···
Log in / Register

How far can the Baojun 310 go after the fuel gauge lights up?

4 Answers
LondonAnn
07/29/25 10:30pm
When the fuel gauge of the Baojun 310 lights up, it can still run for about 50 kilometers. The fuel gauge is used to indicate the amount of fuel remaining in the car's fuel tank, which can be either a pointer or a digital display. The low fuel level warning device alerts the driver when the fuel in the tank falls below a certain specified level, drawing their attention. The Baojun 310 is a compact car launched by SAIC-GM-Wuling, with dimensions of 4032mm in length, 1680mm in width, and 1450mm in height, and a wheelbase of 2550mm. It is equipped with a 1.2L naturally aspirated engine, delivering a maximum power of 59kw, and paired with a 5-speed manual transmission.
Was this review help?
12
2
Share
DelOscar
08/15/25 11:23pm
As an average car owner, I've driven the Baojun 310 quite a few times, and whenever the fuel light comes on, I immediately look for a gas station. Generally speaking, you can still drive about 50 to 80 kilometers after the light comes on, but it depends on the situation. For example, when driving in the city with frequent stops and starts, fuel consumption is faster, and you might only make it around 50 kilometers. On the highway, driving steadily might allow you to go a bit farther. But never gamble on this distance—if you run out of fuel in a remote area, breaking down can be a real hassle, and calling a tow truck could cost you even more. I always remind myself that running too low on fuel can also damage the fuel pump, and repairs aren’t worth the expense. So the best strategy is to refuel as soon as the light comes on—don’t wait. Safety first, and it saves you a lot of worry.
Was this review help?
5
2
Share
Expand All
Velazquez
10/18/25 3:20am
With over a decade of driving experience, I've gained some insights about fuel warning lights. For economical cars like the Baojun 310, the remaining range after the warning light comes on is typically between 60 to 70 kilometers, but there are numerous influencing factors. Driving habits play a crucial role—I've tried turning off the AC and gently pressing the accelerator to extend the distance slightly. Maintaining a constant speed on highways results in lower fuel consumption, while urban traffic congestion drains fuel rapidly. I recommend not relying on specific numbers, as there are significant variations between vehicles, and fuel quality also has an impact. More seriously, prolonged driving with low fuel levels can damage the car, potentially burning out the fuel pump. I've found the safest approach is to refuel within 10 kilometers after the warning light appears, and developing a habit of frequently checking the fuel gauge can help reduce such situations.
Was this review help?
16
4
Share
Expand All
StAmy
12/01/25 3:58am
I prioritize family car safety and never take the fuel gauge warning lightly. When driving my Baojun 310 with family onboard, I estimate only about 50 kilometers after the warning light comes on before immediately looking for a gas station. Running out of fuel on the road poses significant dangers, such as potential accidents on highways or frightening children. This distance isn't certain—factors like temperature extremes or AC usage can shorten it. To prevent emergencies, I always maintain at least half a tank and refuel proactively on weekends. Safety comes first—never risk it to save a bit on fuel, especially with family in the car.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

What is the reason why the rearview mirror of the Audi A6 does not automatically fold?

The reason why the rearview mirror of the Audi A6 does not automatically fold is: a short circuit in the rearview mirror wiring. The solution is to turn off the car and restart it, then press the automatic folding button for the rearview mirror on the car door handle, and the car's rearview mirror will automatically fold. If it cannot be restored, it needs to be inspected and repaired at a 4S shop. Taking the Audi A6 (imported) 2021 Avant Pioneer 40TFSI Luxury Dynamic model as an example: it is a mid-to-large-sized car launched by Audi (imported), with a length, width, and height of 4951mm, 1886mm, and 1483mm respectively, and a wheelbase of 2925mm. It is equipped with a 2.0T turbocharged engine and a 7-speed dual-clutch transmission.
18
5
Share

What is the optimal oil level on the dipstick for a motorcycle?

