How High is the Temperature Inside a Car in Summer?

2 Answers
McJade
07/28/25 4:22pm
When a car is parked outdoors in 40℃ high temperature and exposed to direct sunlight for a long time, the interior temperature can exceed 70 degrees, with a maximum reaching 90 degrees. It is advisable to park the car in a shaded area where sunlight cannot directly hit it. If parking outdoors is unavoidable, you can use a car cover or apply reflective sunshade film on the windshield. Here are some methods to deal with high temperatures inside the car: 1. Physical cooling. 2. Open three sides for ventilation. 3. Lower the passenger window and repeatedly open and close the driver's door. 4. After getting in the car, turn the external circulation to maximum to expel the hot air from the interior.
Was this review help?
12
3
Share
VonCarson
08/11/25 11:17pm
As a parent, I'm deeply concerned about temperature safety inside cars during summer. On scorching afternoons, vehicle interior temperatures can skyrocket to 60°C or even above 70°C - far exceeding outdoor temperatures, which may cause heatstroke or burns to children or pets within minutes. I've read studies showing that when outdoor temperature is 30°C, car interiors can reach 50°C in just 15 minutes and exceed 65°C within 30 minutes. Seats and seatbelts become too hot to touch, while interior components like plastic dashboards may soften and deform. Once I nearly left my child's toy in the car - the thought of potential consequences still haunts me. Now I always test seat temperature with the back of my hand before letting children enter. Additionally, high temperatures accelerate the release of harmful gases from car interiors, creating respiratory hazards. Therefore, I never leave children or pets unattended in parked vehicles - not even for seconds.
Was this review help?
12
3
Share
Expand All
More Forum Discussions

Is the Motorcycle Subject 2 Test Normally Conducted on Rainy Days?

Motorcycle Subject 2 tests are normally conducted on rainy days. Generally, it is very rare for tests to be rescheduled due to weather conditions. Unless there is a thunderstorm or other secondary disasters, the test center will suspend the test arrangements in response to national prevention and control requirements. Otherwise, the test center will conduct the test as usual during ordinary rainy days. The following is an introduction to motorcycle driving licenses D, E, and F: 1. License D: License code: D, Age of application: 18-60 years, Vehicle type permitted: ordinary two-wheeled motorcycle, Permitted vehicle types: three-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed greater than 50km/h, Other permitted vehicle types: E, F, Annual physical examination: Not required for those under 60 years old, Test vehicle requirements: At least a four-speed ordinary three-wheeled motorcycle or ordinary side three-wheeled motorcycle. 2. License E: License code: E, Age of application: 18-60 years, Vehicle type permitted: ordinary two-wheeled motorcycle, Permitted vehicle types: two-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed greater than 50km/h, Other permitted vehicle types: F, Annual physical examination: Not required for those under 60 years old, Test vehicle requirements: At least a four-speed ordinary two-wheeled motorcycle. 3. License F: License code: F, Age of application: 18-70 years, Vehicle type permitted: light motorcycle, Permitted vehicle types: motorcycles with an engine displacement less than or equal to 50ml and a maximum design speed less than or equal to 50km/h, Other permitted vehicle types: Only F, no other permitted vehicle types, Annual physical examination: Not required for those under 60 years old, Test vehicle requirements: Formulated by the traffic management department of the provincial public security authority.
1
4
Share

How Old Can a Child Be to Sit in the Front Passenger Seat?

Minors under the age of 12 are not allowed to sit in the front passenger seat. Although minors who are 12 years old or older can sit in the front passenger seat, it is best to use a child safety seat for added security. Pregnant women should also avoid sitting in the front passenger seat due to their body shape, as the seatbelt design does not adequately account for pregnant women. To minimize unnecessary harm, it is advised not to sit in the front passenger seat. Below are some relevant details about the front passenger seat: Reasons for not allowing sitting in the front passenger seat: Due to their smaller physique and immature bones, children are at risk of injury from the front airbags in the event of a collision. Penalties for children sitting in the front passenger seat: If a child under the age of 14 is seated in the front passenger seat, the driver will be penalized with 6 demerit points and a small fine. The front passenger seat is considered the most dangerous position, as during an emergency brake, parents are unable to provide timely safety protection to the child in that seat.
12
2
Share

What are the common engine layout types for regular family sedans?

