How Does the Camry Hybrid Version Work?

What is the actual fuel consumption of the Xingrui?

The comprehensive fuel consumption of the Xingrui is 6.7L/100km. There are currently 6 models of the Xingrui on sale: Elite, Luxury, Luxury+, Time-Space Edition Haoyue, Premium, Flagship, and Time-Space Edition Xingchen, all with a comprehensive fuel consumption of 6.7L/100km. The above figures are based on the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 6.7-9.0L/100km. Specific factors affecting a car's fuel consumption are as follows: Car weight: Larger and heavier cars tend to consume more fuel. Generally, a small family car with a 1.6L engine and a weight of about 1.2 tons has a fuel consumption of approximately 7.5 liters (calculated under full load), while an SUV weighing about 1.5 tons consumes around 8.5 liters. Different weights result in varying fuel consumption. Drag coefficient: Higher drag increases fuel consumption during driving. Cars with better aerodynamics have lower drag coefficients, leading to lower fuel consumption. Economical RPM: During driving, the engine has an optimal torque output point where fuel consumption is minimized. Generally, small-displacement cars reach this point at around 70 km/h, while larger-displacement cars achieve it at about 100 km/h. Maintaining speed within this economical RPM range ensures the least fuel consumption. Driving style: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before stopping at traffic lights can increase fuel consumption.

11

2

Share

Can I Take Subject Two Before Subject One?

After completing Subject One of the driver's license test, you cannot directly proceed to Subject Four. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the examination sequence must follow Subject One, Subject Two, and Subject Three in order. Only after passing the previous subject can you proceed to the next one. After passing the road driving skills test of Subject Three, you are eligible to take the safe and civilized driving knowledge test. The driving test consists of three subjects: Subject One, Subject Two, and Subject Three, with Subject Three divided into two parts. Subject Four is the colloquial term for the safe and civilized driving knowledge test under Subject Three and is not a separate subject. Subject One refers to the test on road traffic safety laws, regulations, and related knowledge; Subject Two refers to the field driving skills test; and Subject Three includes the road driving skills test and the safe and civilized driving knowledge test. The safe and civilized driving knowledge test is conducted after Subject Three. Each subject can be taken once, and if you fail, you can retake it once. If you do not attend the retest or fail the retest, the current test session ends, and you must reschedule the test. However, for Subject Two and Subject Three, rescheduling must be done at least ten days later. If you fail the safe and civilized driving knowledge test of Subject Three, the previously passed road driving skills test results remain valid. During the validity period of the driving skills test permit, the number of rescheduled tests for Subject Two and the road driving skills test of Subject Three cannot exceed five times. If you fail the fifth rescheduled test, the results of other previously passed subjects will become invalid. Notes for Subject Four Test: Test Duration: The test lasts 30 minutes. If you make 12 mistakes (6 questions) during the test, the session will be terminated. Number of Questions: Depending on the type of driver's license, 50 questions are randomly selected from the corresponding Subject Four test bank. For car licenses, questions are selected from a pool of 800, while for large vehicle licenses, they are selected from 1,023 questions, with each question worth 2 points. Question Types: The test includes single-choice questions (including true/false questions) and multiple-choice questions. The first 45 questions are single-choice, and the last 5 are multiple-choice. The test also includes animated questions, image-based questions, scenario recognition questions, and text-based questions. Retest Notes: If you fail Subject Four, you only need to retake Subject Four. The driving school will schedule the retest, and there is no limit to the number of retakes. You can retake the test until you pass, and no additional fees are required for Subject Four retests. Subject Four Test Tips: Strengthen Weak Areas and Identify Mistakes: For marked questions, do not just memorize the correct answers. Instead, refer to regulations, textbooks, or reference materials to understand the reasons for the mistakes and internalize them. Categorize and Summarize Questions: Refer to the test bank analysis to categorize questions and identify similar ones. Many questions in the bank are similar and easily confused, so it's helpful to analyze them together. For example, traffic signs for walking, hiking, pedestrian crossings, and pedestrian warnings are visually similar and can be confusing. Grouping them during study can reduce errors. Use Memory Techniques: Many questions in the bank involve numbers. Summarizing these numbers can make them easier to remember.

10

4

Share

Is Running a Red Light Illegal or a Traffic Violation?

