···
Log in / Register

How early should I arrive for the Subject 2 driving test?

3 Answers
StEmmett
08/28/25 7:33am
Arrive at the test center one hour early for the Subject 2 driving test. Below is some information about the required training hours for Subject 2: Training duration: A1, B1: 36 hours required; A2: 40 hours required; A3: 53 hours required; B2: 54 hours required; C1: 16 hours required; C2: 14 hours required. Each training hour is 60 minutes, with effective teaching time not less than 45 minutes. The above are the basic required hours. If your skills are weaker or if additional test content and items are added, corresponding extra hours are needed. Time required: According to relevant regulations, each student's classroom learning time must not exceed 4 hours per day, and practical operation learning time must not exceed 4 hours per day. C1 Subject 2 requires a total of 16 hours. If you study 4 hours every day, you can complete it within one week.
Was this review help?
6
2
Share
ValeriaLee
09/10/25 5:48am
When I took the driving test for Subject 2, I arrived at the test center about 50 minutes early, only to find many people already queuing up. The weather was sunny that day, but there was some traffic congestion on the road. Fortunately, leaving early prevented me from being late. At the test center, I had to check in, present my ID card, and show the appointment slip, which took over ten minutes. Arriving early also allowed me to familiarize myself with the layout of the test area, such as the spot for the reverse parking exercise, which helped ease my nerves. Before the test, I made a quick trip to the restroom to calm my breathing and avoid making mistakes due to nervousness. In short, I recommend arriving 45 to 60 minutes early for a more secure experience, especially during peak hours or at a new test center. Being late would result in immediate cancellation of the test, wasting all your effort. Also, don’t forget to bring water and snacks to maintain your energy.
Was this review help?
9
5
Share
Expand All
StLucia
10/24/25 6:37am
For the Subject 2 driving test, make sure to allow ample time and avoid rushing at the last minute. I recommend arriving at the test center one hour early, as the check-in and queuing processes are often overlooked. Upon arrival, complete the registration procedures first—staff will verify your information and assign your sequence. Arriving early allows you to familiarize yourself with the surroundings, such as road gradients or signage, reducing operational errors. Traffic conditions are unpredictable; for instance, I once encountered slippery roads due to rain and nearly arrived late. Exam mindset is crucial—arriving early helps you relax, hydrate, or review key points. Arriving just 30 minutes early carries significant risks, such as difficulty finding parking or slow security checks, which may cause delays. Remember, safe habits start with small details.
Was this review help?
19
0
Share
Expand All
More Forum Discussions

Under what circumstances will the turn signal automatically reset?

After activating the turn signal, it typically involves making a turn. When the turn is completed and the steering wheel returns to the straight position, the turn signal will automatically reset and turn off. This is directly related to the steering wheel's rotation angle. Generally, when the steering wheel is turned to a certain angle and then returns to its original position, the turn signal will follow and automatically reset. However, during lane changes, since the steering wheel's rotation is minimal, the turn signal needs to be manually reset and turned off. The function of turn signals: Turn signals are the primary devices indicating a vehicle's dynamic information. Installed at the front and rear of the vehicle, they are activated during turns to enhance driving safety. For the safety of both the driver and others, please use turn signals as required to inform others of the vehicle's movement in advance, allowing for correct judgment. How turn signals work: Turn signals are crucial indicators that activate when a motor vehicle turns to alert surrounding vehicles and pedestrians. The turn signal bulbs use xenon tubes, controlled by a microcontroller circuit, flashing alternately and continuously. Turn signals employ flashers to achieve blinking lights, which can mainly be categorized into three types: resistance wire type, capacitor type, and electronic type.
16
5
Share

What car has a red shield logo?

