How far can a 60V battery with five cells run?

Can a Manual Transmission Car Move Without Engaging a Gear?

Manual transmission cars can move without engaging a gear. There is a slight difference between automatic and manual transmissions. Engaging a gear means the engine is connected to the transmission and drivetrain. The engine's idle speed (relatively low RPM) is sufficient to drive the car forward. For a manual transmission, you need to release the handbrake, foot brake, and lift the clutch pedal to engage the power. In an automatic transmission, simply lifting the brake pedal allows the car to move. Working Principle of Manual Transmission: Manual transmission, also known as a manual gearbox, requires the driver to manually shift the gear lever to change the gear engagement inside the transmission, altering the gear ratio to achieve speed changes. The gear lever can only be shifted when the clutch pedal is depressed. Working Principle of Automatic Transmission: Automatic transmission, or automatic gearbox, uses planetary gear mechanisms to change gears. It automatically shifts gears based on the degree of throttle pedal input and changes in vehicle speed. The driver only needs to control the speed using the accelerator pedal.

13

5

Share

How Many Days Can You Exceed the Vehicle Inspection Deadline?

Vehicle inspection can be extended by one month after the expiration date. The annual vehicle inspection must not exceed the specified time frame, and the inspection can be conducted up to three months in advance or delayed by one month. If the inspection is delayed by two months, the driver will be fined and penalized with a 3-point deduction. Vehicle inspection includes checking the exterior; Inspecting whether the engine, chassis, body, and attached equipment are clean, complete, and functional, whether the paint is uniform and aesthetically pleasing, whether major assemblies have been replaced, and whether they match the initial inspection records. Vehicle inspection includes performance checks; Testing whether the vehicle's braking, steering, lights, exhaust, and other safety features comply with the "Technical Conditions for Safe Operation of Motor Vehicles." Vehicle inspection includes document verification; Checking whether the vehicle has been modified, remodeled, or altered, whether the license plate, registration certificate, and vehicle records match the actual condition, whether there have been any changes, and whether approval and modification procedures have been completed. Inspecting whether the license plate, registration certificate, or enlarged license plate markings on the vehicle are damaged, altered, or illegible, and whether replacements are needed.

12

2

Share

Will a Faulty Exhaust Valve Affect Engine Power?

Yes, a faulty exhaust valve can affect engine power. When the exhaust valve is damaged, it cannot properly control the amount of exhaust gas recirculation. Excessive exhaust gas participating in recirculation will affect the ignition and performance of the air-fuel mixture, thereby impacting the engine's power output. This effect is particularly noticeable during engine idle, low-speed operation, small loads, and when the engine is cold. Exhaust Valve: The exhaust valve, also known as an oil separator or pressure control valve, is installed between the compressor outlet and the condenser inlet. Through separation, it improves the heat transfer efficiency in the condenser and evaporator. Working Principle of the Exhaust Valve: High-pressure gas (comprising gaseous working fluid and lubricating oil) discharged from the compressor enters the exhaust valve and passes through its guide vanes. The gas flows in a spiral pattern along the guide vanes, and centrifugal force and gravity separate the lubricating oil from the working fluid gas. The oil flows down along the inner wall of the cylinder. The working fluid gas passes through a multi-hole baffle and is discharged from the central pipe of the exhaust valve. The separated lubricating oil accumulates at the bottom of the oil separator and can be periodically drained or automatically returned to the compressor's crankcase via a float valve.

4

0

Share

What Parts to Replace When the Heater Isn't Hot?

When the heater isn't hot, you may need to replace the thermostat. The reasons for the heater not being hot include: insufficient coolant, damaged thermostat, clogged heat exchanger, circuit failure in the heating system, etc. The details are as follows: Insufficient Coolant: Due to damaged components in the engine's water circulation system, leaks at interfaces, or blown cylinder gaskets, the coolant may be insufficient. This results in only a small amount or no coolant circulating in the heater pipes, causing the heater to not produce heat. The solution is to ensure the engine's water circulation system is functioning properly and then replenish the coolant. If there are other issues, repair them first and then add coolant to the normal level. Thermostat Malfunction: If the thermostat was damaged during previous repairs due to issues like high water temperature, it might remain stuck in the open position. This causes the engine's water circulation to stay in a large loop continuously. Combined with low external temperatures and efficient heat dissipation, the engine's water temperature struggles to rise, leading to a lack of heat from the heater. The solution is to install or replace a new thermostat.

8

4

Share

What does DOT on tires mean?

Tire DOT refers to the certification by the U.S. Department of Transportation, usually followed by a series of numbers and letters, which respectively indicate the tire's origin information and factory code. The last four digits represent the tire's production date. Tires are circular elastic rubber products mounted on metal rims, designed for rolling contact with the ground on various vehicles or machinery. They support the vehicle body, absorb external shocks, ensure contact with the road surface, and maintain driving performance. Tires operate under complex and demanding conditions, enduring various deformations, load forces, and high and low temperatures during use, while providing high load-bearing capacity, traction performance, and cushioning ability.

19

4

Share

How to Turn on the Heater in BYD e5?

The method to turn on the heater in BYD e5 is: Press the AC button, then press the temperature increase button to adjust the cabin temperature setting. Taking the 2018 BYD e5 as an example, its body dimensions are: length 4680mm, width 1765mm, height 1500mm, wheelbase 2660mm, front track 1525mm, rear track 1520mm, and trunk capacity 450L. The 2018 BYD e5 has a maximum power of 160kW, maximum torque of 310Nm, matched with a single-speed electric vehicle transmission. It adopts a front MacPherson independent suspension and a rear multi-link independent suspension.

15

3

Share

How far can a 60V battery with five cells run?

Can a Manual Transmission Car Move Without Engaging a Gear?

How Many Days Can You Exceed the Vehicle Inspection Deadline?

Will a Faulty Exhaust Valve Affect Engine Power?

What Parts to Replace When the Heater Isn't Hot?

What does DOT on tires mean?

How to Turn on the Heater in BYD e5?

How Long Can a Four-Wheel Electric Vehicle Last?

Is It Correct to Use Low Beams When Passing Through an Unsignalized Intersection at Night?

What is the top speed of the domestic Ninja?

Does a traffic violation need to be handled where it occurred?