How Durable is the BYD 6-Speed Wet Dual Clutch Transmission?

2 Answers
PiperFitz
09/08/25 6:54am
BYD's 6-speed wet dual-clutch transmission is reliable and durable. Below is an extended introduction about BYD's dual-clutch transmissions: 1. Dry dual-clutch: The 6-speed dry dual-clutch can withstand a maximum torque of 250 Nm. When paired with a 1.5T engine, this dry dual-clutch tends to be less stable. Subsequently, BYD matched this 6DT25 with a low-torque 1.5L naturally aspirated engine. 2. Wet dual-clutch: The 6-speed wet dual-clutch can handle a maximum torque of 350 Nm. When paired with a 2.0T engine, this wet dual-clutch is relatively more stable. BYD has been cautious with powertrain matching, opting to pair this 6DT35 wet dual-clutch with 1.5T engines, such as in the Song series and 1.5T Qin series. The 1.5T engine produces a maximum torque of 240 Nm, while the 6DT35 can handle up to 350 Nm, providing a torque margin of over 100 Nm. Additionally, since both the ECU and TCU are produced in-house by BYD, the compatibility is excellent. The transmission performs finely with strong creeping at start-up, smooth gear shifts, delayed upshifts on slopes, and automatic gear adjustments based on speed when coasting or going downhill without throttle input. BYD has continuously upgraded and optimized components for this transmission, such as switching from in-house clutch plates to those manufactured by Schaeffler.
Was this review help?
8
4
Share
VanDaniella
09/20/25 5:25am
As someone who has been following automotive technology for a long time, I can say that BYD's six-speed wet dual-clutch transmission performs quite well in terms of durability. The wet design, which relies on oil cooling, effectively reduces overheating and wear, making it particularly suitable for city traffic congestion or long-distance driving. BYD has used reinforced materials and intelligent control logic to minimize jerking issues, and most owners report no major repairs even after driving over 100,000 kilometers. Regular transmission fluid changes are essential for daily maintenance—generally recommended every 40,000 to 50,000 kilometers—which can easily extend its lifespan to 150,000 kilometers. Of course, avoiding frequent hard acceleration or towing heavy loads is key to minimizing minor issues and keeping repair costs low. Overall, it ranks among the top in domestic vehicles and is trustworthy.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

Reasons for Noise When Driving an Eighth-Generation Accord

About the reasons for noise when driving an eighth-generation Accord are as follows: 1. Lack of power steering fluid or issues with the power steering pump. Check if the power steering fluid pipe is blocked. If metal shavings are found in the power steering fluid, parts of the power steering system need to be replaced. After checking for oil leaks in the pipe, if leaks are found, they should be replaced promptly. After replacing the leaking pipe and refilling the power steering fluid, if the power steering pump no longer makes a buzzing noise, it indicates a lack of power steering fluid. 2. Other reasons for noise when driving an eighth-generation Accord. Air in the hydraulic system not completely purged or deformation of the high-pressure oil pipe of the power steering pump. Note that whether the power steering pump is damaged or the oil pipe is leaking, after replacing with new parts, all old oil should be drained, and Honda's original power steering fluid must be used, as Honda's power steering pump has high requirements for oil quality.
9
2
Share

Is there a big difference in power between the Atenza 2.0 and 2.5?

The difference in power between the Atenza 2.0 and 2.5 mainly lies in the fact that the 2.5 has more power than the 2.0. Below is a detailed introduction to the power differences between the Atenza 2.0 and 2.5: 1. Sporty Performance: The difference in fuel economy between the Atenza 2.5L and 2.0L is almost negligible. In comparison, the 2.5L Atenza drives much more smoothly than the 2.0L, which is a characteristic of naturally aspirated engines, giving it better sporty performance. 2. Power Output: The difference in power is quite significant. The 2.5L engine offers more power, while the 2.0L engine is weaker.
8
2
Share

What is the average fuel consumption of the Fengjun 5?

The fuel consumption of the Fengjun 5 is 7.3L-10.8L/100km. To reduce fuel consumption, it is necessary to regularly clean engine carbon deposits: Severe carbon deposits in the engine can alter the original structural parameters of the engine, reduce engine power, and increase fuel consumption; in severe cases, it can also cause engine knocking, acceleration noise, damage to pistons and crankshafts, and even lead to engine oil burning, requiring major repairs. Maintenance of components to reduce fuel consumption: For example, engine and transmission fluids must be changed on time. If necessary, cleaning agents can be used to clean the engine and some important components, such as fuel injectors, throttle valves, and fuel lines. Inadequate maintenance can increase the vehicle's load, raise fuel consumption, and shorten the vehicle's lifespan.
7
3
Share

What is the fuel tank capacity of the Mazda CX-30?

The fuel tank capacity is 51L. Below is some related information about engine oil: Engine Oil: Engine oil is something you will encounter during car usage. It is referred to as the lifeblood of the engine. Without engine oil, the car's engine cannot operate normally. Inside the engine, oil not only lubricates but also cleans, seals, cushions, prevents rust, and dissipates heat. Oil Filter: The oil filter is used to filter engine oil. Without it, the oil would become dirty after some use. When purchasing engine oil and oil filters, always choose genuine products from reputable brands and ensure you buy them through official channels.
1
5
Share

Where is the air intake of the Fit located?

The air intake of the Fit is located at the lower right end of the windshield when in external circulation mode. If the internal circulation mode is activated, the air intake is located under the dashboard on the passenger side. Main functions of the car's air intake: To deliver clean, dry, sufficient, and stable air to the engine to meet its needs, preventing impurities and large particles of dust from entering the engine combustion chamber, which could cause abnormal wear. Another important function of the intake system is to reduce noise and control the air intake volume. Noise not only affects the vehicle but also impacts the interior noise level, significantly influencing ride comfort. Impact of air intake quality: The design quality of the intake system directly affects the engine's power and noise level, which is related to the overall ride comfort of the vehicle. Properly designing muffler components can reduce subsystem noise and improve the vehicle's NVH performance.
8
3
Share

Should the Golf 6 1.4T use 92 or 95 octane gasoline?

Volkswagen Golf 6 1.4T should use 95 octane gasoline. The following is additional information: Engine oil selection for Volkswagen Golf: Due to the high working power of the engine in the Volkswagen Golf, the internal temperature of the engine is very high during operation. Therefore, using high-viscosity engine oil can protect the internal components of the engine and provide cooling and lubrication functions. Engine oil is a crucial factor affecting engine performance and lifespan. The vehicle is factory-filled with a special high-quality multi-grade viscosity oil, which can be used year-round except in extremely cold weather. Changing the engine oil: Like other components of the car, engine oil is constantly evolving. Volkswagen authorized dealers are up-to-date with the latest developments and technical data regarding automotive fluids. It is recommended to have the engine oil changed by a Volkswagen authorized dealer.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.