How Early Should You Arrive for the Subject 4 Test?

1 Answers
OJustin
07/30/25 9:53am
Subject 4 test arrival time depends on the test schedule. The first morning session starts at 8:30, while the first afternoon session begins at 13:30. It is recommended to arrive 0.5-1 hour early. Below are specific details about Subject 4: Test Duration and Scoring: The Subject 4 test lasts 45 minutes, consisting of 50 questions with a total score of 100. A passing score is 90, and the test includes true/false, single-choice, and multiple-choice questions. Main Test Content: Safe and civilized driving requirements, safe driving knowledge in adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge. Document Issuance After Test: After passing Subject 4, candidates must undergo at least 30 minutes of traffic safety and civilized driving education, including accident case studies, participate in a swearing-in ceremony, and finally receive their driver's license. If it cannot be issued on the same day, it will be mailed to the driving school or the address provided by the candidate.
Was this review help?
5
3
Share
More Forum Discussions

How to Replace the Key Battery for the 2018 Lavida?

The method to replace the key battery for the 2018 Lavida is as follows: 1. Remove the mechanical key from the smart key, which is the L-shaped key; 2. Use the L-shaped key to pierce the shallow groove of the smart key all the way down, causing the back cover of the smart key to pop off automatically; 3. Take out the old battery, replace it with a new one, and then reattach the back cover and the mechanical key. The 2018 Lavida is a compact car with the following dimensions: length 4605mm, width 1765mm, height 1460mm, wheelbase 2610mm, fuel tank capacity 52.8L, and curb weight 1210kg.
13
1
Share

What displacement motorcycles are allowed on highways?

Motorcycles with an engine displacement above 50cc are permitted on highways. The regulations and requirements for motorcycles legally using highways are as follows: Regulations for motorcycles legally using highways: According to Article 67 of the "Road Traffic Safety Law of the People's Republic of China": Pedestrians, non-motor vehicles, tractors, wheeled special machinery vehicles, articulated buses, full trailer trucks, and other motor vehicles designed with a maximum speed below 70 kilometers per hour are not allowed to enter highways. The above regulations do not include a prohibition on motorcycles. Therefore, motorcycles can legally drive on highways. Requirements for motorcycles on highways: Highways have explicit speed regulations. The maximum speed for cars is 120 km/h, but motorcycles on highways cannot exceed 80 km/h, and the minimum speed cannot be below 60 km/h. This can indeed be challenging for riders who are not adept at controlling their speed. Within this speed range, there is only a 20 km/h fluctuation, making it easy to exceed the speed limit or fall below the minimum speed requirement if not carefully managed.
16
1
Share

What is the replacement interval for ignition coils?

Ignition coils typically need replacement every 100,000 kilometers. As a core component in the engine ignition system, the ignition coil primarily functions to intermittently convert the vehicle's low-voltage electricity into high-voltage electricity. The replacement procedure for ignition coils is as follows: 1. Open the ignition coil cover on top of the engine and remove the fixing screws using a pentagonal wrench; 2. Disconnect the ignition coil power plug, gently pry it up with a screwdriver, and remove the ignition coil; 3. Install the new ignition coil, tighten the screws, and reconnect the power plug. Causes of ignition coil failure include: 1. The engine not running while the ignition switch remains on for an extended period; 2. Engine overheating, causing the coil's insulating varnish to melt and fail; 3. Excessive spark plug electrode gap, increasing the ignition coil's load and leading to high-voltage coil breakdown, resulting in short circuits or open circuits; 4. High-voltage line breakage, preventing the generated high-voltage electricity from flowing, which can easily cause the high-voltage coil to break down.
17
3
Share

How often should the spark plugs on a Corolla be replaced?

The spark plugs on a Corolla should be replaced every 80,000 kilometers. The replacement method for Corolla spark plugs is as follows: 1. There is a plastic engine cover on top of the engine; remove it using a screwdriver. 2. Clean the dust and oil around the high-voltage wire terminals, then use a socket wrench to loosen the fixing screws of the high-voltage wire terminals. 3. After removing the high-voltage wire terminals, use a socket wrench to loosen the spark plugs. 4. Remove the old spark plugs and replace them with new ones. The Corolla is a compact car produced by FAW Toyota, with dimensions of 4635 mm in length, 1780 mm in width, and 1455 mm in height, and a wheelbase of 2700 mm. In terms of power, the Corolla is equipped with a turbocharged engine that delivers a maximum horsepower of 116 hp, a maximum torque of 185 Nm, and a maximum power output of 85 kW.
11
4
Share

What to Do When the Car Fuel Tank is Full?

If driving in the city for a long time, it's best not to fill up the fuel tank completely, as a full tank can increase fuel consumption. The impacts of a full fuel tank are as follows: First refueling for a new car: It's best not to fill it up completely, as overfilling may cause the fuel gauge and sensor to malfunction, leading to inaccurate fuel gauge readings. Try not to overfill when refueling. Harm to the carbon canister: The fuel vapor adsorption and desorption device in gasoline vehicles, commonly known as the carbon canister, is a device that reduces the emission of gasoline vapors from the car's fuel tank. Overfilling the tank leaves no space at the top of the fuel tank, leaving no room for the gasoline vapors to escape. As a result, liquid gasoline instead of gasoline vapors enters the carbon canister, causing harm to it. Since gasoline contains various harmful substances, prolonged exposure to gasoline vapors can be detrimental to health and may even lead to cancer.
7
2
Share

What disinfectant should be used for car disinfection?

Dilute 84 disinfectant with 5% chlorine content 200 times with water. If not diluted proportionally, it will be corrosive. Spray and wipe the car for disinfection. You can also buy 75% alcohol to disinfect the interior parts of the car. Pour the alcohol onto a towel and then wipe various parts of the car interior. Since alcohol is flammable, car owners should pay attention to fire prevention or purchase Lysol for car disinfection. In the future, mix Lysol with water into a 1%~3% solution, then wipe the surfaces of the car's interior parts and ventilate the car after wiping. Car disinfection has a certain impact on the health of drivers and passengers. The cleanliness of the car interior directly affects driving comfort and safety. Opening windows for ventilation can also improve the air quality inside the car. However, there are many gaps and hard-to-reach areas in the car, which can make cleaning unnecessarily troublesome. Under specific conditions, bacteria can easily grow, causing the interior to mold. When seasons change, it is also a time when diseases frequently occur. Simply opening windows for ventilation is often not enough, and car disinfection is necessary.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.