How far can you drive when the fuel gauge yellow light is on?

2 Answers
HarleyMarie
07/24/25 1:59am
When the fuel gauge yellow light is on, you can generally drive for about 100 kilometers or more. Here are the reasons: When the fuel gauge yellow light is on, there is usually more than 12.5% of fuel left in the tank. For most car models on the market, this means there are about 8 liters of fuel remaining, which is sufficient to drive for over 100 kilometers without any issues. On highways, there is a gas station every 40 kilometers, so the remaining fuel when the yellow light is on is enough to reach the next gas station. Below is a brief introduction to the situation when the fuel gauge yellow light is on: The fuel gauge yellow light indicates the "safe remaining fuel level." When the fuel gauge light comes on, it is essential to pay attention and find the nearest gas station to refuel. This is not only to avoid the trouble of running out of fuel midway but also to prevent damage to the vehicle.
Was this review help?
14
4
Share
DiJonathan
08/10/25 9:33pm
When the fuel gauge yellow light comes on, the car can generally run about 40-50 kilometers, depending on your vehicle model and driving style. In my previous experience with a compact car, I tried a few times after the light came on—it could last up to 60 kilometers when driving at low speeds in the city without traffic jams, but on the highway with higher wind resistance, it could only manage about 40 kilometers before the fuel pump started buzzing. The manual states there’s roughly 2-3 liters of fuel left, equivalent to a range of 40-80 kilometers, but don’t rely entirely on it. If you encounter uphill roads or heavy loads, fuel consumption can spike. I recommend refueling as soon as the light comes on. Running on an empty tank can overheat the fuel pump, costing hundreds to repair, not to mention the risk of stalling and accidents on the road. Parking with very little fuel left also affects engine cooling, and long-term neglect can damage components, leading to costly repairs. Develop a habit of checking the fuel gauge before driving—don’t wait until the yellow light appears to panic.
Was this review help?
11
4
Share
Expand All
More Forum Discussions

Which button is used to exit the mute mode in the Buick GL8?

The button to exit the mute mode in the Buick GL8 is the hang-up button on the steering wheel. Below are the specific details about the Buick GL8: Positioning and Model: The Buick GL8 is a mid-to-high-end MPV launched by SAIC-GM Buick. Power System: It is equipped with a 2.0T SIDI direct-injection turbocharged engine, which has a maximum power output of 191 kW and a maximum torque of 350 Nm. In terms of the transmission system, the engine is paired with a 6-speed automatic manual transmission. During operation, the engine can deliver its maximum power at 5400 rpm and its maximum torque between 2000-5000 rpm.
1
4
Share

What is the gear usage instruction for the Prado?

The gear instructions for the Prado are as follows: Gear lever: The gear lever is located in the middle of the cabin. The topmost gear is the P (Park) gear, which is used for parking. The R (Reverse) gear is for reversing; engage this gear when reversing. Engaging the N (Neutral) gear puts the vehicle in neutral, which can be used for short stops. Important notes: The vehicle can only be started in P or N gear. To shift out of P gear, the brake must be pressed. Generally, when shifting between N, D, and 3 gears, there is no need to press the shift button. However, when shifting from 3 to lower restricted gears, the shift button must be pressed. Shifting from lower to higher gears does not require pressing the shift button. Never shift into N gear while driving to coast.
6
2
Share

How does the tire pressure monitoring system work in Volkswagen vehicles?

Volkswagen's tire pressure monitoring principle utilizes data transmitted by the ABS system sensors to monitor the rotational speed of each wheel and changes in their rolling circumference. Below are the relevant details: 1. If the rolling circumference of any wheel changes, the warning light will illuminate. Tire pressure monitoring involves real-time automatic monitoring of tire pressure during vehicle operation, alerting drivers to tire leaks or low pressure to ensure driving safety. 2. When tire pressure is too high, it reduces the contact area between the tire and the ground, while the pressure borne by the tire increases relatively, affecting the tire's grip. 3. Additionally, when the vehicle passes over potholes or bumpy roads, insufficient space inside the tire to absorb vibrations not only impacts driving stability and ride comfort but also increases the impact on the suspension system, posing further risks. Moreover, the potential for tire blowouts in high temperatures also increases accordingly.
3
5
Share

Is it okay for the engine compartment to be hot in summer?

In summer, the temperature in the engine compartment can reach at least 60-70 degrees Celsius, which is within the normal range. The circuits in the engine compartment mainly consist of capacitors, resistors, and transistors. Below is an introduction to the temperature tolerance of these components: 1. Capacitors: The most heat-sensitive are electrolytic capacitors, with a tolerance temperature not exceeding 105 degrees Celsius. 2. Resistors: Metal oxide film resistors, depending on their power rating, can withstand temperatures between 125-235 degrees Celsius. 3. Transistors: The high-temperature limit for silicon PN junctions is generally 175 degrees Celsius; the lower the temperature, the significantly increased lifespan and reliability.
18
3
Share

Where to Check Hino Engine Model?

Open the engine hood to locate the vehicle nameplate, which clearly indicates the engine model. Here is additional information: 1. Technical Capabilities: The diesel engines produced by Shanghai Hino employ high-pressure common rail fuel injection technology, meeting Euro III emission standards. With exhaust after-treatment technology, they can comply with Euro IV emission regulations. 2. Application Scope: Shanghai Hino products are primarily used in heavy-duty trucks, large buses, and concrete mixer trucks, with a power range of 280 to 380 horsepower. The product overhaul period exceeds 1 million kilometers. 3. Partner Companies: They have successfully partnered with renowned enterprises such as Sinotruk, North Benz, JAC Motors, Kobe Steel, Sany Heavy Industry, Shanghai Huajian, Shanghai Huizhong, Xiamen King Long, Zhengzhou Yutong, and Anhui Hualing.
3
2
Share

How to Maintain the Roewe i5?

Roewe i5 is maintained at local 4S stores. Below is an introduction to the Roewe i5: Introduction: The Roewe i5 is a high-performance internet-connected mid-size sedan under the Roewe brand. Development History: On June 26, 2019, the Roewe i5 Linghao version was launched. On September 26, 2019, the upgraded Roewe i5 Linghao series was released. In March 2021, SAIC Roewe first revealed the exterior and official interior images of the fourth-generation premium family sedan, the all-new Roewe i5. On April 7, 2021, SAIC Roewe officially announced the pre-sale price of its new compact sedan—the new i5, which comes in 4 configuration variants.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.