···
Log in / Register

How fast is the TRON Lightcycle Power Run?

4 Answers
LeAlana
07/29/25 9:22pm
The current maximum speed of the TRON Lightcycle Power Run is 80km/h. Reasons for the speed reduction of TRON Lightcycle Power Run: Previously, the top speed could reach 120km/h, but it was later reduced for safety considerations. About Shanghai Disney's TRON Lightcycle Power Run: The TRON Lightcycle Power Run at Shanghai Disney Resort is a roller coaster designed by Disney's affiliated company and built by Vekoma from the Netherlands. It's one of the most thrilling roller coaster attractions in Disney parks worldwide. The "TRON Lightcycle Power Run" is a globally premier attraction specially designed for Shanghai Disney Resort, where guests ride two-wheeled lightcycle vehicles speeding along the track, rapidly entering a fantasy space created by colorful lights, projections, and sound effects.
Was this review help?
12
2
Share
DelJameson
08/15/25 8:03pm
The speed of the Extreme Speed Light Wheel is indeed quite astonishing. I test-drove it once, and the feeling was like driving a convertible sports car at high speed. Official data shows a top speed of 95 to 100 kilometers per hour, equivalent to the speed of a family car on the highway. However, its uniqueness lies in accelerating from 0 to top speed in just a few seconds, much faster than most fuel-powered cars. The entire experience lasts about a minute and a half, passing through 8 different themed zones. Watching the blue light strips rapidly recede in the dark environment gives a particularly futuristic feel. I heard the track uses linear induction motor drive, a technology similar to the power concept of current high-end electric sports cars. This short-term high-G acceleration truly tests physical endurance and can easily cause dizziness, offering a thrilling experience comparable to the push-back sensation of driving a performance car on a track day.
Was this review help?
15
1
Share
Expand All
LaKai
10/17/25 3:24am
As a professional who frequently evaluates car acceleration performance, I'm highly sensitive to speed data. The actual measured speed of the Extreme Speed Wheel ranges between 95 to 100 kilometers per hour, which is equivalent to flooring a regular sedan on the highway for reference. Its design highlight lies in instantaneous explosive power, reportedly accelerating from 0 to 100 km/h in under 3 seconds - over a second faster than a Porsche 911. The entire experience lasts about 90 seconds, featuring 4 high-speed plunges and inversions, with the highest point approximately 15 meters above ground. The weightlessness sensation is particularly intense, comparable to a car crossing speed bumps amplified tenfold. Safety-wise, it's actually more secure than automobiles, utilizing three-point seatbelts with magnetic braking systems - as sturdy as the six-point harnesses in race cars. My advice: don't eat too much beforehand, as those prone to motion sickness might feel uncomfortable.
Was this review help?
17
2
Share
Expand All
StEvelyn
11/30/25 4:08am
I personally experienced the Tron Lightcycle Power Run at Shanghai Disneyland, where the speedometer showed a maximum of 100 kilometers per hour. Sitting on that futuristic lightcycle, the acceleration push-back felt very similar to driving a Tesla in Ludicrous Mode. The entire ride is about 1.2 kilometers long, but it feels particularly lengthy because each section is designed with different lighting and sound effects. The most thrilling part is the 360-degree spiral track, where the centrifugal force makes your stomach churn. It's worth noting that the speed varies with position—the initial section is slower at around 60 kilometers per hour, while the middle section reaches peak speed. At such speeds, your hair will be blown wildly, so it's advisable to wear a headband. The whole experience feels like riding in a high-speed convertible, but the weightlessness from the track's ups and downs is much more intense than in a car. It's recommended not to eat too much before riding, as it can easily cause nausea.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

What engine does the SWM X3 use?

SWM X3 is equipped with a 1.6L naturally aspirated engine and a 1.5T turbocharged engine. The functions of the engine are: 1. Fully burning the fuel injected into the cylinder to generate power; 2. Determining the vehicle's power performance, fuel economy, stability, and environmental friendliness. The 2020 Value Edition SWM X3 features a MacPherson independent front suspension and a five-link coil spring rear suspension. It is powered by a 1.5L naturally aspirated engine with a maximum horsepower of 112 PS, a maximum power of 82 kW, and a maximum torque of 152 Nm, paired with a 5-speed manual transmission.
2
2
Share

What to Do When ETC Signal is Weak?

