How do small dents on car doors occur?

1 Answers
LaPeter
07/29/25 7:25pm
Small dents are caused by pebbles hitting the door while driving. If the dents on the car body are not large and you have strong DIY skills, you can purchase a car dent repair kit to fix them. Traditional treatment methods such as panel beating can also be used. Panel beating is generally not something car owners can do on their own and usually requires a visit to an auto repair shop.
Was this review help?
19
5
Share
More Forum Discussions

What happens if the clutch clearance is too large?

Excessive clutch clearance can result in incomplete clutch disengagement, leading to difficulty in gear shifting. Below are specific details about the clutch: 1. Standard: The standard value for clutch free clearance is generally 0.5-2.0mm. 2. Introduction: Clutch clearance refers to the gap between the front and rear end faces of the driven disc and the surfaces of the flywheel and pressure plate after clutch disengagement. The clutch pedal free travel refers to the pedal travel from when the clutch pedal is depressed until the free clearance is eliminated. 3. Location: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission.
19
4
Share

What to Do If You Violate Traffic Rules Due to Road Water Accumulation?

Three types of traffic violations caused by severe weather conditions will be exempt from penalties: 1. Borrowing lanes: Driving in a bus lane due to water accumulation. 2. Detouring: Entering a no-entry zone due to detouring around waterlogged sections. 3. Changing lanes: Changing lanes due to waterlogged sections, violating prohibitory or directional signs and markings. Additional information: 1. Before entering water: Observe the depth, flow direction, and speed of the water, and check for obstacles like mud or quicksand underwater. 2. While in water: For hard surfaces, engage a low gear and slowly enter the water. Keep the steering wheel steady, maintain a stable throttle to ensure sufficient and consistent power, and try to pass through in one go, avoiding stopping midway.
12
3
Share

How to Paint Aluminum Alloy?

Aluminum alloy surfaces require the use of specialized primer to ensure adhesion. Here are some precautions regarding automotive painting: 1. Paint smoothness: Some car owners may experience uneven paint surfaces after bodywork and painting due to poor-quality repair shops, along with potential paint defects like pinholes and impurities. In severe cases, paint runs may occur. Therefore, it is recommended that car owners choose reputable 4S shops or repair facilities for painting. 2. Avoid contact with other substances: For freshly painted cars, it is best not to wash the vehicle before the paint has fully dried. Additionally, avoid driving in rainy weather to prevent watermarks on the paint. Furthermore, keep the paint away from chemicals, grease, or other substances that could damage the automotive paint surface.
18
5
Share

Why is it easier to shift gears when the car is cold but harder when it's hot?

Cold car easy to shift gears but hot car difficult to shift is caused by the deterioration of clutch pressure plate performance resulting in incomplete separation. Here are specific details about the clutch pressure plate: 1. Structure: The clutch pressure plate has friction linings, similar to brake pads on wheels, made of highly wear-resistant asbestos and copper wires. The friction linings on the pressure plate also have a minimum allowable thickness. After long mileage, the friction linings on the pressure plate need to be replaced. 2. Precautions: Do not half-press the clutch pedal, as this puts the clutch disc in a semi-engaged state. If the clutch pedal is fully depressed, the flywheel and clutch pressure plate are completely separated with no friction between them. If the clutch pedal is fully released, the flywheel and clutch pressure plate are fully engaged, with minimal friction. Therefore, the clutch pedal should not be kept in a half-pressed state.
10
0
Share

What is the general diameter of a tire in centimeters?

The diameter of a tire generally ranges from 750 to 850 centimeters. Here are the specific details: 1. Parameter Identification: In addition to the production date, the sidewall of a tire will have markings such as 185/55R15-86V, which correspond to the tire width, aspect ratio, tire type, rim diameter, load index, and speed rating. 2. Tire Replacement: The need for tire replacement can be determined based on the usage and condition of the tire. When cracks, bulges appear on the tire surface, or the tread pattern is worn flat, it is necessary to replace the tire promptly. A tire bulge is caused by impact damage that breaks the internal metal wires of the tire, leading to a bulge. Continuing to drive at high speeds or over long distances with such damage can easily result in a tire blowout and cause an accident.
11
0
Share

Do you need a cushion for driving practice if you are 1.5 meters tall?

Using a cushion for driving practice when you are 1.5 meters tall can improve your driving visibility. Here are some specific tips for driving practice: 1. Clothing: Generally, it is not recommended to wear long skirts during driving practice as they can easily get caught on the clutch or brake pedals, posing safety risks. It is advisable to wear cloth shoes or flat shoes for better control over the accelerator, brake, and clutch pedals, making it easier to master the key points of pedal operation. 2. Exam precautions: Wearing slippers, high heels, or colored sunglasses is not allowed. There is no explicit rule against wearing skirts, but for safety reasons, it is not recommended to wear long skirts during the exam. Dress as you normally would for practice and approach the exam with the same mindset as your regular practice sessions, avoiding excessive nervousness.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.