How fast can the Aochi X2 go?

3 Answers
DeGenevieve
07/24/25 3:00am
The maximum speed of the Aochi X2 is between 150 to 200 kilometers per hour. Speed regulations: The maximum legal driving speed for cars in China is 120 kilometers per hour, and this speed can only be achieved on highways. In general urban roads, the speed limit is usually 50 or 60 kilometers per hour. It is important to adhere to speed limits when driving on roads. Precautions: Driving habits should be gentle; avoid aggressive driving, sudden acceleration, hard braking, and sharp turns. Aggressive driving can cause the engine, brakes, throttle, steering, chassis, and other systems to react and move violently without proper break-in, potentially damaging components within these systems. These delicate parts are often difficult to repair effectively.
Was this review help?
14
4
Share
ClaytonFitz
08/10/25 10:00pm
I've been driving the Aochi X2 for many years. This vehicle is a mini electric truck designed primarily for cargo transport, not speed racing, with a standard top speed of around 90 km/h, which is quite practical. The reasons mainly lie in the vehicle's weight and structural design—the motor isn't particularly powerful, and given its commercial vehicle positioning, the manufacturer intentionally limits speed for safety and durability. When you're on the road with some cargo, you can easily reach this limit. It feels quite stable without any drifting, but the system will alert you if you exceed the speed. In actual driving, I find it very smooth for city deliveries, though it struggles a bit on highways. I'd advise not pushing it too hard to preserve battery life. Driving fast also increases wear and tear, leading to more frequent maintenance, which isn't cost-effective. Safety should always come first.
Was this review help?
20
5
Share
Expand All
MaximusLynn
09/24/25 4:44am
I test drove the Aochi X2 last week, and the top speed fluctuated between 80 to 90 km/h. It barely reached 90 when unloaded, but with cargo, it could only maintain around 85. Overall, the acceleration was smooth without any jerking, and it felt reliable like an old friend, perfectly suited for my delivery needs. It's far behind those small sedans—don't expect quick acceleration or overtaking. I also noticed the upside of not reaching high speeds is that it doesn't consume much electricity, making it fully adequate for daily city driving. If you often take long trips, you'll need to plan your route carefully, choosing flat roads and avoiding uphill sections. Additionally, the speed limit is mainly for risk prevention—commercial vehicles like this have tires and suspension designed more for durability, and speeding can easily lead to tire blowouts and accidents.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

What is the remote start tutorial for the Land Rover Range Rover?

First, you need to download the official app and register. After passing the manufacturer's verification, you can follow the function keys on the app to perform a remote start. Aim the key at the vehicle and press the lock button on the key. Within 5 seconds, hold the remote start button on the key for at least 4 seconds, or until the vehicle's turn signals flash. The parking lights will illuminate, and the doors will lock. After entering the vehicle during a remote start session, press the brake pedal and turn the ignition switch to the on position to drive the vehicle.
9
5
Share

How to Adjust the Dome Light Not Turning On When Opening the Door in a Land Rover?

If the interior light of a Land Rover Range Rover does not turn on when opening the door, it means the door control function has been turned off. You need to press the door control switch of the interior light to activate it. Open the driver's side door of the Land Rover Range Rover and step on the brake pedal. Press the one-touch start button of the Land Rover Range Rover to start the engine. The dashboard will light up, indicating that the engine has been started. There is a contact switch on the door. Press the door control switch of the Land Rover Range Rover to activate the interior light door control mode.
3
2
Share

How to Maintain a Land Rover Evoque?

Press the one-touch start ignition, use the function keys on the right side of the steering wheel, which are the 4 directional keys and 1 OK key, to find the vehicle information option on the dashboard. Locate the "Recent Alerts" option and press "OK" to enter. Simultaneously hold down the "Down" button on the right side of the steering wheel and the "i" button at the end of the turn signal lever, maintaining this action for about 10 seconds to complete the reset. Finally, restart the vehicle and check if the reset was successful. If not, repeat the operation.
7
3
Share

How to Engage Reverse Gear in a Kia Manual Transmission?

Locate the R gear on the Kia gear shift lever, which is designated for reverse. Engaging this gear allows the vehicle to move backward. Press down on the brake pedal of the Kia K2, leaving the accelerator pedal untouched for now. Press the Kia K2's one-touch start button to illuminate the dashboard and start the vehicle. Shift the Kia K2's automatic gear lever to the R position to enter reverse mode. Apply the brakes if there are obstacles, and gently press the accelerator if you need to increase speed. Once reversing is complete, depress the clutch, disengage the reverse gear, and release the clutch.
19
5
Share

How to Solve the Problem of Scooter Motor Spinning Freely?

When pressing the electric start button of the scooter, you can only hear the motor spinning freely without starting the vehicle. This may be caused by damage to the motor reduction gear. First, remove the transmission side cover. Check the reduction gear and find that the scooter motor cannot reset, confirming that the motor spinning freely is due to damage to the motor reduction gear. It is found that the reduction gear sleeve is severely worn and may no longer be usable. It is necessary to find the sleeve, reduction gear, and pressure cover according to specifications. Replace the sleeve, reduction gear, and pressure cover, then reassemble the vehicle. This will effectively solve the problem of the scooter motor spinning freely.
6
0
Share

What to Use to Clean Tar on a Car?

If there is rust, remove the rust first. Direct polishing can remove the rust. Choose a good anti-rust and waterproof coating to repair the rusted holes. When performing anti-rust work, it is best to use the same type of paint to prevent different paints from reacting with each other. After repairing the rusted holes on the chassis, apply a plastic sealant to the bottom of the car to prevent rust. To maintain the chassis in winter, perform a thorough chassis cleaning and anti-rust treatment. First, clean the chassis thoroughly.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.