···
Log in / Register

How early can the vehicle annual inspection sticker be obtained?

3 Answers
VivianMarie
07/23/25 6:38pm
Vehicle annual inspection stickers can be obtained 3 months in advance. Below is relevant information about vehicle annual inspections: Introduction to vehicle annual inspection: The timing of vehicle annual inspections is not calculated based on specific dates, but rather by month. If a vehicle's annual inspection is due on September 10th, the inspection can be conducted in advance during July, August, or September. Important notes: Vehicles that fail to undergo annual inspection on time and continue to be driven will be subject to fines and 3 penalty points, and the vehicle may be impounded. If the annual inspection is overdue, previously purchased vehicle insurance will not be valid. In case of any traffic accidents during this period, the insurance company will not provide compensation.
Was this review help?
13
3
Share
LaEmersyn
08/10/25 2:12pm
I remember the vehicle inspection decal can be obtained up to 90 days in advance, just like I arranged last time. Checking the date reminds me to act early. Otherwise, missing the inspection deadline could make me nervous during the test and disrupt daily commutes. I usually set calendar reminders to avoid forgetting. During inspections, they typically check lights, brakes, etc., so booking a service center appointment in advance saves queuing time. If caught with an expired decal, there might be fines or penalty points – I've seen people get caught out. Overall, developing early habits matters – safety first. I also like to give my car a quick wash before collecting the decal to leave a good impression.
Was this review help?
17
1
Share
Expand All
DelilahRose
09/22/25 9:01am
As a new car owner, I learned that the vehicle inspection sticker can be obtained up to 90 days in advance, which gives me a lot of flexibility. When I first bought the car, I was nervous about the process, but later found out that I only needed to bring the vehicle registration certificate to the DMV or an authorized location. Online appointments also save time. I prefer to start preparing a bit early, like one month in advance, checking the car's condition to ensure there are no major issues. During the inspection, tire wear is often checked, so I always check the tire pressure beforehand. Getting the sticker early avoids last-minute rushes that could disrupt weekend travel plans. Additionally, I heard that some places even offer mail-in processing, which is quite convenient, but I still feel more at ease going in person.
Was this review help?
17
4
Share
Expand All
More Forum Discussions

Does the Geely Xingrui have a data usage limit for in-car connectivity?

Some models of the Geely Xingrui have a data usage limit for in-car connectivity. Here is some relevant information about Geely: 1. Brand Portfolio: Geely Holding Group owns numerous internationally renowned brands including Geely Auto, Lynk & Co, Volvo Cars, Polestar, Proton, Lotus Cars, London Electric Vehicle Company, Yuan Cheng New Energy Commercial Vehicles, Terrafugia, Cao Cao Mobility, Homt, Saxo Bank, and Ming Tai. 2. Five Global Design Centers: Geely operates five global design centers with 20,000 R&D and design personnel, continuously delivering world-class design works to the global market.
13
0
Share

What does the BMW option button mean?

BMW option - The literal meaning of 'option' is choice or selection, which can also be understood as different BMW configuration choices. Here is relevant information: 1. Background: BMW automobiles refer to vehicles produced by Bayerische Motoren Werke AG (abbreviated as BMW). The main series include 1, 2, 3, 4, 5, 6, 7, and 8. The company is renowned worldwide for producing luxury cars, motorcycles, and high-performance engines. 2. Logo meaning: The BMW emblem features a double-circle design with the 'BMW' inscription above the concentric rings. The entire trademark resembles the blue sky, white clouds, and a continuously rotating propeller, symbolizing the company's long history while representing its consistent purpose and goals - to meet customers' greatest desires with the latest technology and most advanced concepts across vast time and space. It reflects the company's vigorous spirit and ever-evolving new style, demonstrating the superior quality, technological leadership, and global presence of BMW cars.
1
4
Share

What Causes the Abnormal Noise When the Camry Starts?