The optimal oil level on the dipstick for a motorcycle: approximately three-quarters between the upper and lower marks on the dipstick, meaning slightly towards the upper limit within the dipstick's range. Steps to check the oil level: 1. Place the vehicle on a flat surface, turn off the engine, and let it sit for 15 minutes; 2. Remove the dipstick, wipe it clean, and reinsert it, ensuring it reaches the bottom of the oil pan; 3. Remove the dipstick again to check the oil level. If the oil level is within the upper and lower marks on the dipstick, it is normal. A motorcycle is a two or three-wheeled vehicle powered by a gasoline engine and steered by handlebars controlling the front wheel. It is lightweight, flexible, fast, and widely used for patrolling, passenger and cargo transport, as well as a sports equipment.
7
1
Share

What Does the Low Fuel Level Warning Light Indicate?

When the low fuel level warning light illuminates, it indicates that the fuel is nearly depleted. Generally, from the moment the light comes on until the fuel is completely exhausted, the vehicle can typically travel at least 20 kilometers without any issues, and some vehicles may even cover around 50 kilometers. Alternatively, the issue might be with the fuel level sensor (fuel float), which should be inspected. Below is an introduction to gasoline octane ratings and their corresponding engine compression ratios: 1. 90-octane gasoline: Suitable for gasoline-powered vehicles with an engine compression ratio below 8.5. 2. 92-octane gasoline: Suitable for gasoline-powered vehicles with an engine compression ratio between 8.6 and 9.9. 3. 95-octane gasoline: Suitable for gasoline-powered vehicles with an engine compression ratio between 10.0 and 11.5. 4. 98-octane gasoline: Suitable for gasoline-powered vehicles with an engine compression ratio above 11.6.
9
3
Share

How to reset the maintenance light on the Leiling 1.2T?

Method to reset the maintenance light on the Leiling 1.2T: 1. Turn the ignition switch to the ON position; 2. Press and hold the maintenance light reset button, then rotate until the trip meter A appears; 3. Turn off the ignition switch; 4. Press and hold the maintenance light reset button while rotating, then turn the ignition switch to the ON position again; 5. Turn off the ignition switch, press and hold the maintenance light reset button and rotate until the mileage is reset. After 5 seconds, trip meter A will display "000000", indicating the maintenance light has been successfully reset. Taking the 2021 CVT Luxury Edition Leiling as an example: The manufacturer of this vehicle is GAC Toyota, with a body length, width, and height of 4640mm, 1780mm, and 1455mm respectively, a wheelbase of 2700mm, equipped with a 1.2T turbocharged engine, and matched with a CVT continuously variable transmission.
8
1
Share

What are the dimensions of the Mistra?

Modern Mistra model dimensions are 4710*1820*1470mm. Related introduction: 1. Introduction: Mistra is a Beijing Hyundai new mid-to-high-end sedan, MISTRA Mistra is positioned at the B level, between the Elantra and the Sonata, is another fine work that Beijing Hyundai aims at the gap in the segmented market and launches in the B-level mid-to-high-end sedan market, and is also another model specifically developed for the Chinese market. 2. Appearance: In terms of appearance, the Mistra continues to further deepen the fluidic sculpture design language, especially adopting a wide grille horizontal bar design similar to the Santa Fe, and will be equipped with lenses, with frosted silver and chrome line decorations inside the lights.
2
4
Share

Will the suspension be damaged if the rear wheel falls into a pit?

If the rear wheel falls into a pit, the suspension will not be damaged. The reasons are as follows: 1. Structural reasons: In modern cars, it is often only used for the rear wheels. In this type of suspension, the wheels are controlled by an independent linkage mechanism, allowing them to move individually according to road conditions without affecting the entire vehicle body. 2. Suspension introduction: Suspensions can be divided into two basic types based on structure: dependent suspension and independent suspension. Dependent suspension is used in conjunction with a solid axle and is mainly employed in commercial vehicles (trucks) or the rear suspension of off-road vehicles. In this type of suspension, the left and right wheels are not independent of each other. When one wheel moves relative to the frame or body due to uneven road conditions, the other wheel undergoes the same change.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.