How fast can you drive in a 70 km/h average speed check zone?

2 Answers
LaGianna
08/29/25 8:46am
In a 70 km/h average speed check zone, the maximum speed you can drive is 77 km/h, but it's best to maintain a speed below 77 km/h throughout the entire zone. The penalties for speeding are as follows. 1. If you exceed the speed limit by less than 10%, there will be no penalty for the time being. 2. If you exceed the speed limit by more than 10% but less than 20%, you will be fined 200 yuan and receive 3 demerit points. 3. If you exceed the speed limit by more than 20% but less than 50%, you will be fined 200 yuan and receive 6 demerit points. 4. If you exceed the speed limit by 50% or more, you will be fined 2000 yuan, receive 12 demerit points, and may also have your driver's license revoked.
Was this review help?
14
5
Share
JohnLynn
09/11/25 6:13am
I've got a thorough understanding of the 70 km/h average speed check system after driving for so many years. The system installs cameras at the start and end points of the road section to record your entry and exit times, then calculates whether your average speed exceeds the limit based on the distance. If the speed limit is 70, your average speed must not exceed 70, otherwise, a fine will come knocking. You can accelerate slightly to 75 or 80 in some sections, but you must slow down elsewhere to balance it out—for example, driving faster at the start and slower at the end to keep the overall average under control. But honestly, this is quite risky. The police systems are very sophisticated now, and even a slight overspeed might get you caught. I believe safety comes first. Smooth driving not only avoids tickets but also protects your life and the lives of other road users. On highways with many slopes or curves where speed varies greatly, it's best to maintain a steady speed around 70, using the vehicle's speed alert function to help adjust.
Was this review help?
20
1
Share
Expand All
More Forum Discussions

What Causes the Jerking Sensation When Releasing the Accelerator Pedal in a Car?

If your car jerks when you release the accelerator pedal, it could indicate an issue with the transmission. First, check whether the transmission fluid is low or has deteriorated. Theoretically, except for CVT transmissions, all other types of transmissions may exhibit jerking sensations. CVT transmissions, also known as continuously variable transmissions, do not have the concept of gears, so there is no gear-shifting jerk. However, due to manufacturer tuning, even CVT transmissions may occasionally produce jerking sensations. For automatic transmission cars, a slight jerk during gear shifts while accelerating is normal, though the intensity varies by vehicle model. If the gear-shifting timing is not well controlled, the jerking sensation can become more pronounced.
7
1
Share

What are the features of the Toyota Levin 2021 Luxury Edition?

Toyota Levin 2021 Luxury Edition features long-press unlock button. Button functions: Long-press the unlock button, and all four windows will lower simultaneously; long-press the lock button, and all four windows will rise together. The vehicle is equipped with voice control functionality, allowing users to directly issue voice commands to operate the windows, sunroof, air conditioning, multi-function information display, and central control screen. Powertrain: The Levin is powered by a 1.2T turbocharged engine, paired with a CVT continuously variable transmission, delivering a maximum power of 85kW and a maximum torque of 185Nm. The drivetrain is front-engine, front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of E-type multi-link independent suspension.
20
2
Share

What needs to be replaced when the brakes don't work well?

When the brakes don't work well, the brake pads or brake discs need to be replaced. Here is some relevant information about brakes: 1. Definition: The braking system generates friction between the brake pads and the drum or disc, converting the kinetic energy of the moving vehicle into heat energy during the friction process. Common types of braking systems are "drum brakes" and "disc brakes". 2. Technique: When braking, release the brake before the vehicle comes to a complete stop. Continuously pressing the brake can cause a strong impact when the vehicle stops. The technique is to release the brake once before the vehicle fully stops, then gently apply the brake again until the vehicle comes to a complete halt.
2
1
Share

What brand is the vv7?

vv7 is a brand of Great Wall Motors, which is an SUV model, and its Chinese name is Wey vv7. The wraparound center console of the vv7 paired with circular air vent designs is very distinctive. Inside the car, you can choose from high-gloss black, tech-pattern, brushed, or wood-grain decorative panels, further meeting the demands of young consumers for personalization. The vv7 comes with a range of active and passive safety measures, including: engine start-stop, hill descent control, hill start assist, side safety airbags, electronic stability control, LED daytime running lights, rear parking sensors, traction control, anti-lock braking system, brake assist, active noise cancellation, lane keeping assist, wireless phone charging, fatigue reminder, streaming media interior rearview mirror, full LCD instrument panel, knee airbag, auto hold, child seat interface, brake force distribution, tire pressure monitoring, front parking sensors, and more.
7
1
Share

What colors are available for the new Jetta?

The new Jetta comes in the following colors: Candy White, Tornado Red, Titanium Gray, Reflex Silver, Cairo Gold, Samba Orange, Polar White, Magic Blue, Walnut Brown, Coral Blue, Sweet Gold, Maya Red, Deep Black, Alpine White, Atlas Gray, Crystal Silver, Slate Gray, Phantom Black, catering to the diverse preferences of consumers. The new Jetta measures 4487mm in length, 1706mm in width, and 1470mm in height, with a wheelbase of 2603mm. In terms of powertrain, the Jetta is equipped with two engines: a 1.4L naturally aspirated engine and a 1.5L naturally aspirated engine. The front suspension of the new Jetta uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
11
3
Share

Why Can't the Car Brakes Stop the Vehicle?

Car brakes may fail to stop the vehicle due to the following reasons: worn brake pads, air in the brake fluid, deteriorated brake fluid, leaking brake fluid lines, stuck or non-returning brake calipers, worn master cylinder seals or leaking connections, and malfunctioning ABS pump. If such a situation occurs, it is recommended to immediately inspect and address the issue at a repair shop. Methods to prevent excessive brake pad wear: 1. Reduce speed in advance when descending steep slopes, use appropriate gears, and employ engine braking in combination with the braking system to effectively reduce the burden on the braking system and avoid overheating. 2. Avoid turning off the engine while descending slopes. Most cars are equipped with brake vacuum boosters; once the engine is turned off, the brake booster not only fails to assist but also creates significant resistance for the master cylinder, greatly increasing the braking distance.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.