The red shield emblem with a white cross inside represents Pontiac. Its product lineup includes the following models: 1. Sunfire: As Pontiac's entry-level model, the Sunfire appeals to young customers who favor sporty brands. Available in sedan, coupe, and convertible variants, all Sunfire models exclusively feature 4-cylinder engines - with the 2.2L 2-valve engine as standard and the 2.4L 4-valve engine as an upgrade option. 2. Grand Am: In the lower-midrange sedan segment, Pontiac offers the Grand Am in both sedan and coupe versions. Sportier variants carry the GT designation. Within the GM family, these models primarily use the widely adopted 2.4L 4-valve 4-cylinder engine originally developed by Oldsmobile, along with an available 3.4L V6 option. 3. Grand Prix: Among GM's extensive mid-size sedan offerings, the Pontiac Grand Prix stands out with its most athletic styling. This sporting character extends to its powertrain strategy: the Grand Prix exclusively uses 6-cylinder engines, with the 8-cylinder model featuring a 3.1L V6, while higher trims come with a 3.8L engine equipped with either traditional intake manifolds or superchargers.
6
2
Share

How to reset the maintenance light on Zhonghua V3?

Zhonghua V3 maintenance light reset steps are as follows: 1. First, the driver needs to enter the main cabin and ensure all four doors are closed. 2. Then insert the key into the ignition and turn it to the OFF position. 3. The maintenance reset button for Zhonghua V3 is located in the middle of the instrument panel. Use your left hand to press and hold the reset button. 4. While holding the reset button with your left hand, turn the key to the ON position with your right hand and wait briefly. 5. Finally, the wrench icon on the instrument panel will disappear, indicating the maintenance light has been successfully reset.
14
3
Share

What is the function of the illuminated mirror light?

The illuminated mirror light indicates the side assist and lane change assist function, also known as blind spot detection. The working principle involves installing several detection radars on the side of the car. If another vehicle accelerates and approaches from the left or right rear, the radar detects this information and alerts the driver by illuminating the mirror. This enhances convenience and safety while driving. In such situations, the driver should avoid changing lanes and maintain the current lane to prevent accidents and vehicle damage. The vehicle's lane change assist function can detect objects up to 50 meters behind the driver. When the speed reaches 60 km/h and there is a need for a lane change, the system will automatically activate. The lane change assist function is particularly useful in low-visibility conditions such as fog, heavy rain, snow, or dimly lit environments at night. It helps mitigate safety risks caused by the driver's inability to clearly see vehicles behind through the mirrors. Vehicle mirrors come with multiple functions, including blind spot monitoring and warning systems, turn signal systems, mirror heating systems, power folding, power adjustment, and automatic tilt-down when reversing. Mirrors are crucial and indispensable components of a vehicle. If damaged, they should be promptly repaired or replaced. As a critical safety component, the mirror's surface, shape, and operation are carefully designed. Therefore, the quality and installation of mirrors must comply with industry standards and specifications and cannot be altered arbitrarily.
14
1
Share

What is the replacement interval for Nissan Sylphy brake discs?

Nissan Sylphy brake discs do not have a fixed replacement interval and need to be determined based on specific conditions. The details are as follows: 1. During maintenance at a 4S shop, the brake discs will be inspected. If abnormal wear, cracks, excessive thinness, significant cylindricity error, unsmooth rotation, or unusual noises are found, replacement may be necessary. 2. If driving habits are excellent or the driving environment is favorable, brake discs can last a lifetime, but it is recommended to inspect them every 60,000 kilometers. 3. Additionally, front brake discs wear faster than rear ones, so it is generally sufficient to inspect the front brake discs first.
9
0
Share

What are the benefits of waxing a car?

Waxing a car can provide protection for the vehicle body. Here is an introduction to the benefits of waxing: 1. Reduces water droplet adhesion on the car body surface. 2. Minimizes the concentration of sunlight by water droplets. 3. Protects the car paint. 4. Forms a protective layer between the car paint and harmful substances such as acid rain, dust, and toxic gases. 5. Acts as a barrier to prevent direct contact with the car body. Here are some car body care methods: 1. Regular waxing (maintain good habits from the time of purchase). 2. Clay bar treatment (waxing). 3. Polishing (waxing). 4. Glazing (not recommended). 5. Paint coating.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.