How Do Cars Prevent Theft?

1 Answers
LaMila
07/30/25 1:18am
Cars need to purchase auto theft insurance for theft prevention. Detailed information is introduced as follows: 1. Purchase auto theft insurance: As the saying goes, prevention is better than cure. Car owners can add a "theft insurance" clause to their insurance policy. From a long-term perspective, this can save you time and money, and spare you a lot of trouble. 2. Pull the car door when locking: Most car owners like to press the remote lock after getting out of the car, thinking it's cool. Little do they know, this leaves a great opportunity for thieves. 3. Choose a parking place with dedicated personnel: Thieves usually choose unattended places to act. Therefore, when parking, car owners should try to avoid dimly lit or sparsely populated areas and choose open terrain instead. 4. Try not to leave any items in the car, especially valuables. If you must leave something in the car, be sure to place it where it cannot be seen from the outside.
Was this review help?
15
0
Share
More Forum Discussions

How Often Should Chassis Maintenance Be Performed?

Primary Maintenance (approximately 5,000 kilometers): This involves tightening and lubrication-centered maintenance tasks for vehicles that have traveled a certain mileage. Secondary Maintenance (approximately 10,000 kilometers): This refers to inspection and adjustment-centered maintenance tasks for vehicles that have traveled a certain mileage. The scope of maintenance includes, in addition to the tasks of primary maintenance, inspecting and adjusting the working condition of the engine and electrical equipment, dismantling and cleaning the oil pan and oil filter, inspecting and adjusting the steering and braking mechanisms, dismantling and cleaning the front and rear wheel hub bearings, adding lubricating oil, dismantling and inspecting tires, and performing tire rotation. The purpose is to maintain the good working performance of all vehicle components, mechanisms, and assemblies, ensuring their normal operation between two secondary maintenance intervals. Tertiary Maintenance (approximately 20,000 kilometers): This involves disassembly, cleaning, inspection, adjustment, and elimination of hidden hazards as the core maintenance tasks for vehicles. The scope of maintenance includes, in addition to all tasks of primary and secondary maintenance, dismantling and inspecting the engine to remove carbon deposits, gum deposits, and cooling system contaminants; dismantling, cleaning, inspecting, adjusting, and eliminating hidden hazards for chassis assemblies as needed; and inspecting or derusting and repainting the frame and body. The purpose is to consolidate the normal performance of all assemblies and components, ensuring their proper operation.
15
2
Share

What does the knob on the wiper switch mean?

The knob on the wiper switch is generally used when the wiper switch is turned to the first gear. The wiper switch is usually located at the lower right of the steering wheel, with 'off' indicating that the wiper is in the closed state. Lifting it upwards once will make the wiper automatically return to its position, and the wiper will work once automatically. Pushing it down once is for intermittent operation, twice for low-speed continuous wiping, and three times for high-speed operation. Pushing it all the way up will return it to the off state. If none of these three gears provide the desired intermittent speed, you can adjust the desired intermittent speed by rotating the middle knob. The knob on the far side is the switch for the rear wiper. Turning it once is for low-speed operation, and twice is for high-speed. Lifting the entire wiper lever upwards sprays water on the front windshield, while pressing it down sprays water on the rear windshield. The toggle switch on the front of the wiper allows for fine-tuning the speed on the existing settings, which can be adjusted as needed. When operating the wiper washer, please note the following precautions: Do not use the washer when the washer reservoir is empty to avoid burning out the washer motor. Do not use the washer continuously for a long time. One or two seconds per spray is sufficient to avoid burning out the washer motor. In northern regions, before winter arrives, empty the washer reservoir and refill it with antifreeze washer fluid. In winter, do not operate the wiper or washer when the wiper blades are frozen to the windshield to avoid burning out the wiper motor. Do not operate the wiper on a dry windshield (when it's not raining). If the windshield is dirty, use the washer to lubricate it first before wiping.
10
1
Share

Can the ETC card be removed when not in use in the car?

The ETC card can be removed, but the ETC device will not function without it. According to the "Rules for the Use of the Non-Stop Rapid Passage System," the ETC card must be inserted into the OBU device for normal operation; otherwise, user information cannot be read. If the card is removed, you can use the manual lane and have the staff swipe the card. When the ETC card is inserted into the OBU device, a prompt sound will indicate that the device is activated. Without the card, the device remains in a dormant state and cannot recognize vehicle information at toll stations, so removing the card disables the ETC function. ETC is an electronic toll collection system, also known as an automatic road toll system. It is specifically designed for toll roads, commonly found on highways, toll bridges or tunnels, and certain urban sections to alleviate traffic congestion. ETC billing principle: Highways have one or more ETC lanes. Through dedicated short-range microwave communication between the vehicle's windshield-mounted electronic tag and the microwave antenna in the ETC lane, computer networking technology is used for backend settlement with banks. This allows vehicles to pass toll stations without stopping to pay road or bridge fees, all based on the principle of "pass first, deduct later." Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in queues. Green and eco-friendly: Reduces noise and exhaust emissions by avoiding stops at toll stations. Reduced wear and tear: Saves costs by minimizing frequent starts and stops, lowering vehicle wear and fuel consumption. Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC faster, more advanced, and higher-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council's "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" explicitly states the goal of "achieving interoperability of transportation cards in key urban clusters by 2020 and significantly increasing the proportion of vehicles equipped with ETC." It also sets a target of "50% ETC usage rate for road passenger vehicles by 2020" in the main indicators of the "13th Five-Year" comprehensive transportation development plan. Future possibilities: In addition to continuously improving the convenience of ETC installation and usage rates for passenger vehicles, future efforts will promote ETC adoption for trucks and explore deeper integration of ETC systems with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and other smart transportation developments. This will provide comprehensive travel services for vehicle owners, meaning more application scenarios will support ETC usage.
9
2
Share

What transmission does the Volkswagen Teramont use?

Volkswagen Teramont uses a 7-speed wet dual-clutch transmission. The following are the advantages and disadvantages of dual-clutch transmissions: Advantages: 1. Seamless gear shifting with minimal power loss, resulting in reduced fuel consumption. 2. Fast gear shifting speed and high transmission efficiency. 3. Capable of handling high torque with good reliability and stability. Disadvantages: 1. Insufficient torque at low speeds. 2. Increased likelihood of faults due to the use of numerous electronic components.
3
3
Share

How to Reset the Car Screen to Factory Settings?

Hold down the display adjustment button for 10 seconds to reset the car screen to factory settings. Here is more information about car screens: 1. Location: They can be installed near the dashboard, on the roof, behind the seat backs, or even on the sun visor for convenient use in various situations. 2. Features: Car display devices are typically LCD screens with external speakers, capable of reading SD cards, USB, and Bluetooth functions. Additionally, car display devices often integrate other features, such as simple amplifiers, TV reception, audio output, etc., offering more variety and functionality than TV or computer monitors.
9
3
Share

What does it mean when a vehicle is not archived?

Vehicle archiving refers to the transfer of ownership of a registered motor vehicle. Below is relevant information about vehicle archiving: 1. Required documents for modifying vehicle records: Identification of the vehicle owner, vehicle registration certificate, vehicle driving license, engine, body or chassis compliance certificate, and motor vehicle safety technical inspection certificate. 2. Required documents for transferring vehicle records: Identification of the vehicle owner, vehicle registration certificate, vehicle driving license, release certificate for motor vehicles under customs supervision, motor vehicle safety technical inspection certificate, and compulsory traffic accident liability insurance certificate.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.