How Far Can You Drive with a Blown Head Gasket?

1 Answers
VanEthan
07/29/25 3:14pm
If the engine head gasket is blown, you should not continue driving and must replace the head gasket immediately. The reasons for a blown head gasket are as follows: 1. Overheating: Main symptoms include reduced acceleration power, misfiring sounds during acceleration, small amounts of water discharged from the exhaust pipe, white smoke emission, and oil-like liquid in the radiator (indicating a coolant passage leak) or water in the engine oil (indicating an oil passage leak). 2. Gas Leakage: High-pressure and high-temperature combustion gases may escape through the head gasket, leading to reduced engine power, stalling, inability to maintain high speeds or heavy loads, oil leakage (lubricant escaping from the head gasket), excessive oil consumption in the oil pan, and potential engine damage such as crankshaft burning. 3. Coolant Leakage: Coolant may leak from the head gasket, causing significant coolant loss, leading to engine dry burning, cylinder deformation, coolant entering the oil pan, excessive water consumption, oil emulsification, and subsequent crankshaft burning or cylinder deformation due to dry burning. 4. Gas Entering the Oil Pan: This can cause the breather to leak gas, leading to poor lubrication of engine components such as the camshaft and rocker arms, reduced engine power, gas entering the cooling system, radiator gas leakage, further power loss, and cylinder deformation.
Was this review help?
3
3
Share
More Forum Discussions

What to Do If the Car Headlight Adjustment Screw is Broken?

If the car headlight adjustment screw is broken, you can go to a car repair shop to replace the screw. If the screw base is damaged, since the base and the lamp body are integrated, you will have to replace the entire headlight assembly. When adjusting the headlights, avoid using a wall. Drive the car onto a flat road, adjust the low beam points to coincide at a distance of 30 meters, and align the high beam points parallel to the ground. Using a wall is only for aligning the two high beam points parallel. Methods for adjusting car headlights: 1. Park the car 7 to 6 meters away from a wall, ensuring the ground is level and the car is perpendicular to the wall; 2. Measure the height from the ground to the center of the headlight and the distance between the two headlights; 3. Place a horizontal masking tape on the wall 1 meter below the headlight height, ensuring the tape is centered directly in front of the car; 4. Adjust the vertical adjustment screw until the headlight beam is centered on the tape on the wall; 5. Continue adjusting the vertical screw until the beam is pointing straight ahead. To ensure accuracy, measure the height of the beam on the wall and compare it to the headlight height, making sure they are equal.
8
3
Share

How to Determine Compressor Damage?

Methods to determine compressor damage: 1. Check if the input power circuit has electricity; 2. Inspect compressor accessories, including thermal protection and relay. Damaged thermal protection will prevent the compressor from receiving power, while a faulty relay will cause the motor not to rotate and emit a humming sound when powered on. In such cases, the machine should be stopped immediately; 3. Examine whether all connector contacts are intact and if plugs are tightly fitted without looseness; 4. Check if the circuit voltage is normal; 5. Verify if the temperature relay contacts are connected by removing the relay box cover to inspect the contacts. A compressor is a driven fluid machine that converts low-pressure gas into high-pressure gas, serving as the heart of a refrigeration system. It draws in low-temperature, low-pressure refrigerant gas through the suction pipe, compresses it via piston movement driven by the motor, and then discharges high-temperature, high-pressure refrigerant gas through the discharge pipe, providing power for the refrigeration cycle.
8
4
Share

How many driving modes does the Mercedes-Benz E300 have?

Mercedes-Benz E300 has four switchable driving modes: Standard mode, Comfort mode, Economy mode, and Sport mode. The E stands for Economy mode. When this mode is selected, during high-speed driving, the engine may automatically coast when the accelerator is released, with no engine RPM, while the transmission actively shifts gears. S is Sport mode. In this mode, the transmission downshifts to increase engine RPM, providing clearer throttle response. Additionally, when switching to Sport mode during driving, the car's engine sound will change accordingly. Although speed increases in Sport mode, drivers may also feel engine hesitation, and fuel consumption will rise. The Mercedes-Benz E-Class is a mid-to-large-sized premium business sedan, coupe, and station wagon developed by Mercedes-Benz, positioned between the C-Class and S-Class.
13
5
Share

How often should the spark plugs be replaced for the Sagitar 1.4T?

Sagitar 1.4T spark plug replacement process: Conventional spark plugs should be replaced every 20,000 to 30,000 kilometers, while iridium spark plugs can generally be replaced every 60,000 to 80,000 kilometers. However, this mainly depends on the owner's driving habits and usual driving environment. The Sagitar is a spacious A+ class comfortable sedan that perfectly combines German craftsmanship with modern and dynamic styling. The Sagitar's design abandons the individuality and sportiness of the previous model, adopting a distinctive family-style design. The overall appearance is elegant and stable, with smooth body lines and refined detailing. The lower waistline on the side of the body features a concave design, integrating seamlessly with the front and rear wheel arches. The high waistline precisely outlines the body's curves, fully embodying the Sagitar's elegant and stable temperament.
5
2
Share

What is Automotive CRBS?

Automotive CRBS is a braking system. Here is extended information about CRBS: 1. Braking energy recovery method: Currently, there are two ways to achieve motor braking energy recovery in vehicles - one is called Parallel Regenerative Braking System (RBS), and the other is called Serial Regenerative Braking System (CRBS). 2. Impact on range: The CRBS system may consume more energy through motor reverse braking than it recovers during low-speed driving, which could negatively affect the vehicle's range. Most new energy vehicles are equipped with CRBS systems that can intelligently distribute the proportion of power recovery and mechanical braking when the driver applies the brakes.
17
5
Share

Why is the Honda XR-V reversing radar not beeping?

If the Honda XR-V reversing radar is not beeping, first check whether the power cord of the main unit is properly connected and whether there is current. Then, check whether the radar main unit wire is loose. If neither of these is the problem, the issue may lie with the radar itself. If the problem is confirmed to be with the reversing radar, the most likely cause is a damaged buzzer. In this case, you will need to purchase and install a new buzzer. Here is some additional information: 1. Reversing Radar: The full name is "Reverse Anti-Collision Radar," also known as a "Parking Assistance Device." It mainly consists of ultrasonic sensors, a controller, and a display (or buzzer). When the gear lever is shifted into reverse, the reversing radar automatically starts working. When the radar detects that an obstacle behind the vehicle is too close, the buzzer or display device of the reversing radar will issue a warning to remind the driver to pay attention to the distance behind. 2. System Malfunction: If the reversing radar does not beep or provide any relevant information while the vehicle is approaching an obstacle behind it, it indicates that the system may be malfunctioning.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.