Strictly speaking, running a red light is an illegal act. It refers to the behavior of a motor vehicle violating the prohibition of passage during the red light phase at a signal-controlled intersection or road section, crossing the stop line and continuing to drive. According to Article 2, Section 1, Clause 2 of the 'Scoring Standards for Road Traffic Safety Violations,' driving a motor vehicle in violation of traffic signal lights will result in a 6-point penalty per offense. Running a red light means a motor vehicle violates the prohibition of passage during the red light phase at a signal-controlled intersection or road section, crosses the stop line, and continues to drive. According to Article 26 of the 'Road Traffic Safety Law': Traffic signal lights consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to pass, and a yellow light serves as a warning. Article 44 states: Motor vehicles passing through intersections shall proceed according to traffic signal lights, traffic signs, traffic markings, or the direction of traffic police. Here are some tips to avoid running a red light: First look at the arrow light, then the circular light: Currently, there are two types of indicator lights: arrow traffic lights and circular indicator traffic lights. When arrow lights are present, first observe the arrow light and then the circular light to avoid running a red light. Note: When encountering a circular red light, you can turn right; when encountering an arrow signal light where the right-turn arrow is red, you cannot turn right, otherwise, it will be penalized as running a red light. Brake in time: When the red light turns on, do not let the front of the vehicle cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, the electronic camera will capture it, and it will be penalized as running a red light. If the front wheels have just crossed the stop line when the signal turns red, passage through the intersection is prohibited; wait for the green light before proceeding. Check the green light countdown before proceeding: When the green light flashes, if there is a countdown, judge accordingly; if there is no countdown, and the vehicle is close to the intersection with high speed, you may proceed to avoid running a red light due to untimely braking. If the speed is low and the vehicle is far from the intersection, brake immediately to stop and avoid running a red light. Article 38 of the 'Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China' states regarding motor vehicle signal lights and non-motor vehicle signal lights: When the green light is on, vehicles are permitted to pass, but turning vehicles must not hinder the passage of straight-going vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to pass. When the red light is on, vehicles are prohibited from passing. At intersections without non-motor vehicle signal lights or pedestrian crossing signal lights, non-motor vehicles and pedestrians shall follow the motor vehicle signal lights. When the red light is on, right-turning vehicles may pass if they do not hinder the passage of other vehicles or pedestrians. Running a red light is not considered illegal under the following circumstances: Yielding to special vehicles: Yielding to ambulances, fire trucks, and other special vehicles. If captured by surveillance cameras while yielding to special vehicles, manual review will not record the act of running a red light. Even if recorded, you can apply for reconsideration at the traffic police department. Extreme weather: When visibility is so low that even electronic police cannot clearly see the traffic lights. The photos of the violation may be blurry, and if you mistakenly run a red light, the traffic police will not impose penalties. Emergency situations: When rushing a critically ill patient to the hospital, you may run multiple red lights, and 12 points may not be enough. After delivering the patient, provide proof from the hospital or the rescued person to the traffic police for verification. If confirmed, the violation record can be cleared. If possible, it's best to call an ambulance to avoid accidents caused by running red lights. Traffic police direction: During rush hours, traffic police may temporarily direct traffic at important intersections. Drivers should follow the gestures of the traffic police.

7

5

Share

Correct Starting Procedure for Honda URV?

V standard configuration comes with a keyless start system. The owner only needs to press the brake pedal and then push the one-touch start button to ignite the engine. Step on the accelerator pedal to start driving normally.

5

2

Share

Differences Between AT, CVT, and DCT?

