How Far Should You Switch to Low Beam When Meeting Another Car at Night?

1 Answers
Zoe
07/29/25 8:49am
Article 48 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China": On roads without central barriers or center lines, drivers should switch to low beam when meeting an oncoming vehicle at a distance of more than 150 meters at night. Low beam should also be used when meeting non-motorized vehicles on narrow roads or bridges. Relevant information about vehicle lights is as follows: 1. Introduction: Vehicle lights refer to the lamps on vehicles, which are tools for road illumination during night driving and also serve as signaling devices for various vehicle movements. 2. Reverse lights: Reverse lights automatically turn on when the driver shifts into reverse gear. They are white and transparent, mainly serving to alert vehicles behind that the car is reversing.
Was this review help?
17
4
Share
More Forum Discussions

What is the reason why the Audi A6 retractable screen does not automatically rise?

It may be a malfunction caused by a broken wiring harness. Appearance: The design features a different front grille and fog light assembly compared to the gasoline version. The LED daytime running lights have also been slightly adjusted to appear more technologically advanced, and it uses the densely-spoked wheels commonly found on new energy vehicles. Performance: It comes with one displacement option of 2.0T and one transmission choice of automatic manual. The engine has a maximum power of 155kW, a maximum horsepower of 211PS, and a maximum torque of 350Nm. The new car achieves a maximum pure electric range of 50km, a top speed of 135km/h, and a comprehensive range of up to 880km.
18
2
Share

What is the normal range for the timing chain tolerance of the Magotan?

The normal tolerance range for the Magotan timing chain is +3 to -3 degrees. With the continuous advancement of automobile manufacturing technology and industrial development, timing belts in some engines have been replaced by timing chains. Compared to traditional belt-driven systems, chain-driven systems offer more reliable transmission, better durability, and space-saving benefits. The entire system consists of components such as gears, chains, and tensioners. Precursors to timing chain failure in the Magotan include abnormal engine noises, weak startup, increased fuel consumption, increased oil consumption, severe exhaust emissions, sluggish acceleration response, the illumination of the yellow engine warning light, and insufficient power, among other issues. Timing chain inspection methods: Check the timing chain for elongation, wear, or breakage. If there is minor damage, it should be replaced immediately. Use a spring scale to measure the elongation at three or more points along the chain. If the elongation exceeds the permissible limit, the chain should be replaced promptly. The service life of a timing chain is approximately 160,000 kilometers. During this period, drivers should have the chain inspected at a professional repair shop. If the timing chain is severely worn or if there are other engine issues, timely repair or replacement is necessary.
5
5
Share

What are the main buttons of the Great Wall Fengjun 5?

Fengjun 5 button functions are as follows: Air conditioning off button (OFF): Press this button to turn off the air conditioning system, and the air conditioning settings interface will exit after a few seconds. Auto mode button (AUTO): Press this button, and the indicator light will turn on. Set the temperature to the desired level, and the air conditioning system will automatically adjust the airflow mode and volume to reach the set temperature. A/C button: Press this button, and the indicator light will turn on. After the compressor is activated, it can lower the temperature and humidity inside the car. Pressing this button when the air conditioning is off can turn on the air conditioning. Fengjun 5 model features: The interior color scheme has changed from gray to a black-gray dual-tone combination, with the center console panel and air vent trim painted silver. Additionally, the seats have undergone process improvements, and new seat fabrics have been selected to enhance comfort. In terms of power, it still comes equipped with a 2.0T diesel engine, 2.5T diesel engine, 2.8T diesel engine, and 2.2L and 2.4L gasoline engines, paired with a 5-speed manual transmission.
10
3
Share

Are Ford 6AT and GM 6AT the Same?

