···
Log in / Register

How Far Should You Switch to Low Beam When Meeting Another Vehicle at Night?

1Answers
MacArianna
07/29/2025, 05:59:46 PM

When meeting another vehicle at night, you should switch to low beam when the oncoming vehicle is more than 150 meters away. On narrow roads, narrow bridges, or when meeting non-motorized vehicles, low beam should be used. Article 48 of the Road Traffic Safety Law states: On roads without central isolation facilities or center lines, when motor vehicles meet oncoming traffic, the following rules should be observed: 1. Slow down and keep to the right, maintaining a necessary safe distance from other vehicles and pedestrians. 2. On obstructed road sections, the vehicle on the unobstructed side has the right of way. 3. On narrow slopes, the vehicle going uphill has the right of way. 4. On narrow mountain roads, the vehicle not next to the mountain has the right of way.

Was this review help?
108
Share
More Q&A

Can Water Be Used as a Substitute for Automotive Windshield Washer Fluid?

Automotive windshield washer fluid cannot be replaced with water. The functions of automotive windshield washer fluid include the following four points: Cleaning Performance: Windshield cleaner is formulated with various surfactants and additives. Surfactants typically have functions such as wetting, penetrating, and solubilizing, thereby achieving the effect of cleaning and removing dirt; Antifreeze Performance: It can significantly lower the freezing point of the liquid, thus providing antifreeze protection and quickly dissolving frost; Anti-Fog Performance: A single-molecule protective layer forms on the glass surface, which prevents the formation of fog droplets, ensuring the windshield remains clear and transparent with a clear field of vision; Anti-Static Performance: After cleaning with windshield cleaner, substances adsorbed on the glass surface can eliminate static charges on the glass, providing anti-static properties.
102
Share

Is it better to service your car at a 4S shop or an external repair shop?

For maintenance and repairs, it is advisable to choose a 4S shop as it offers better after-sales service. For vehicles out of warranty, external maintenance and repairs can be considered due to lower costs. However, it is recommended to replace transmission fluid, differential oil, fuel filters, etc., at a 4S shop for better assurance. The pros and cons of 4S shops and repair shops are as follows: 4S Shop: 4S shops are more professional, and issues can be comprehensively addressed. However, there is a tendency to replace entire components even when only a small part is faulty. Repair Shop: Repair shops are more affordable and have rich experience in handling minor issues. They often specialize in certain car models, ensuring a certain level of professionalism and relatively official solutions. However, their skill levels vary, and they may lack expertise in repairing certain car models. Additionally, they often lack professional equipment, and after-sales service may not be well guaranteed.
101
Share

Does the Lingpai have daytime running lights?

The Lingpai is equipped with daytime running lights, which are located at the front of the vehicle and are specifically designed for daytime driving illumination. The functions of daytime running lights are: 1. To enhance road safety; 2. To reduce the occurrence of traffic accidents. Taking the 2020 Comfort Edition Lingpai as an example, its body dimensions are: length 4756mm, width 1804mm, height 1509mm, with a wheelbase of 2730mm and a fuel tank capacity of 40 liters. The 2020 Comfort Edition Lingpai is powered by a 1.5L naturally aspirated engine, delivering a maximum horsepower of 109PS, a maximum power of 80kW, and a maximum torque of 134Nm, paired with an electronic continuously variable transmission.
108
Share

What are the methods for checking electrical leakage in a car's circuit?

Methods for checking electrical leakage in a car's circuit are as follows: Visual Inspection: First, check the battery's inspection hole and the external appearance of the battery to see if there is any leakage. Multimeter Measurement: Use a multimeter to measure the battery voltage and charging status. The normal voltage should be above 12V, and it should not drop below 10V after continuous discharge for 10 seconds. Turn Off Devices: Turn off all electrical devices in the car, ensure the doors and trunk are locked, disconnect the negative terminal of the battery, wait for 20 minutes, then connect one end of a test light to the negative battery cable and the other end to the negative battery post. If the light illuminates, it indicates that electrical devices and circuits are still leaking electricity.
104
Share

What to Do When Your Car Gets Scratched While Parked on the Roadside?

First, call the police immediately and provide them with a clear account of the approximate time, location, and any individuals involved in the incident. At the same time, check if there are any surveillance cameras nearby. If you find one, note its number and inform the police. The police will then assist in locating the vehicle responsible for the damage. While waiting for the results, patience is required. Below are some related details: Situations for Suing the Other Party for Hit-and-Run: There are two scenarios to consider. The first is when the other party is unaware that they scratched your car. The second is when the other party knowingly caused the damage but deliberately fled. In the first scenario, you cannot sue the other party for hit-and-run, but in the second scenario, you can. Parking Precautions: When parking, it is advisable to choose a formal parking lot whenever possible. If no parking lot is available, try to park in an area with surveillance cameras. Additionally, avoid parking in narrow spaces whenever possible. The safest method is to park according to the marked lines.
108
Share

What Are the Reasons for Incomplete Brake Rebound in Cars?

The reasons for incomplete brake rebound in cars are: 1. The return spring is broken or has lost its elasticity; 2. The brake wheel cylinder is damaged; 3. The brake caliper piston is stuck, causing brake damping; 4. The rear axle bearing is fixed or installed incorrectly; 5. The rear wheel bearing is worn; 6. The front and rear brake pads are contaminated by lubricating oil or brake fluid; 7. The brake pads are worn out or deformed due to overheating; 8. The brake oil pipe or brake shoe is faulty. Solutions for incomplete brake rebound in cars: 1. Check if the return spring is damaged; 2. Clean or replace the brake pads; 3. Replace the rear wheel bearing; 4. Check the working condition of the brake oil pipe and brake shoe.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.