dct, cvt, and at differ in structure and transmission methods. The specific details are as follows: Different structures: CVT is a continuously variable transmission; DCT is a dual-clutch transmission; AT is a torque converter transmission, which is an automatic transmission with gears. DCT is a stepped transmission, a dual-clutch transmission designed to reduce shift shock. CVT is more mature compared to DCT, but its transmission method limits the maximum torque capacity, making it mostly used in small-displacement vehicles. Different transmission methods: CVT uses a steel belt for transmission, while the DCT transmission has two automatically controlled clutches for operation. AT relies entirely on hydraulic torque conversion, i.e., hydraulic oil, to connect front and rear power. Because the AT transmission has a torque converter, a hydraulic buffer speed control device, it can easily achieve smooth starts and seamless creeping. DCT, on the other hand, uses dual clutches to achieve gear shifting and torque conversion, resulting in faster response during upshifts. It pairs well with engines that offer more precise torque output, as it has low tolerance for torque errors. AT features: Smoothness, driving pleasure, stable quality, compact size, and a wide transmission range; however, it has a complex structure, high cost, and is difficult to manufacture mechanically. Generally, its efficiency is relatively lower compared to DCT. DCT features: Nearly all the functionalities of AT, excellent driving pleasure, moderate cost, challenging control, direct power delivery, and higher efficiency; however, its low-speed smoothness is slightly worse than AT, and it is relatively bulky. CVT features: Affordable, very smooth, compact size, and simple structure; however, its gear ratio range is limited, fuel efficiency is only theoretical (as a more powerful hydraulic pump offsets CVT's theoretical fuel-saving advantage), and it has low torque-bearing capacity. DCT is also called a dual-clutch transmission. Its structure is similar to a manual transmission but has two sets of clutches. These two clutches control odd and even gears, respectively. DCT offers fast gear shifts, high transmission efficiency, and works well with certain small-displacement turbocharged engines. CVT transmissions are often used in some domestic or Japanese cars. They are compact, lightweight, and cost-effective. Most cars equipped with CVT transmissions are quite fuel-efficient. CVT transmissions have no shift shock, offering excellent smoothness. AMT is the earliest automatic transmission. Its structure is similar to a manual transmission but includes a control mechanism that operates the clutch and gear shifts. AT transmissions have minimal shift shock. DCT transmissions exhibit noticeable shift shock at low speeds, while AMT transmissions have significant shift shock and have been phased out. The R&D and manufacturing costs of AT transmissions are generally high, and they are often used in high-end vehicles. A manual-automatic transmission (Tiptronic) combines manual and automatic shifting functions. This technology was developed to improve the fuel efficiency and drivability of automatic transmissions, allowing drivers to manually override the computer-determined shift timing for better control and a richer driving experience. A manual-automatic transmission integrates manual and automatic shifting. It combines the advantages of both transmissions, minimizing power loss in the shifting system. Unlike a pure manual transmission, which requires the driver to operate the clutch, a manual-automatic transmission features an automatic clutch mechanism. When using the manual mode, drivers only need to shift into manual mode and adjust gears up or down based on speed. If the speed does not match the selected gear, the transmission will automatically downshift; if the speed exceeds the gear, the driver must manually upshift. Working principle: Structurally, a manual-automatic transmission mainly consists of a standard gearbox (similar to a manual transmission), an electronically controlled clutch, an automatic shift mechanism, and an electronic control unit. The electronically controlled clutch automatically engages, disengages, or partially engages the clutch as needed, controlled by the transmission ECU via a stepper motor that moves the clutch fork. The automatic shift mechanism engages the appropriate gear as required, typically using two stepper motors controlled by the transmission ECU. The gear lever setup resembles that of a conventional automatic transmission, with no clutch pedal. Essentially, the transmission uses automated controls to simulate manual shifting. During normal driving, it operates similarly to a hydraulic automatic transmission, except that the clutch disengages when the vehicle is stationary. Therefore, if parked on a slope, the driver must use the brake to prevent rolling. In manual mode, the driving experience mimics that of a manual transmission, with direct power delivery, no need to press a clutch pedal, and the ability to skip gears when shifting up or down.

16

2

Share

How to Handle a Traffic Accident Involving an Uninsured Vehicle?

Uninsured parties must bear the compensation within the liability limit themselves. If the vehicle administrator fails to insure the motor vehicle with compulsory third-party liability insurance as required by the state, the vehicle will be detained by the traffic management department of the public security authority. A fine of twice the minimum liability limit insurance premium will also be imposed as stipulated.

19

3

Share

How Does the Camry Hybrid Version Work?

What is the actual fuel consumption of the Xingrui?

Can I Take Subject Two Before Subject One?

Is Running a Red Light Illegal or a Traffic Violation?

Correct Starting Procedure for Honda URV?

Differences Between AT, CVT, and DCT?

How to Handle a Traffic Accident Involving an Uninsured Vehicle?

What is the typical turning radius for a small car in meters?

What are the functions of each dashboard icon on the JAC Refine S3?

Are There True or False Questions in Subject One?

Does the Tharu consume engine oil?