Ford 6AT and GM 6AT are the same because both are co-developed transmissions with identical product technologies. A transmission is a device that changes speed ratios and the direction of motion. It is used in automobiles, tractors, ships, machine tools, and various machines to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. A gear-driven transmission generally consists of a housing and multiple gear pairs. Transmission maintenance methods: Timely inspection of the transmission: Regularly check the fluid level in the transmission to ensure it remains within the specified range. Refill as needed based on actual working conditions, ensuring the new fluid is of the same type. When replacing the fluid, do so while the transmission is operating to promptly drain the old fluid and clean the system. Periodically inspect the working condition of the transmission gears to ensure optimal meshing between gears, and clean them regularly to maintain proper gear and shaft alignment. Timely inspection of different connection points in the transmission: During routine maintenance, inspect the condition of all connection points in the transmission to promptly identify issues such as looseness, wear, or damage. Tighten any loose connections immediately and repair or replace damaged parts as needed. Regularly check for oil leaks or seepage at the shaft-end oil seals and external joints, and replace failed seals or gaskets promptly.
17
2
Share

What is the impact of engine knocking in the ix35 on the vehicle?

Engine knocking, also known as detonation, can slightly increase engine power when it is mild. However, when severe, it can lead to a decrease in power and speed, unstable operation, severe engine shaking, and cause the engine to overheat and emit black smoke. Solutions for engine knocking: When the engine knocks, use a screwdriver to ground the spark plug and listen one by one to identify the cylinder producing the noise. Alternatively, inject a small amount of oil into the cylinder, install the spark plug, and start the engine. If the noise weakens or disappears and then reappears after a while, it can be determined as cylinder knocking. If the engine operates at normal temperature but the cylinder still exhibits significant knocking, the cause should be promptly identified and resolved. For diesel engines, fix the speed at the position where knocking is loudest and use the method of cutting off fuel to each cylinder for testing. Disconnect the high-pressure oil pipe of the cylinder. If the sound significantly weakens or disappears during the test, it indicates that the piston is knocking against the cylinder wall. At idle speed, the abnormal sound of the piston knocking against the cylinder is particularly clear. As the diesel engine's water temperature rises or the speed exceeds medium speed, the noise reduces or disappears. Remove the injector, inject a small amount of oil into the cylinder from its installation hole, and use the starter to rotate the diesel engine's crankshaft several times to fill the gap between the piston and cylinder wall with lubricating oil film, then start the diesel engine. If the sound significantly weakens or disappears immediately after starting, but quickly reappears as the oil film is lost or burned off, it indicates abnormal knocking in the cylinder. Remove the piston connecting rod assembly and use an outside micrometer and cylinder gauge to measure whether the fit clearance between the piston and cylinder, and between the piston pin and piston pin hole meets usage requirements. The mechanism of detonation is complex. Simply put, during normal combustion, the flame should start from the ignition center (spark plug) and spread to the entire combustion chamber at a speed of 30-70 m/s. Detonation occurs when, due to certain reasons (such as carbon deposits or low fuel grade), multiple points in the cylinder ignite simultaneously before the flame arrives, causing a sharp increase in local pressure and temperature. The pressure wave oscillates at high frequency in the cylinder, and the flame propagation speed can reach up to 1000 m/s during severe detonation.
18
1
Share

Are Hyundai engines durable?

Modern engines are very durable, with mature technology and stable performance. Hyundai has a well-established quality inspection system for automotive engine production, so there's no need to worry about durability. Definition of an engine: An automotive engine is the device that provides power to a vehicle, serving as the heart of the car. It determines the vehicle's power, fuel efficiency, stability, and environmental friendliness. Depending on the power source, automotive engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid engines, among others. Hyundai engines: Beijing Hyundai's engine blocks are made entirely of aluminum and feature a continuously variable intake and exhaust valve mechanism. Additionally, they incorporate dual CVVT technology, making the engine lightweight yet highly effective, with excellent power and performance. The Beijing Hyundai 1.6L γ engine delivers a maximum power of 90.4 kW at 6300 rpm and a maximum torque of 155 Nm at 4200 rpm. Compared to many traditional cast iron engines, the use of aluminum for the block material effectively reduces engine weight, leading to a lighter vehicle body and improved fuel economy.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.