How effective are BMW's laser headlights?

1 Answers
LeKennedy
07/30/25 4:51am
With a maximum range of 600 meters (limited to 450 meters domestically in China), it far surpasses existing LED and xenon headlights. Here are the specific details: 1. Advantages of LED headlights: Energy-efficient and compact in size, yet fundamentally, they are still scattered light sources. However, since current LEDs are COB (Chip on Board, meaning they are soldered onto circuit boards), the circuit board itself restricts LEDs to emit light only upwards, resulting in slightly better energy efficiency for LEDs. 2. Laser headlights: Laser is currently the only non-divergent light source among artificial light sources. Automotive headlights aim for long-distance visibility, minimal divergence, and low energy consumption. Laser is the most ideal artificial light source, offering completely direct illumination. BMW's laser headlights also require controlled scattering of the laser light source and reflection onto the road.
Was this review help?
1
5
Share
More Forum Discussions

Can National 6 Diesel Vehicles Enter Urban Areas?

National 6 diesel vehicles can enter urban areas. National 6a Standard: For every kilometer driven, the carbon monoxide emissions must not exceed 700 milligrams. For every kilometer driven, the non-methane hydrocarbon emissions must not exceed 68 grams. For every kilometer driven, the nitrogen oxide emissions must not exceed 60 grams. For every kilometer driven, the PM (particulate matter) emissions must not exceed 4.5 grams. National 6b Standard: For every kilometer driven, the carbon monoxide emissions must not exceed 500 milligrams. For every kilometer driven, the non-methane hydrocarbon emissions must not exceed 35 grams. For every kilometer driven, the nitrogen oxide emissions must not exceed 35 grams. For every kilometer driven, the PM (particulate matter) emissions must not exceed 3 grams.
5
0
Share

What Causes Wavy Patterns in Car Paint Reflection?

The main reasons for wavy patterns in car paint reflection are: 1. Dirt Particles: This occurs due to inadequate cleaning of the paint booth during the painting process, resulting in defects after painting. The usual repair method involves sanding and polishing the paint surface. If the dirt particles are large or located in the underlying layers, repainting is required. 2. Water Droplets: This is also a type of dirt particle issue, caused by environmental humidity and improper maintenance of the air compressor, leading to water accumulation in the paint lines. The repair method depends on the paint thickness and typically involves sanding and polishing. Otherwise, repainting is necessary. 3. Glue Repair: Based on the described phenomenon, if a transparent color effect appears, past management cases indicate that painters sometimes use small drops of glue to repair minor pits or dirt particles found on the paint surface after painting.
10
2
Share

What are the length, width, and height dimensions of the Q5 body?

The length, width, and height dimensions of the Q5 body are 4629mm, 1898mm, and 1655mm respectively, with a wheelbase of 2807mm. The Audi Q5 is a dynamic and versatile SUV. In terms of exterior design, its signature Audi chrome "Singleframe" grille highlights its fashionable and sporty design style, while its integrated headlights appear more lively compared to the A4 model. For the interior, the Audi Q5 features a reasonably simple layout, rich and practical configurations, and a strong sense of technology. In terms of power, the Q5 is equipped with a 2.0TFSI four-cylinder in-line engine paired with a 7-speed S tronic dual-clutch transmission, delivering ample power output, smooth gear shifting, and quick acceleration.
13
2
Share

What Causes Overheating in a Dry Dual-Clutch Transmission?

Dry dual-clutch transmission overheating can be attributed to the following reasons: Engine and high coolant temperature: Prolonged engine overload can raise the coolant temperature, affecting the transmission's heat dissipation. Additionally, insufficient coolant in the radiator reduces the cooling system's efficiency, leading to transmission overheating. Transmission clutch slipping: Clutch slipping generates additional heat, increasing the transmission temperature, degrading the transmission fluid quality, and accelerating transmission wear. Thermostat sticking: If the transmission's thermostat sticks, the transmission fluid cannot circulate into the cooling system, preventing the dissipation of heat generated by the transmission. Insufficient transmission fluid: Low transmission fluid levels can increase gear shift jerking and reduce cooling efficiency, causing the transmission temperature to rise and potentially damaging internal components.
13
3
Share

What causes the total mileage of the Jeep Cherokee to flash?

Free light total mileage flashing is a problem with the speed alarm setting, which can be adjusted by yourself. Total mileage: The total accumulated driving mileage of the car odometer, measured in kilometers (km); the car odometer actually consists of two meters, one is the speedometer and the other is the odometer; the car odometer is generally located directly in front of the driver's position; the car odometer also includes two LCD digital display windows connected to the same signal source, which respectively accumulate the current mileage and the total mileage. Fuel mileage: Refers to the total mileage that vehicles such as cars and ships can continuously travel with maximum fuel reserves. The driving range of an electric vehicle refers to the mileage traveled from the fully charged state of the power battery to the end of the test specified by the standard, which is an important economic indicator of electric vehicles.
17
3
Share

Is the Misfire in Cylinder 4 a Serious Problem?

Misfire in cylinder 4 is a serious issue. Here is the relevant information: 1. Cylinder pressure: The misfire in cylinder 4 is caused by internal wear or damage, resulting in insufficient cylinder pressure. Possible causes include faulty ignition coils or spark plugs, issues with the fuel injector wiring or clogged injectors, or the possibility of the fourth cylinder injector failing and cutting off fuel supply. Other factors may include fuel pressure, fuel lines, or fuel quality. It is recommended to conduct a repair as soon as possible. 2. Electronic faults: The engine control unit (ECU) may be damaged or generate fault codes. The solution is to check the cylinder pressure of each cylinder. Generally, the cylinder pressure for most vehicles is around 1300 kPa. Address any cylinders with abnormal pressure.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.