How Does a Car Wiper Work?

What are the main contents tested in the night driving test?

The night driving test mainly examines the car starting and the use of car lights. The night test mainly checks whether the student can turn on the lights correctly. Students are primarily tested on their driving skills at night and their proficiency in using car lights. More details are as follows: 1. First, the night driving test requires starting the vehicle, turning on the lights, and paying attention to the turn signals before the vehicle starts. During driving, pay attention to the reasonable use of low beams and high beams: (1) When meeting another vehicle, you must use low beams when the distance is about 150 meters; (2) When following the vehicle in front, you must use low beams; (3) When overtaking, you must turn on the turn signal and also use the high-low beam switch to alert the vehicle in front; (4) When passing through an intersection, you must use the high-low beam switch to alert vehicles on both sides of the intersection. (5) Secondly, when driving at night, do not use fog lights unless there is fog or heavy rain. 2. During the night driving test, pay attention to speed control. Generally, the speed should be lower than the maximum speed limit of the road. When meeting another vehicle, pay attention to stabilizing the direction of the vehicle, do not lean too much to the right, and watch out for pedestrians or vehicles on the right. At night, the road appears whiter than other areas, so pay attention to clearly seeing road signs. When passing bridges, going uphill, or downhill, be able to correctly estimate the vehicle's driving position.

3

4

Share

What is the difference between tire 65 and 60?

The differences between tire 65 and 60 are as follows: 1. Aspect ratio: Tire 65 has a higher aspect ratio, while tire 60 has a lower aspect ratio compared to tire 65. Tires with a higher aspect ratio have longer sidewalls, providing better cushioning and relatively higher comfort, but they offer poorer road feedback and weaker lateral resistance during turns. Conversely, tires with a lower aspect ratio and larger inner diameter have shorter sidewalls and wider treads, resulting in a larger contact area. These tires can withstand greater pressure, offer very sensitive road feedback, strong lateral resistance during turns, and better vehicle handling. 2. Fuel efficiency: A smaller contact area leads to better fuel efficiency. Tire 65 has a smaller contact area than tire 60, making it more fuel-efficient. However, a larger contact area increases resistance, improving braking performance.

13

2

Share

How to Solve the Motor Fault of Mercedes-Benz C260L?

Mercedes-Benz C260L displaying a 48-volt motor fault may be due to damaged electrical equipment, faulty or poor contact in the circuit control switch, damaged circuit protection devices, poor circuit grounding, or damaged circuit wires. The specific issue needs to be identified based on the symptoms for troubleshooting and repair. Alternatively, the vehicle can be handed over to professionals for inspection and repair. Below is an introduction to the Mercedes-Benz C260L: 1. The front suspension of the Mercedes-Benz C260L is a multi-link independent suspension, and the rear suspension is also a multi-link independent suspension; 2. The Mercedes-Benz C260L is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 156 PS, a maximum torque of 250 Nm, and a maximum power of 115 kW, paired with a 9-speed automatic manual transmission.

1

Share

Does keeping the ECTPWR mode on have any impact?

Keeping the ECTPWR mode on does have an impact on the car. The specific effects are as follows: 1. ECTPWR is equivalent to the car's S gear or sport mode. Pressing this button will change the engine's operating mode, and the transmission's shift logic will also be altered. In this mode, the car will have stronger power, and the throttle pedal will be more responsive. However, continuous use of this mode will increase fuel consumption and accelerate engine wear. 2. Compared to the normal mode, the sport mode offers better power performance, providing the car with stronger acceleration. Therefore, the ECT mode is more suitable for overtaking or aggressive driving, such as on highways. Using it in urban areas can pose significant safety risks.

5

2

Share

How to eliminate the TC slash yellow light displayed on a Buick?

When a Buick displays a TC slash yellow light, it indicates that the vehicle's traction control system is either turned off or malfunctioning. The solution is to turn on the traction control system. If the system cannot be activated, it is necessary to inspect the traction control system's sensors or the vehicle's onboard computer to identify and resolve the issue, thereby eliminating the warning light. The following are common causes for the TC light to illuminate: 1. Solenoid valve malfunction; 2. Dirty engine oil clogging the solenoid valve filter; 3. Wear on the actuator gear and impeller leading to oil pressure leakage and triggering the alarm; 4. Dirty throttle body with an opening reaching 20%, causing the engine computer to mistakenly diagnose a TC fault.

19

5

Share

What are the differences between China 3 and China 4 motorcycles?

China 3 and China 4 motorcycles mainly differ in their exhaust emission standards. Both China 3 and China 4 refer to emission standards, with China 4 imposing stricter requirements on the content of harmful gases in exhaust emissions, demanding fewer pollutants. However, the China 4 standard has not yet been officially announced. Currently, motorcycles in the market adhere to the China 3 standard, and it is expected that the China 4 standard may be implemented around 2017-2018, potentially phasing out carburetors entirely and adopting electronic fuel injection technology. More details are as follows: 1. To achieve the China 3 emission standard, the best approach is to switch the motorcycle's fuel supply system to electronic fuel injection (EFI). However, due to the relatively backward motorcycle manufacturing technology in China and the immature EFI system production technology, only joint-venture brand models have performed relatively well in this regard. Additionally, compared to carburetors, EFI motorcycles are significantly more expensive. Therefore, in the current domestic motorcycle market, China 3 models mostly still use carburetor fuel supply systems. 2. The China 4 emission standard for motorcycles is even more challenging to meet than China 3, requiring higher manufacturing technology. Once the China 4 standard is fully implemented, all newly produced motorcycles will need to comply with the latest China 4 standard to be allowed for production and sale. By then, carburetor motorcycles will essentially be phased out, and electronic fuel injection technology will be universally adopted.

11

4

Share

How Does a Car Wiper Work?

What are the main contents tested in the night driving test?

What is the difference between tire 65 and 60?

How to Solve the Motor Fault of Mercedes-Benz C260L?

Does keeping the ECTPWR mode on have any impact?

How to eliminate the TC slash yellow light displayed on a Buick?

What are the differences between China 3 and China 4 motorcycles?

How to Set the Horn Sound When Locking the RAV4?

How to Drive an Automatic Transmission Car in Stop-and-Go Traffic on an Uphill?

What is Gaohe?

How much fuel does a car consume when idling for one hour?