How Early Can You Obtain the Vehicle Annual Inspection Sticker?

2 Answers
LeLevi
07/29/25 3:40am
According to Article 40 of Order No. 102 issued by the Ministry of Public Security of the People's Republic of China, vehicle owners can apply for the inspection compliance sticker at the local vehicle management office up to three months before the expiration of the current inspection validity period. Here are some details about the annual inspection sticker: 1. Eligibility: Private cars within the first 6 years are eligible for the exemption-from-inspection policy, requiring only a biennial sticker renewal; private cars older than 6 years must pass an annual inspection at a vehicle inspection center before obtaining the sticker. 2. Inspection Frequency: For passenger transport vehicles, within the first 5 years, an annual inspection is required; if older than 5 years, inspections must be conducted every 6 months. For trucks and large or medium-sized non-passenger transport vehicles, within the first 10 years, an annual inspection is required; if older than 10 years, inspections must be conducted every 6 months.
Was this review help?
11
3
Share
McDaisy
08/12/25 7:29am
I've owned my car for several years now. The vehicle inspection sticker can usually be obtained about 30 days before the inspection expires, which is exactly how I handled it last year. As the deadline approaches, the DMV will send a notification, or you can check the website yourself. I recommend taking action early and not waiting until the last minute, as there might be long queues, and if your documents are incomplete, you might have to make multiple trips. Just bring your vehicle registration, ID card, and compulsory insurance policy, and it'll be done in minutes. If you fail to get the sticker on time, you might face fines, and your car could be prohibited from driving on the road, which would be quite inconvenient. So, make it a habit to regularly check your inspection date—safety always comes first.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

What Are the Effects of Leaving a Diesel Vehicle Idling Overnight?

Leaving a diesel vehicle idling overnight can lead to carbon buildup, oil leakage, and engine damage. Below is more detailed information: 1. Vehicle Idle Speed: Vehicle idle speed refers to an operating condition. When the engine runs without load, it is called idling, meaning the vehicle is in neutral gear. The engine speed during idling is referred to as idle speed. The idle speed can be adjusted by altering the throttle opening size, among other methods. Idling essentially means the engine is "running without doing work." When the engine is operating, if the accelerator pedal is fully released, the engine enters an idle state. Adjusting the idle speed should avoid sudden increases or decreases in RPM, as this can cause premature engine wear. It is best to have this adjustment performed by an automotive repair service. 2. Normal Idle Speed: When the vehicle is parked and the engine is started, the minimum stable operating speed of the engine is called parking idle speed (the process of the engine transitioning from a cold idle state to reaching the idle speed at normal operating temperature is called warming up or heating up). 3. Driving Idle Speed: When the vehicle is in gear, without pressing the accelerator pedal or releasing it while driving, maintaining the minimum throttle opening, the engine speed matches the parking idle speed. This state is referred to as driving idle speed.
17
5
Share

Where is the Camshaft Position Sensor Installed in a Car?

The camshaft phase sensor needs to face the signal wheel to collect signals, so the camshaft phase sensor is generally installed at the front end of the camshaft cover, facing the front end of the intake and exhaust camshafts. The camshaft position sensor is a sensing device, also known as a synchronization signal sensor. It is a cylinder identification and positioning device that inputs camshaft position signals to the ECU and serves as the main control signal for ignition. Camshaft Position Sensor Removal Method: First, it is recommended to disconnect the negative terminal of the battery before removing the sensor. Then, release the camshaft position sensor (CMP) connector from the bracket and disconnect the connector. Next, release the camshaft position sensor (CMR) wiring harness from the clip. Finally, unscrew the bolt securing the camshaft position sensor (CMP) and remove the sensor. Camshaft Position Sensor Installation Method: First, clean the camshaft position sensor and the mating surface. Then, secure the camshaft position sensor (CMP) by installing the bolt and tightening it to 10N.m. Next, connect the camshaft position sensor (CMP) connector and secure it to the bracket. Finally, reconnect the battery's ground terminal to complete the installation.
19
2
Share

What Driver's License is Required to Drive a Medium-sized Passenger Vehicle?

