How far can the XPeng P7 with a 586km range actually travel?

1 Answers
Imogen
07/23/25 8:28pm
According to official data, the XPeng P7 has a range of 706km, but actual range varies between 480km and 600km depending on weather and road conditions. The XPeng P7 is a mid-size sedan under the XPeng brand, with a wheelbase of 2998mm, and dimensions of 4880mm in length, 1896mm in width, and 1450mm in height. The XPeng P7 is available in both rear-wheel drive and all-wheel drive versions. The rear-wheel drive version is a single-motor model, while the all-wheel drive version is a dual-motor model. The rear-wheel drive version's motor has a maximum power of 196kW and a maximum torque of 390Nm. The all-wheel drive version's motors have a combined power of 316kW and a combined torque of 655Nm. The XPeng P7 uses two types of batteries: lithium iron phosphate (LFP) batteries and ternary lithium batteries. The cathode of the LFP battery is made of lithium iron phosphate, while the cathode of the ternary lithium battery is made of ternary materials. Ternary lithium batteries have higher energy density and are lighter in weight. The cathode of ternary lithium batteries is made of nickel, cobalt, and manganese, while some ternary lithium batteries use nickel, cobalt, and aluminum for the cathode. In terms of chassis design, the front suspension of this car uses a double-wishbone independent suspension, and the rear suspension uses a multi-link independent suspension. The double-wishbone suspension consists of upper and lower wishbones with a connecting rod in between. This type of suspension can reduce body roll and minimize brake dive. The multi-link suspension is an improved version based on the double-wishbone suspension, where the two wishbones are replaced by separate links.
Was this review help?
17
2
Share
More Forum Discussions

What is the problem when the engine malfunction indicator light flashes?

The reason why the engine malfunction indicator light flashes is that a certain component of the engine has failed, which is an abnormal phenomenon. The possible scenarios after the engine malfunction indicator light flashes include: 1. The light is on but there are no abnormalities in driving. This is usually due to a sensor malfunction, and you can continue driving temporarily, but it is recommended to drive at low to medium speeds; 2. The engine malfunction light is on, the vehicle can still be driven, but severe shaking, lack of power during acceleration, and other symptoms require rescue; 3. The car cannot start, which is caused by a fuel pump or ignition component failure, and you can only call for help. An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, electric motors, etc.
1
4
Share

How much does the Haval Big Dog weigh?

Haval Big Dog's total vehicle weight is 2 tons. Haval Big Dog: The Haval Big Dog is positioned as a compact SUV, with dimensions of 4620mm in length, 1910mm in width, and 1780mm in height, and a wheelbase of 2738mm. In terms of fuel consumption, the Haval Big Dog's declared fuel consumption per 100 kilometers is 6.9L, indicating excellent fuel economy. The official names for the six colors of the Haval Big Dog are: Orange Dog, Red Dog, White Dog, Black Dog, Gray Dog, and Green Dog. Design: The Haval Big Dog's rugged body styling and rich body colors, combined with the retro elements of circular headlights and the fashionable trend of LED integrated high and low beam design, give it a high rate of turning heads, while also meeting the growing needs of the emerging generation of consumers in recent years.
8
4
Share

How Often Should Shock Absorbers Be Replaced?

Shock absorbers should be replaced every 80,000 to 100,000 kilometers. Over time, the vehicle's vibration filtering performance will deteriorate significantly, potentially affecting handling aspects such as braking and cornering. If the daily driving route has poor road conditions, this will accelerate the wear of the shock absorbers, and owners should replace them in advance to avoid driving safety issues. The impact of damaged shock absorbers on the vehicle: 1. If one shock absorber is leaking oil, it will cause the vehicle body to become unbalanced, with one side higher than the other, leading to automatic deviation while driving and exacerbating irregular tire wear; 2. If the shock absorber top rubber ages and falls off, it will cause the shock absorber to collide with other components, resulting in abnormal noises. Most abnormal noises from the chassis are due to this reason; 3. If the shock absorber spring becomes weak and lacks sufficient extension force, the shock absorption and cushioning effects will be greatly reduced, increasing the hydraulic pressure on the shock absorber and leading to oil leakage.
1
4
Share

Is It Normal for the Front Lighting Indicator to Stay On?

It is normal for the front lighting indicator to stay on. The indicator light is connected in parallel across the switch. When the switch is turned on, the lighting is illuminated, and there is no voltage across the switch, so the indicator light turns off. When the switch is turned off, the lighting goes out, and at this time, there is voltage across the switch. One end of the switch is connected to the live wire, while the other end is connected to the neutral wire through the filament of the bulb. Therefore, when the switch is off, there is voltage across it, which is sufficient to make the indicator emit a faint glow. The headlight is an electrical device that converts electrical energy into light energy and projects it onto the road. It consists of a light-emitting bulb, a reflector that focuses and directs the light onto the road, and a lens that produces a reasonable light distribution. Vehicles are equipped with either 2 or 4 headlights at the front, along with 2 additional fog lights for road illumination during rain, snow, or fog.
15
2
Share

Can an automatic transmission car be started in neutral?

An automatic transmission car can be started in neutral. As long as the gear is not left in R (Reverse), it will not harm the transmission. In fact, the P (Park) gear is almost the same as the N (Neutral) gear. If you push further to P gear, the TCU (Transmission Control Unit) will not issue a shift command, which is equivalent to neutral. Therefore, an automatic transmission car can be started when in neutral. Automatic transmission generally refers to the automatic gear-shifting mechanism in cars, where the control system of the automatic transmission selects the appropriate gear based on the engine speed and load during driving, replacing the driver's subjective judgment and gear-shifting operations. A typical automatic transmission car has six gear positions, from top to bottom: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low).
4
0
Share

What is the difference between car primer and topcoat?

The differences between car primer and topcoat are: 1. Different composition: Primer consists of four parts: resin, filler, solvent, and additives; topcoat is composed of three parts: clear coat, color coat, and primer. 2. Different functions: Primer is the first layer of the paint system, used to level the paint surface, support the topcoat, provide fullness, and reduce costs; topcoat is the final coating layer, which increases the thickness of the paint film by adding layers of topcoat or applying thick coats. 3. Different roles: Topcoat has scratch resistance, gloss hardness, transparency feel, aging resistance, and yellowing resistance; primer fills the capillary pores in the steel plate, making it easier to apply paint on the surface, supports the topcoat to ensure it adheres tightly to the car surface, and helps reduce costs and save energy.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.