How early can a vehicle's annual inspection be conducted?

1 Answers
Archer
07/30/25 12:27am
Annual inspection applications can be submitted three months prior to the annual review date. The inspection schedule is as follows: 1. Small and micro non-commercial passenger vehicles must be inspected every 2 years within the first 6 years; after 6 years, annually; after 15 years, twice a year. 2. Commercial passenger vehicles must be inspected annually within the first 5 years; after 5 years, every 6 months. 3. Trucks and large/medium non-commercial passenger vehicles must be inspected annually within the first 10 years; after 10 years, every 6 months. 4. Motorcycles must be inspected every 2 years within the first 4 years; after 4 years, annually. 5. The annual inspection date is determined by the vehicle's initial registration date. For example, if the registration date on the vehicle license is June 2007, the annual inspection should be conducted every June. Article 40 of the 'Motor Vehicle Registration Regulations' stipulates that vehicle owners may apply for an inspection compliance mark at the local vehicle management office up to three months before the expiration of the current inspection validity period. For vehicles due in June, inspections can be conducted in April, May, or June.
Was this review help?
9
0
Share
More Forum Discussions

How to Test for Car Battery Drain with a Multimeter?

Method for testing car battery drain with a multimeter: 1. Rotate the multimeter's knob to the current measurement setting; 2. After selecting the appropriate range, insert the red probe into the corresponding jack; 3. After setting up the multimeter, turn off the engine and all electrical devices, then lock all doors; 4. Open the hood, disconnect the negative battery terminal, connect the multimeter's red probe to the vehicle's grounding wire, and connect the black probe to the negative battery terminal post. Observe the current reading displayed on the multimeter. A multimeter, also known as a volt-ohm-milliammeter (VOM), multitester, or combination meter, is an essential measuring instrument in power electronics and related fields. It is primarily used for measuring voltage, current, and resistance. Multimeters are categorized into analog (pointer) and digital types based on their display method.
13
3
Share

What is the introduction to the gears of Dongfeng Nissan automatic transmission cars?

Dongfeng Nissan automatic transmission gear introduction: 1. P is the parking gear: When the car is not in use, the gear is in this position; 2. R is the reverse gear: The car can only be shifted into R gear after coming to a complete stop and pressing the brake pedal; 3. N is the neutral gear: N gear is used for temporary stops such as at red lights; 4. D is the drive gear: When shifted into this gear, the driver's task is to control the throttle and brake; 5. S indicates sport mode, where the transmission can shift freely in this gear. Taking the Nissan Teana as an example, the car's dimensions are 4901mm in length, 1850mm in width, and 1447mm in height, with a wheelbase of 2825mm. The Teana features front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
1
0
Share

What car has a logo with five vertical bars?

The car with a logo featuring five vertical bars is WM Motor, headquartered in Shanghai, China. The company's name is derived from the German phrase meaning 'world champion,' and it is a rising domestic provider of new energy vehicles and mobility solutions. WM Motor's vehicle lineup includes the WM EX5, WM EX6 Plus, WM EX5-Z, and the WM Maven concept car. The WM EX5 is WM Motor's first mass-produced model, a pure electric intelligent SUV with a maximum range of 520 kilometers. The WM Maven concept car is the production concept version of WM Motor's first pure electric sedan, boasting an NEDC comprehensive range of 800 km and equipped with technologies such as Level 3 autonomous driving, Level 4 full-scenario automatic parking, and 5G connectivity.
8
1
Share

What are the dimensions of the Roewe RX5's trunk?

The Roewe RX5 trunk has a height of 770mm, maximum depth of 1740mm, external width of 1050mm, and internal width of 1290mm. Below is some knowledge about the trunk. Trunk structure: The basic structure consists of two core shaft drive rods. The drive rods are composed of a main shaft drive with an inner tube and an outer tube. The motor and gears inside the inner tube drive a threaded main shaft, which moves along a threaded nut fixed to the inner side of the outer tube. Electric struts use an electric main shaft located inside the motor within the strut to open and close the trunk lid, with springs also assisting in the lid opening operation. Trunk function: Drivers and passengers can open and close the tailgate by pressing the tailgate switch, using the remote car key, or by sensing with a hand or any object in the corresponding area of the tailgate. This allows for easy and quick storage of items in the vehicle when hands are full and opening the door is inconvenient.
16
4
Share

Where is the Equinox's Cabin Air Filter Located?

The Equinox's cabin air filter is located behind the glove compartment on the passenger side. To replace the cabin air filter, you will need to remove the passenger glove compartment. The cabin air filter is an important component of the car's air conditioning system, and it is crucial for the AC's performance. It needs to be replaced regularly; failure to do so over an extended period can affect the health of the vehicle's occupants and the efficiency of the car's air conditioning system. The Equinox is a vehicle produced by Chevrolet, featuring the brand's new family-style design and equipped with either a 1.5T or 2.0T engine. In terms of dimensions, the Equinox measures 4652mm in length, 1843mm in width, and 1693mm in height, with a wheelbase of 2725mm.
14
4
Share

What Causes a Strong Gasoline Smell After Starting the Car?

Car starting with a strong gasoline smell is caused by a damaged carbon canister, which can be resolved by replacing the new carbon canister; if the engine has an oil leakage issue, the leaked oil dripping onto the exhaust pipe can also result in a gasoline smell inside the car, requiring the replacement of the sealing gasket to fix the oil leakage problem. The carbon canister is part of the gasoline evaporation control system, which was introduced to prevent fuel vapors from escaping into the atmosphere after the engine stops running. The carbon canister installed in the car is actually an assembly, with its casing mostly made of plastic, filled internally with activated carbon particles that can adsorb vapors, and equipped with a purge control valve at the top to regulate the amount of gasoline vapor and air entering the intake manifold, along with a filter screen to purify gasoline vapors.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.