Medium-sized ordinary passenger vehicles require a B1 or higher-level driver's license to operate. The standard for medium-sized passenger vehicles is that they do not exceed 6 meters in length and have a rated passenger capacity of 10 (inclusive) to 19 (inclusive) people. The requirements for obtaining a B1 driver's license are: the applicant must be between 21 and 50 years old; must have held a C1 driver's license for more than three years; and must not have any record of accumulating 12 penalty points in the current scoring cycle or the most recent scoring cycle before applying for the B1 license upgrade. Regulations stipulate that the application for upgrading to a B1 driver's license can only be processed at the local vehicle management office in the driver's registered residence, not in other locations. Holders of a B1-level driver's license are permitted to drive not only the corresponding vehicle types but also C1 and M vehicle types. B1 license holders are required by regulation to undergo an annual review, which mainly involves education and a physical examination. However, if no penalty points are accumulated during the scoring cycle, the annual review for that year can be waived.
15
5
Share

How to Connect Audi CarPlay?

In the settings of your iPhone, locate the access permissions, enter the interface, and enable the CarPlay function. Enter CarPlay, then you will enter the connection interface, use a USB cable to connect your phone and the car's system. On your phone, click to allow "MyLink", then enable Siri at the same time, after which CarPlay will be connected.
3
5
Share

What number should I call for one-touch vehicle moving service?

Call 114 for vehicle moving (limited to service-enabled areas and vehicle owners): Simply dial 114, provide the license plate number and location of the vehicle that needs to be moved to the operator, and the call will be directly transferred to the owner's mobile phone without revealing their number. Dial 114 information service hotline: 114 cannot directly provide the owner's phone number. After providing the license plate number and location to the operator, the call will be transferred to the owner's phone without disclosing their number. Upon dialing 114 and stating the license plate number, 114 will transfer the call to the owner. To better protect the owner's privacy, the phone number is only transferred, not disclosed. However, this service requires the owner to register their mobile number and license plate number with China Unicom in advance. If not registered, 114 cannot assist. Call 122 to contact traffic police: Dial the 122 emergency hotline, provide the license plate number of the obstructing vehicle, and the traffic police will contact the owner to request moving the vehicle. As a traffic accident emergency number, 122 also offers this public service function. Upon receiving reports of blocked vehicles, 122 will dispatch traffic police from the relevant jurisdiction to contact the obstructing vehicle owner.
2
5
Share

What is the difference between the three-cylinder and four-cylinder versions of the X-Trail?

The difference between the three-cylinder and four-cylinder versions of the X-Trail is that the three-cylinder version has one less cylinder than the four-cylinder version, resulting in a smaller overall size and more available space. On a mechanical level, the main difference between three-cylinder and four-cylinder engines lies in the number of cylinders. Since the three-cylinder engine has one less cylinder than the four-cylinder engine, its size is more compact. Some consumers might assume that having one less cylinder significantly reduces power, but this is not necessarily the case. Many four-cylinder engines are naturally aspirated, while three-cylinder engines often use turbocharging, meaning some three-cylinder engines can have comparable performance metrics to their four-cylinder counterparts. In terms of vehicle applications, the smaller size of the three-cylinder engine makes it easier to accommodate hybrid system components, such as electric motors, within the engine bay—space that might be insufficient in four-cylinder configurations. The function of a cylinder: It converts the pressure energy of compressed air into mechanical energy, driving mechanisms to perform linear reciprocating motion, oscillation, and rotational movement. A cylinder is a cylindrical metal component that guides the piston in linear reciprocating motion within it. In an engine, the working medium expands inside the cylinder to convert thermal energy into mechanical energy; in a compressor, the gas is pressurized by the piston within the cylinder.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.