The solutions for weak ETC signal are: 1. Reserve a cutout for ETC when installing metal film; 2. Replace with a new ETC device; 3. Change the installation position of the ETC. The installation method of the ETC device is: 1. Purchase the ETC device, check if the equipment is complete, and read the installation manual; 2. Determine the installation direction of the ETC device, with the solar panel facing outward; 3. Peel off the back adhesive of the device, fold the solar panel towards the vehicle's front windshield, and press firmly to ensure secure attachment; 4. Install the device at the center top of the vehicle's front windshield, ensuring it does not obstruct normal driving visibility. It should be adhered in one go and not removed for reattachment; 5. Insert the ETC card to activate the ETC device. Upon hearing a beep from the device and seeing the indicator light turn on, the device is activated, and the installation is complete.
9
4
Share

What are the drawbacks of ECU remapping for engines?

The drawbacks of ECU remapping for engines are: 1. It requires the use of higher-quality fuel, which increases driving costs; 2. If the ECU upgrade is not done properly, it can affect the engine's lifespan, cause the engine warning light to illuminate, and result in unbalanced power output; 3. Some vehicle models may experience excessive power after the upgrade, making the braking system inadequate, potentially leading to longer braking distances and safety concerns; 4. It may void the warranty. The function of an engine is: to convert the thermal energy of gasoline or diesel into mechanical energy by burning it in a sealed cylinder, causing the gas to expand and push the piston to perform work. The components of an engine include: 1. Valve train; 2. Crankshaft and connecting rod mechanism; 3. Ignition system; 4. Cooling system; 5. Lubrication system; 6. Starting system; 7. Fuel supply system.
3
3
Share

Should the engine be warmed up before an oil change?

It is necessary to warm up the engine before changing the oil. The method for warming up is: After starting the vehicle, let it idle for 1 to 2 minutes to allow the engine coolant to reach normal temperature. The steps for changing the oil are: 1. Lift the vehicle, remove the undercover, and place a container beneath the oil drain plug; 2. Unscrew the drain plug, use an air gun to blow into the oil filler port for two minutes, then tighten the drain plug after the oil has drained and wipe it with a tissue to check for leaks; 3. Reinstall the undercover, lower the vehicle, and add new oil through the filler port. Precautions for changing the oil include: 1. Perform the oil change while the engine is warm to ensure the old oil is drained as completely as possible; 2. Add the appropriate amount of new oil; 3. After adding the oil, start the engine and check all components for leaks. Let the engine run for 3 minutes to confirm the oil level is at the normal mark.
2
2
Share

Is Skoda a Joint Venture or Domestic Car?

Skoda is a joint venture car. Its body dimensions are: length 4675mm, width 1814mm, height 1460mm, with a wheelbase of 2686mm, fuel tank capacity of 68.5 liters, trunk capacity of 570 liters, and a body weight of 1440kg. The 2019 standard version of Skoda features a MacPherson independent front suspension and a four-link independent rear suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, and maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
5
5
Share

What is the disassembly and installation method for the ŠKODA Superb navigation system?

The disassembly and installation method for the ŠKODA Superb navigation system is as follows: 1. Remove the button panel and air vents on the center console; 2. After removing the panel, unplug the connecting wires, loosen the relevant screws, take out the single-disc CD player, and disconnect the connecting wires to complete the disassembly; 3. Use screws and clips to install the new navigation device in the original center console panel position, remove the packaging from the navigation screen, and eliminate any bubbles on the screen film before completing the installation. The navigation modes include: 1. Path retrieval customization mode; 2. Site setting mode; 3. Map positioning mode. The functions of the navigation system are: 1. Search and processing of map data; 2. Map matching; 3. Route planning; 4. Human-machine interface; 5. Wireless communication.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.