There are two reasons for the clicking sound when starting. First, the noise may come from a single brake system, and if not addressed promptly, it could affect all brakes. The second reason is that after washing the car or driving through water, moisture was not dried in time, causing the brake caliper piston or shoe block to fail to return to its original position. Here are the reasons for abnormal noise during startup: 1. Brake System: In southern regions, due to the humid and rainy climate in spring and autumn, long-term driving in such conditions can gradually cause the brake discs to rust. Especially for vehicles whose chassis has been soaked in water, the brake discs are more prone to oxidation and rust. At this time, simply ask a mechanic to sand off the rust on the brake discs during maintenance, and the abnormal noise will disappear. 2. During Startup: The noise may be caused by foreign objects stuck in the tread of the wheels, such as screws, stones, or other hard objects. Removing these foreign objects will solve the noise issue. However, if it's a screw, pay attention to whether the tire pressure has recently dropped, as sharp screws may puncture the tire, causing air leakage. 3. Chassis Issues: This is one of the most common faults. Many cars experience suspension aging after a certain period of use. At this point, some supporting components in the suspension gradually fail, causing abnormal noise from the chassis during startup. It is advisable to visit a 4S shop or professional repair shop promptly for chassis maintenance and inspection to check for loose, aged, or leaking bearings and replace the corresponding parts as needed.
1
0
Share

What are the dimensions of the BMW 7 Series?

The BMW 7 Series measures 5273*1902*1498 (mm) in length*width*height. Compared to the previous generation, the overall vehicle length and wheelbase have increased by 30mm and 80mm respectively, achieving a sporty exterior design through enlarged dimensions. Additionally, the long-wheelbase model has a wheelbase that is 140mm longer than the base model. This data is official. The length of the BMW 7 Series refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the car; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The latest BMW 7 Series features a 4-door, 5-seater sedan body structure, equipped with an 8-speed automatic transmission, a maximum torque of 450 (N·m), a maximum power of 250 (kW), and a turbocharged intake system. The entire series comes standard with leather interiors, at least 18-inch wheels, a sunroof, electrically adjustable and heated front seats, four-zone climate control, premium audio, a 12.3-inch digital instrument cluster, a 10.1-inch touchscreen infotainment system, and power functions. The rear seats offer over 44 inches of legroom, with reclining heated and cooled seats featuring built-in massagers. The BMW 7 Series is powered by a 3.0T V6 turbocharged engine, delivering a maximum horsepower of 340 and a peak torque of 450 N·m, paired with an 8AT transmission, compliant with the China VI emission standards, with an official 0-100 km/h acceleration time of just 5.1 seconds. The national regulations on vehicle dimensions include relevant stipulations. According to the national standard "GB1589-89," the total width of a vehicle excludes side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that in the national standard, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
4
5
Share

Is the Geely Xingyue a Three-Cylinder or Four-Cylinder?

Geely Xingyue has both three-cylinder and four-cylinder models. Here is some relevant information about Geely: 1. Brand Products: Geely Holding Group owns numerous internationally renowned brands, including Geely Auto, Lynk & Co, Volvo Cars, Polestar, Proton Cars, Lotus Cars, London Electric Vehicle Company, Farizon New Energy Commercial Vehicles, Terrafugia, Cao Cao Mobility, Homt, Saxo Bank, and Mingtai. 2. Five Major Design Centers: Geely has five major design and styling centers worldwide, along with 20,000 R&D and design personnel, continuously delivering world-class design works to the global market.
15
1
Share

Where is MG produced?

Imported models are produced in the UK. Domestic production takes place at the Nanjing Pukou High-Tech Development Zone, as MG is a British brand acquired by Nanjing Automobile Group. Additional information: 1. Company Introduction: MG, short for Morris Garages, is a British-origin automotive brand renowned for producing the famous MG series of convertible sports cars. MG sports cars have always been celebrated for their unique design, exquisite craftsmanship, and excellent performance. 2. Background: The father of MG is William Morris, a bicycle mechanic from Worcester, UK, who started with just £4 and established Morris Garages (MG) in 1910.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.