How Far Can the Camry Hybrid Run on Pure Electric Power?

1 Answers
TannerAnn
07/29/25 9:28pm
This vehicle has a pure electric driving range of approximately 10 kilometers. Below are the relevant details: Powertrain Specifications: The hybrid version of the Camry is equipped with a 2.5-liter naturally aspirated engine and a 120-horsepower electric motor. The 2.5-liter naturally aspirated engine delivers a maximum power output of 131 kW, with a peak torque of 221 Nm. The engine reaches its maximum power at 5,700 rpm, and its peak torque is achieved between 3,600 and 5,200 rpm. Pure Gasoline Versions: The Camry also offers two pure gasoline variants. These models are powered by two different engines: a 2.0-liter naturally aspirated engine and a 2.5-liter naturally aspirated engine. The 2.0-liter engine produces a maximum power of 131 kW and a peak torque of 210 Nm, with maximum power achieved at 6,600 rpm and peak torque available between 4,400 and 5,200 rpm.
Was this review help?
14
1
Share
More Forum Discussions

Can the Coolant Be Filled to the Top?

Coolant should not be filled to the top, as the excess coolant will overflow from the pressure relief valve due to thermal expansion and contraction. The coolant level should be maintained between the upper (MAX) and lower (MIN) marks. Coolant Replacement Method: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leaks or cracks in the pipes, with a particular focus on the five-way hose. The five-way hose is named for its five connections to different parts of the vehicle. The coolant flows through the five-way hose and is then distributed to various parts of the car to perform its function. If there is any leakage of coolant in this section, replace the hose or resecure the connections as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir and continue filling until the water flows continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir will have a faint pink tint. Continue adding clean water until the outflowing water is clear. Note: Remember to disconnect the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose to allow it to flow quickly into the radiator. Then, add another container of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is purged from the cooling system. Top up the coolant to the "MAX" mark on the reservoir.
9
4
Share

What is the difference between Audi RS and A?

Different engines, different exterior dimensions, and different maximum torque. The following is an introduction about Audi: 1. Introduction: A luxury car brand, its logo consists of four interlocking rings. Currently a subsidiary of Volkswagen Group in Germany. On December 20, 2018, Audi ranked 51st in the 2018 World's 500 Most Influential Brands list. 2. History: The history of Audi AG in manufacturing cars and motorcycles can be traced back to the 19th century. Originally, four car companies in Saxony—Audi and Horch in Zwickau, Wanderer in Chemnitz-Siegmar, and DKW in Zschopau—made outstanding contributions to the advancement of the German automotive industry at that time.
8
1
Share

How many reverse lights are there on the Oshan X5?

The Oshan X5 has 1 reverse light. Below is relevant information about car reverse lights: 1. Introduction: Car reverse lights are installed at the rear of the vehicle to illuminate the road behind when reversing and serve to alert vehicles and pedestrians behind. 2. Classification: Car reverse lights can be categorized by material into gas reverse lights and LED reverse lights. Gas reverse lights, which use halogen materials, are mature in technology and low in cost, making them widely used in many vehicle models. LED reverse lights, made with LED materials, feature pollution-free, radiation-free operation and a long service life, with a theoretical lifespan exceeding 50,000 hours.
16
3
Share

Is It Safe If No Message Is Received After 10 Days of Running a Red Light?

Not receiving a message within 10 days doesn't necessarily mean it's safe. After running a red light, you typically receive a notification within 3 to 7 days, with the latest being around 13 days. However, some cities now offer "Instant Notification for Electronic Police Capture," where you receive an SMS notification within 5-10 minutes of being captured. But this notification does not equate to a traffic violation; it merely serves as a capture alert. The final determination of whether it constitutes a violation takes 3-7 days. If it is indeed a violation, you will receive another SMS notification. For traffic violations captured by surveillance cameras, vehicle owners usually do not receive an immediate violation SMS; there is a delay, and the duration varies. After the electronic camera captures the violation, the relevant information needs to be transmitted through a dedicated channel to the traffic police management center, where it is compiled and then verified by relevant staff. Once confirmed as a violation, the system automatically retrieves the vehicle owner's phone number based on the license plate information and sends the violation details via SMS. Only then does the owner receive the corresponding violation message. After receiving the violation SMS, the vehicle owner must settle all previous violations within one month before the annual vehicle inspection. Generally, if you suspect a violation, you can use 15 days as a benchmark. If no violation SMS is received beyond 15 days, it is likely that no violation was recorded. Traffic Violation Query Methods: Traffic violation queries refer to checking motor vehicle violations of traffic management through online or terminal methods. Methods include website queries, phone queries, SMS queries, mobile app queries, and offline terminal queries. Website Query: Search for "vehicle violation query" and enter vehicle information to check. Phone Query: Dial local 114 (area code + 114) or 12580 to confirm traffic violations. Violations can only be processed at the location of the violation or the vehicle's license plate issuance location. For on-site violations, such as those directly caught by traffic police, processing must occur at the violation location. SMS Query: Open the SMS interface on your phone, enter "WZ" followed by the license plate number and color, and send it to 1062650001. Mobile App Query: Open the Traffic Management 12123 app, select "Violation Query," and address any unresolved violations. Offline Terminal Query: Visit the local traffic management hall and use the self-service terminal to enter the license plate number and check recent violation records.
6
4
Share

What are the deduction criteria for simulated lighting?

Below are the deduction criteria for simulated lighting: 1. Failure to turn on headlights: immediate deduction of 100 points. 2. Driving at night on roads without streetlights or with poor lighting conditions: failure to turn on lights results in a 100-point deduction; using low beams results in a 5-point deduction. 3. Driving closely behind another vehicle in the same direction at night: using high beams results in a 100-point deduction. 4. Experiencing a vehicle breakdown or traffic accident at night that obstructs traffic and is difficult to move: failure to use hazard lights or position lights results in a 100-point deduction. 5. Driving in foggy conditions: failure to use fog lights results in a 100-point deduction; failure to turn on hazard lights results in a 100-point deduction; using high beams results in a 100-point deduction.
11
2
Share

Why Can't the Rear Window Glass Open?

If the car window glass cannot open, it may be due to the following three common situations: 1. Glass vibration with abnormal noise. This indicates that the window regulator screws may be loose. 2. The window regulator is stuck. 3. All window regulators fail to work, losing the lifting function. Below is an introduction to car glass maintenance: 1. Proper use of windshield washer fluid: There are many types of windshield washer fluids available in the domestic market, mainly divided into three categories: summer windshield washer fluid, winter antifreeze windshield washer fluid, and special antifreeze windshield washer fluid. Summer windshield washer fluid is mainly used to remove insect residues from the mirror surface; winter antifreeze windshield washer fluid ensures that car components are not damaged when the temperature drops below -20°C; special antifreeze windshield washer fluid is mainly used in extremely cold northern regions, ensuring the car does not freeze even at -40°C. 2. Purchase glass insurance for your car: Glass breakage insurance is a commercial insurance where the insurance company compensates for the loss of the insured vehicle's glass breaking during use. Glass breakage refers to situations where only the windshield and window glass of the insured vehicle are damaged. 3. Apply window film to your car: In the scorching summer, heat-insulating film plays a significant role, not only blocking the blazing sun but also providing heat insulation and UV protection. Industry experts point out that heat insulation is one of the main reasons consumers choose window film. Additionally, the film's light transmittance and UV protection index are also important factors consumers should consider. However, many consumers have misconceptions when selecting heat-insulating films.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.