How Far Can You Drive with a Tire Pressure of 196?

1 Answers
DeAliyah
07/29/25 2:55pm
Tire pressure of 196 should not be driven on. A tire with excessively low pressure increases its contact area with the ground, leading to abnormal temperature rises inside the tire during driving, which can affect vehicle handling. Tire Pressure Check Cycle: Generally, a car's tire pressure should be checked at least once a month. It's important to adjust the tire pressure with each season change, with the ideal adjustment times being November and May. In November, as winter approaches, tire pressure usually decreases and should be slightly adjusted. In May, as the weather starts to get hotter, it's advisable to check if the pressure is normal. Precautions for Checking Tire Pressure: Particular attention should be paid during May. As long as the tire pressure is not significantly higher than the standard range, there's no need to deliberately lower it. If the tires are not under-inflated, there's no need to adjust them every month.
Was this review help?
20
3
Share
More Forum Discussions

What are the common faults in a car's ignition system?

Common faults in a car's ignition system: 1. Spark plug failure: phenomena such as carbon deposits, oil contamination, and overheating on spark plugs; 2. Delayed ignition: heavy muffler noise, carburetor backfire during rapid acceleration, high engine coolant temperature, and weak vehicle performance; 3. Advanced ignition timing: unstable idle operation, prone to stalling, and severe engine knocking sound during acceleration. The car ignition system includes the power source (battery or generator), ignition coil, distributor, spark plugs, ignition switch, and control circuit. The car ignition system is designed for spark-ignition engines to operate normally by providing high-voltage electricity with sufficient energy to the spark plugs in the correct firing order for each cylinder, enabling the spark plugs to generate strong enough sparks to ignite the combustible air-fuel mixture.
4
3
Share

What does ESC/ABS fault mean?

ESC/ABS fault refers to malfunctions in the vehicle's Electronic Stability Control system and Anti-lock Braking System. Below are the relevant details: 1. Electronic Stability Control (ESC) system: It significantly enhances the vehicle's handling safety and driving convenience. When the vehicle encounters evasive maneuvers or sharp turns during driving, the system can quickly detect the situation and implement corresponding braking measures. It applies individual braking to each wheel, allowing independent control of every wheel while reducing engine power output to maintain vehicle stability. 2. Anti-lock Braking System (ABS): This is a vehicle safety control system with advantages such as anti-skid and anti-lock features. During operation, the ABS can achieve over 90% braking efficiency while also reducing brake wear and extending the service life of the braking system.
14
2
Share

How many points are deducted for not pressing the brake in Subject 3?

Subject 3 deducts 100 points for not pressing the brake, resulting in an immediate failure. In the Subject 3 exam, a score of 80 is required to pass. Before the exam, it is necessary to familiarize oneself with various deduction rules to avoid point deductions. The content of the road test for Subject 3 varies depending on the vehicle type, with nighttime test mileage required to be no less than 5 kilometers. Subject 3 generally includes: vehicle preparation, light simulation, starting and driving straight, gear operation, lane changing, etc. During the exam, no less than 20% of candidates will be selected for nighttime testing. Subject 3 is a practical road test, so it is important to practice extensively beforehand to ensure passing the exam.
8
3
Share

What is the Difference Between Buying a Car from a 4S Store and a Car Dealership?

Differences between buying a car from a 4S store and a car dealership: 1. Different brands: A 4S store is an authorized dealer of a specific brand and can only sell cars of that single brand authorized by the manufacturer; car dealerships lack manufacturer certification and are not limited to selling a particular brand, offering a wide range of models. 2. Different after-sales services: A 4S store integrates car sales, maintenance, parts, and information services; car dealerships require customers to use warranty certificates for maintenance and repairs at any 4S store of the corresponding brand. To meet the annual sales targets set by car manufacturers and earn rebates, 4S stores often wholesale some cars to car dealerships, commonly known as secondary dealers. These comprehensive car sales stores have lower operating costs and can profit through high sales volume at low margins, so their prices are generally cheaper than those of 4S stores.
2
3
Share

Introduction and Usage of Buttons in the Buick Excelle Interior

Introduction and usage of buttons in the Buick Excelle interior are as follows: 1. Electronic Stability Program (ESP): The system is enabled by default. It is not recommended to turn it off unless driving on slippery surfaces such as during rain or snow. 2. Auto Start-Stop: At traffic lights, the engine is temporarily shut off. When the driver's foot leaves the brake pedal, the vehicle will restart. 3. Recirculation/Fresh Air Mode: Recirculation mode heats or cools the air inside the car and recirculates it, while fresh air mode allows outside air to enter the vehicle. Use recirculation mode in heavy traffic, tunnels, or when the outside air quality is poor. On highways, it is advisable to periodically switch from recirculation to fresh air mode, with recirculation use not exceeding one hour at a time.
18
5
Share

Is Fuel Injector Cleaner Useful?

Fuel injector cleaner is useful and serves a practical purpose. However, due to the short duration it remains in the engine for cleaning during use, combined with the inherent limitations of no-disassembly cleaning methods, its cleaning effectiveness has certain constraints. Fuel injectors can be cleaned using cleaner, and the method for using fuel injector cleaner is as follows: 1. First, remove several fuel injectors and separate them individually. Connect two wires to the terminals of the fuel injector. 2. Take a bottle of cleaner and connect a tube to the fuel inlet of the injector. Then, connect the two wires to the battery—one to the positive terminal and the other to the negative. Remove the intake manifold. 3. Remove all sensors on the manifold, spray and soak them with engine degreaser, then clean with a high-pressure gun. After cleaning, use an air gun to blow them dry.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.