How Far Can a Smart Car Go on a Full Tank?

How to Drive Better During the Break-in Period?

Better driving techniques for beginners during the break-in period are as follows: 1. Avoid overloading: The load capacity of the car during the break-in period should not exceed 75% of the rated load. New cars should be loaded below the specified weight and number of passengers, and must not be overloaded. 2. Do not drive at high speeds: There are speed limits for new cars during the break-in period. Domestic cars should stay within 40~70 km/h, while imported cars generally should not exceed 100 km/h. 3. Use high-quality gasoline: The gasoline used for new cars during the break-in period should not be lower than the octane rating specified by the manufacturer. Do not add anti-wear oil additives to avoid insufficient break-in despite reaching the required mileage.

18

3

Share

What is the difference between with T and without T?

There are the following differences between with T and without T: 1. With T: A car with T refers to the engine using turbocharging, where T stands for "TurboBoost", meaning turbocharging. Turbocharging utilizes the high-speed exhaust gas from the engine to drive the turbine, increasing the intake pressure, thereby increasing the intake air volume, making the fuel-air mixture burn more completely, and significantly improving the engine's power and torque, achieving exhaust gas reuse. 2. Without T: Without T means the car uses a naturally aspirated engine. A naturally aspirated engine only uses the negative pressure formed by the piston's downward movement to draw air into the cylinder and combustion chamber, while the exhaust gas is directly discharged without reuse. For engines of the same displacement, the naturally aspirated engine has a smaller intake air volume, and its power and torque are also lower.

10

3

Share

What is the actual fuel consumption of the Foton Cummins 3.8?

Foton Cummins 3.8 fuel consumption is around 16 liters. The reasons for the high fuel consumption of Cummins engines are as follows: Insufficient tire pressure: If the tire pressure is insufficient, fuel consumption will increase; if the tire pressure is normal, you can check the degree of tire wear. When the tires are severely worn, slipping often occurs, which also increases fuel consumption. Excessive carbon deposits: This can lead to higher fuel consumption in the car, which is likely caused by the use of substandard fuel. Oxygen sensor failure: The oxygen sensor mainly monitors the air-fuel ratio of the engine. Once it is damaged, it will cause an imbalance in the engine's air-fuel ratio, inevitably leading to abnormally high fuel consumption.

12

4

Share

How to Remove a Broken Spark Plug?

Methods to remove a broken spark plug: 1. Welding Method: Weld a thin, long iron bolt onto the broken spark plug head, then remove the broken spark plug; 2. Reverse Thread Tool: Special reverse thread tools for removing broken spark plugs are available in many places. Use the reverse thread tool to tap threads inside the broken spark plug head, then turn the tool to extract the broken piece. After removal, use a magnetic rod to clean up any fallen metal fragments as much as possible. If a properly sized long flat-head screwdriver is wedged into the broken head and force is applied to shatter it into the cylinder, then a magnetic rod is used to extract the broken spark plug fragments, this method not only damages the threads on the cylinder but also fails to clean up all the fragments, potentially harming the engine. Therefore, this method is not recommended.

16

1

Share

Where is the seat heating switch for the 2021 GL8?

2021 GL8 seat heating switch is located on the center control panel, marked with a seat icon and several curved lines, accompanied by three small indicator lights representing heating levels 1, 2, and 3. Seat heating working principle: Seat heating utilizes electric heating wires inside the seat to warm the seat interior, transferring heat to the occupant through thermal conduction, thereby alleviating discomfort caused by cold seats after prolonged parking in winter. Seat heating precautions: When the heating or ventilation function is in use and the vehicle is turned off, the heating or ventilation function will be deactivated. If the vehicle is restarted within 10 seconds, the heating or ventilation function will automatically resume at the previous setting. If the vehicle is restarted after 10 seconds, the heating or ventilation function will not restart automatically and must be manually reactivated by pressing the button again.

2

1

Share

What is the maximum memory card size generally supported by dash cams?

It can support memory cards up to around 128GB. Here are the relevant details: 1. Note: The memory card capacity used in vehicle dash cams should not be too large. Excessively large memory cards may cause issues with the dash cam, such as slow startup and operation speeds. It is recommended to use 32GB or 64GB memory cards. 2. Function: Dash cams can effectively record video footage and audio data while the vehicle is in motion. In the event of a traffic accident, the videos recorded by the dash cam can be used as evidence. Editing is not allowed; once edited, the footage cannot be used. Some models of dash cams can connect to two cameras: one recording the front and one recording the rear.

7

5

Share

How Far Can a Smart Car Go on a Full Tank?

How to Drive Better During the Break-in Period?

What is the difference between with T and without T?

What is the actual fuel consumption of the Foton Cummins 3.8?

How to Remove a Broken Spark Plug?

Where is the seat heating switch for the 2021 GL8?

What is the maximum memory card size generally supported by dash cams?

Is the Wuling Hongguang mini charged at 10A or 16A?

Does the Auto Start-Stop Function Harm the Engine?

How Long is the Battery Warranty for the RAV4?

What to Do If You're Afraid to Drive After Buying a Car?