How is car glazing done?
3 Answers
Car glazing process is as follows: 1. Car washing: Use neutral detergent because alkaline cleaners can corrode car paint. If residues remain in body gaps, the corrosiveness is even greater. It's recommended to use neutral car shampoo to avoid damaging the paint. 2. Dewaxing: Clean the car body and remove dirt like asphalt or wax layers. Use professional car washing fluid to thoroughly remove residual liquids and wax. 3. Polishing: Control the rotation speed and humidity of the polishing disc during polishing, paying attention to paint surface temperature and edges. After polishing, clean the entire vehicle with pure cotton towels. 4. Glazing: It's best not to perform glazing under sunlight. Shake the product thoroughly until uniform, then pour it directly onto the car body. Use a clean soft cloth to make quick, forceful circular motions until the mirror glaze disappears and gloss appears. This step can be done using a glazing machine for optimal results.
I just had my car polished with glaze last month, and the process wasn't too complicated but required attention to detail. First, the car was thoroughly washed to remove dirt, otherwise the glaze layer wouldn't adhere well. Then, a polishing machine was used to gently buff the paint surface, removing oxidation and minor scratches, which improves the glaze's adhesion. Next, the glaze liquid was evenly applied using a sponge or professional tool, starting from the roof and covering one section at a time to ensure uniform coverage. After application, it was left for a few minutes to semi-dry before being wiped to a shine with a clean polishing cloth. The whole process took over two hours, and I noticed a significant improvement in the paint's glossiness and better resistance to UV rays and minor scratches after glazing. Beginners are advised to find a partner to help, avoiding prolonged pauses that could lead to dust accumulation. For regular maintenance, doing it every six months to a year is sufficient—too frequent would be wasteful. The key is to choose high-quality glaze products; don't skimp on cost as cheaper options may peel off and affect the results. After glazing, be cautious when washing the car and avoid strong alkaline detergents to prevent damaging the glaze layer.
I prefer doing car detailing myself, and the steps for applying glaze mainly consist of cleaning, polishing, and glazing. First, the car must be washed thoroughly using a neutral car shampoo, then dried with a soft cloth. Before polishing, inspect the paint condition—deep scratches should be addressed first. A low-speed polisher is safer for polishing. For glazing, I use liquid glaze, pouring it onto a small sponge and applying it evenly across the entire body, ensuring no corners are missed. After the glaze dries, polish it to a shine, wearing gloves to avoid hand oils affecting the finish. The tools needed include a polisher, sponge, glaze liquid, and cleaning cloths, all available at auto shops. Glazing enhances paint gloss, improves stain resistance, and prevents rainwater from sticking. DIY saves money compared to expensive professional services, but avoid working under direct sunlight as high temperatures can cause uneven clumping. Choose glaze based on packaging instructions—some fast-drying types are ideal for DIY. Wash the car gently afterward, avoiding direct high-pressure water jets to prolong the glaze's durability.
