How Fast Can a Kawasaki Go?

2 Answers
MilaLee
07/28/25 3:00pm
Taking the Kawasaki H2 as an example, the Kawasaki H2 can reach a top speed of 360 kilometers per hour. Introduction to the Kawasaki H2: The Kawasaki H2 is a high-performance motorcycle under the Kawasaki brand. This motorcycle is equipped with a 998cc inline-four, four-stroke, liquid-cooled engine. The maximum power output of this engine is 162kW, with a compression ratio of 8.5:1, a bore of 76 millimeters, and a stroke of 55 millimeters. Introduction to the Kawasaki H2's Power: The Kawasaki H2R is powered by a 1.0-liter inline-four supercharged engine. This motorcycle boasts 300 horsepower and can reach a top speed of 410 kilometers per hour. The supercharger technology significantly increases the engine's air intake, and with increased air intake, raising the fuel injection quantity can further enhance the engine's power.
Was this review help?
20
3
Share
JacksonDella
08/11/25 10:43pm
When it comes to Kawasaki's top speed, the Ninja H2 series leaves the deepest impression on me, especially the H2R model, which surpassed 400 km/h during track testing, thanks to its supercharged 998cc four-cylinder engine and aerodynamic design. As a motorcycle enthusiast, I've experienced similar models on the track—the explosive power when you open the throttle wide is truly breathtaking. But in reality, road speed limits are only 120 km/h, so I always remind my friends not to take risks. Lightweight construction and good tire grip are key factors, but don’t forget about the high wind resistance—proper protective gear is a must for high-speed riding. Regular maintenance, like oil changes and ensuring the braking system is responsive, is crucial to avoid losing control.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

What do the three attributes of ETS2 tires refer to?

ETS2 tire three attributes refer to the 3T marking, which are the treadwear index, traction index, and temperature index. 1. Introduction to 3T marking: These three index levels respectively indicate the degree of wear resistance, traction, and high-temperature resistance. The treadwear index reflects the tire's wear resistance; the higher the value, the more wear-resistant the tire is, and the harder the rubber, resulting in poorer comfort. Conversely, the lower the value, the less wear-resistant the tire is, the softer the rubber, and the better the comfort. 2. CCC mark: In addition to paying attention to the 3T marking, you should also pay attention to the CCC mark on the sidewall of passenger car tires. If this mark is absent, it means the tire has not obtained the national mandatory certification and is not suitable for domestic road conditions. Especially when purchasing imported passenger car tires, special attention should be paid to this mark; otherwise, it will seriously affect our normal use.
5
1
Share

Why can a 70-liter fuel tank hold 80 liters?

The reason a 70-liter fuel tank can hold 80 liters is due to the volatility and expansibility of gasoline. The functions of engine oil include the following 3 points: 1. Lubrication: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing bush. To prevent excessive wear of parts, an oil film needs to be established between the two sliding surfaces. A sufficiently thick oil film separates the surfaces of relatively sliding parts, thereby achieving the goal of reducing wear; 2. Auxiliary cooling: Engine oil has a relatively low specific heat capacity and is located inside the engine, so it does not inherently have a cooling effect. However, during engine operation, the heat generated by fuel combustion can be carried back to the oil tank by the engine oil and then dissipated into the air, assisting the radiator in cooling the engine. The actual cooling effect is provided by the water outside the engine casing; 3. Sealing and leak prevention: Engine oil can form a sealing ring between the piston rings and the piston, reducing gas leakage and preventing the entry of external contaminants.
11
4
Share

What is the difference between wading and water immersion?

Here are the differences between wading and water immersion: 1. In terms of hazard level: Wading can cause certain damage to the car's chassis as well as some car's headlights and precision components; Water-damaged cars can be repaired to some extent, but even after repair, there are serious hidden dangers. 2. In terms of definition: A wading car refers to a vehicle driving in low-lying, waterlogged areas, passing through water; A water-damaged car refers to a car that has been soaked in water, mostly referring to the wiring harness being soaked, with the water immersion depth exceeding 1/3 of the wheel, and the car's bottom components being in prolonged contact with water. Such cars have a very high risk coefficient.
17
0
Share

What's the Difference Between 95 and 98 Gasoline?

The differences between 98-octane and 95-octane gasoline: 1. Different octane ratings: 98-octane gasoline is a mixture of 98% isooctane and 2% n-heptane, while 95-octane gasoline consists of 95% isooctane and 3% n-heptane. 2. Different anti-knock combustion capabilities: 98-octane gasoline has higher anti-knock performance and power output, whereas 95-octane gasoline has average anti-knock combustion ability. Below is relevant information about gasoline: Composition of gasoline: It appears as a transparent, flammable liquid, refined from various petroleum-derived components such as straight-run gasoline, catalytic cracking gasoline, and catalytic reforming gasoline. After refinement, it is blended with high-octane components and primarily used as fuel for spark-ignition internal combustion engines in automobiles.
7
4
Share

Why does the Sail not accelerate when stepping on the gas pedal?

Possible reasons include CVT steel belt slippage, transmission oil pump failure, or internal transmission friction plate slippage. 1. CVT steel belt slippage: Slippage is one of the most common faults in automatic transmissions. Although automatic transmission slippage is often accompanied by severe wear or even burning of clutch or brake friction plates, simply replacing the worn friction plates without identifying the root cause of slippage will result in the transmission slipping again after a period of use. 2. Automatic transmission disassembly inspection: First check the main oil circuit pressure of the automatic transmission to determine the cause of slippage. If the automatic transmission slips in both forward and reverse gears, the cause is often low main oil circuit pressure. If the main oil circuit pressure is normal, only the worn or burned friction components need to be replaced. If the main oil circuit pressure is abnormal, during the transmission repair process, the oil pump or valve body should be inspected and repaired accordingly based on the main oil circuit pressure, and all transmission seals and gaskets should be replaced.
12
5
Share

How to Control the Power Windows in a Passat?

Long press the unlock button on the remote key to open the windows, and long press the lock button on the remote key to close the windows. More relevant information is as follows: 1. One-touch operation: The one-touch power window system allows the car windows to be fully opened or closed with a single press of the button. Cars equipped with one-touch power windows have a two-stage window control switch. The first stage works like a regular power window. The second stage automatically fully opens or closes the window when pressed and released. In contrast, regular power windows require holding the switch until the window reaches the desired position, then releasing to stop the movement. 2. Note: Generally, mid-to-high-end models are equipped with one-touch power windows for the convenience of drivers and passengers, mainly to prevent the driver from being distracted by operating the windows and to enhance safety. One-touch power windows usually come with an anti-pinch function to avoid the risk of pinching. Many anti-pinch systems use Hall sensors to detect the window's position. If an obstacle blocks the window during its ascent, the power window immediately stops and fully lowers to prevent pinching.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.