Regular family sedans typically adopt four types of engine layouts, namely L-type, V-type, H-type, and W-type. Below are their respective introductions: L-type engine: Inline (Line Engine) engines refer to cylinders arranged in a straight line, where all cylinders are aligned side by side at the same angle within a single plane. V-type engine: This layout divides all cylinders into two groups, positioning adjacent cylinders at a certain angle to each other, forming two planes with an included angle. Viewed from the side, the cylinders appear in a V-shape. H-type engine: Commonly known as the horizontally opposed engine, this is also a variant of the V-type engine. By expanding the angle of the V-engine to 180°, adjacent cylinders are positioned opposite each other, creating a horizontally opposed configuration. These are typically 4-cylinder or 6-cylinder engines. W-type engine: This represents Volkswagen Group's proprietary engine technology. Essentially, it combines two V-type engines to form another V-type engine, following the principle "V + V = W = V".
13
2
Share

How Often Should Brake Fluid Be Replaced in a New Car?

It is recommended to replace the car's brake fluid every two years or 40,000 kilometers. Whether the brake fluid needs to be replaced mainly depends on the water content in the brake fluid. It is advised that car owners regularly use a brake fluid tester to measure the moisture content in the brake fluid to determine if replacement is necessary. Below is relevant information about brake fluid: The role of brake fluid: It effectively lubricates the moving parts of the braking system, extending the service life of brake calipers and rubber cups; it has anti-corrosion and anti-rust properties, causing no damage to the metal and non-metal materials of the braking system; it adapts to various environments, ensuring flexible transmission of braking force under conditions such as high temperatures, extreme cold, high speed, and humidity; it also serves to transmit energy and dissipate heat. Principles for replacement: If the braking feel becomes noticeably softer or if you feel the car isn't stopping effectively, it's time to check whether the brake fluid has oxidized or deteriorated. If such conditions exist, the brake fluid should be replaced promptly to avoid potential hazards.
7
2
Share

How many driver's licenses can be bound for point deduction in 12123?

The traffic management 12123 software allows binding two driver's licenses for point deduction, with a maximum of three driver's licenses allowed to be bound. However, during the binding process, only one driver's license can be for the owner's motor vehicle, while other driver's licenses must select non-owner motor vehicles when binding. After successful binding and approval, if other drivers incur point deductions or fines while driving the vehicle, the bound driver's licenses can be used for point deduction and fine processing. Below are the relevant details: Point Deduction Principle: The violator is responsible for handling the violation. The violating driver must bring the vehicle registration and driver's license to the vehicle management office for processing. Alternatively, point deductions can be handled through the traffic management 12123 software. Binding Principle: Each person is allowed to bind a maximum of three other people's motor vehicles at the same time; each motor vehicle is also allowed to have a maximum of three other people's driver's licenses bound to it. For driver's license holders, they can bind and unbind other motor vehicles, but the historical cumulative total cannot exceed five vehicles.
18
3
Share

How much engine oil should be added to a Mercedes-Benz S300 V6 engine?

Mercedes-Benz S300 V6 engine requires 8.5L of engine oil. Adding 8L only fills slightly more than one mark, not reaching the second mark out of a total of three marks. 8.5L is just right. Related to engine design: Generally, the larger the engine displacement, the more engine oil is required. For example, a 1.5L displacement engine typically requires 4L, a 2.0L requires 5L, and a 2.5L requires 6L. However, the exact amount of engine oil needed is not necessarily directly proportional to the engine displacement. It mainly depends on the engine design and the size of the oil pan. Impact on engine performance: The exact amount of engine oil to be added is not necessarily directly related to the displacement. The maintenance manual specifies the required amount of engine oil. Adding too much or too little engine oil can affect the engine's performance. General principles for choosing engine oil: Viscosity selection: This is the most important characteristic of engine oil. Simply put, it refers to the resistance of the fluid when flowing. Engine oils are categorized into summer high-temperature types, winter low-temperature types, and all-season types suitable for both winter and summer.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.