverse parking techniques: 1. Identify the starting point: Taking right-side reverse parking as an example, the vehicle should maintain a distance of 1.2-1.8 meters from the left line at the starting position, with the steering wheels aligned straight and the vehicle body parallel to the left line. When reversing, use the lower edge of the left rearview mirror as a reference. When the two align, turn the steering wheel fully to the right and continue reversing. 2. Control the corner point: Observe the right rearview mirror. When the corner point of the parking space is visible, pay attention to the changing distance between the corner point and the vehicle body. When the distance is less than 30 centimeters, turn the steering wheel back halfway and continue reversing. Once the vehicle body enters the parking space and aligns parallel with the parking lines, turn the steering wheel back one full turn. If the distance is not less than 30 centimeters, do not turn the steering wheel back and continue reversing until the vehicle body is parallel with the parking lines, then turn the steering wheel back one and a half turns at once. 3. Align the stopping point: The stopping point is the parking spot after entering the parking space. The reference method is the same as for the starting point. When the lower edge of the left mirror aligns with the shoulder line of the parking space, stop the vehicle.

13

0

Share

How to Turn Off the Tire Pressure Light on a Lexus?

To turn off the tire pressure light on a Lexus, follow these steps: 1. Open the glove box on the passenger side and locate the button next to the passenger airbag key switch. 2. With the ignition turned on, press and hold the button until the tire pressure light turns off. Taking the 2020 Lexus ES as an example, it is a mid-to-large-sized sedan with body dimensions of 4975mm in length, 1866mm in width, and 1447mm in height, with a wheelbase of 2870mm. The 2020 Lexus ES features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 2.5L naturally aspirated engine, delivering a maximum horsepower of 178PS, a maximum power of 131kW, and a maximum torque of 221Nm, paired with an electronic continuously variable transmission.

5

1

Share

Where to Add Transmission Fluid for Hyundai Mistra?

Modern Mistra transmission fluid is located on the upper housing of the transmission. There is a 22 plastic screw; removing it reveals the transmission fluid filler port. Taking the 2021 Hyundai Mistra as an example, it is a mid-size sedan with body dimensions of 4780mm in length, 1815mm in width, and 1460mm in height, a wheelbase of 2770mm, and a curb weight of 1357kg. The 2021 Hyundai Mistra features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 170PS, a maximum torque of 253Nm, and a maximum power of 125kW, paired with a 7-speed dual-clutch transmission.

11

2

Share

Will the car charge if it is started but not driven?

When the car is started but not driven, it will charge, but the charging effect is poor and it takes a long time to fully charge the battery. The instantaneous power consumption during car startup is relatively high, and it takes a long time to replenish the battery's power. If the car is not driven for a long time, you can disconnect the negative terminal of the battery to avoid battery drain. The functions of the battery are: 1. When starting the engine, the battery supplies power to the starting system, ignition system, and electronic fuel injection system; 2. When the engine is stopped or idling at low speed, it powers the car's electrical equipment; 3. When the generator's output is insufficient, it can assist in supplying power to the electrical equipment; 4. It mitigates voltage surges in the electrical system and protects the car's electronic devices; 5. It can store excess electricity generated by the alternator.

3

4

Share

How is driving against traffic generally photographed and identified?

What are the reasons for no response when pressing the remote car key?

What is the usage method of automatic tire repair fluid?

Where is the starting line for reverse parking?

How to Turn Off the Tire Pressure Light on a Lexus?

Where to Add Transmission Fluid for Hyundai Mistra?

Will the car charge if it is started but not driven?

Is Personal Presence Required for Auto Insurance Transfer?

What are the causes of sunroof noise?

What are the differences between the Mercedes-Benz CLA and the Mercedes-Benz GLA?

How to Solve the Problem of Fogging on the Outside of Car Windows in Summer?