How Can a Beginner Driver Drive on the Highway?

3 Answers
CaydenRose
07/24/25 9:55am
For the first 12 months after obtaining a driver's license, it is considered the probationary period. During this period, if a driver wishes to drive on the highway, they must be accompanied by a driver who has held a valid driver's license for the same or higher vehicle category for at least three years. After one year of obtaining the license, the driver can drive on the highway alone. Here are more tips for driving on the highway: 1. Do not stop on the highway: You should not stop on the highway unless it's an emergency. If you must stop, park in the emergency lane and place a red warning sign about 150 meters behind your vehicle to alert other drivers. 2. Maintain a safe distance: Always keep a sufficient distance from the vehicle in front of you to ensure enough reaction time in case of an accident.
Was this review help?
3
0
Share
Jay
08/11/25 1:57am
When it comes to new drivers getting on the highway, I have to remind you that according to regulations, those who just got their driver's license cannot drive alone on the highway; they must wait at least one year before driving by themselves. I was a newbie too back then, and for the first few months, I had an experienced driver accompany me for practice. We first drove on regular roads for a while to get familiar with city traffic before attempting highway sections. On the highway, speeds are high, so it's crucial to maintain enough distance—don't tailgate. When starting, accelerate gradually, don’t rush to cut in, and check the rearview mirror before changing lanes. Also, make sure your vehicle is in good condition, with proper tire pressure and a functioning brake system. Don’t be too nervous mentally—I was sweating on my first day on the highway, but it gets better with more practice. Choose a clear daytime to set off, avoid rush hours in the morning and evening, prioritize safety, and gradually build experience—that’s the key.
Was this review help?
19
2
Share
Expand All
MacMason
09/25/25 3:17am
For beginners driving on the highway, safety and adaptation are key. Regulations require a driver's license to be held for at least one year before driving alone on the highway; otherwise, a driver with over three years of experience must accompany you. It's advisable to practice on city roads for a few weeks to master basic operations before moving to expressways to get familiar with highway rhythms. For example, when I teach someone to drive, I always emphasize speed control: accelerate steadily at the highway entrance, stay within the speed limit, and avoid reckless speeding. When changing lanes, check blind spots carefully and use turn signals. Vehicle checks cannot be overlooked—confirm tire pressure, lights, and fuel levels. Avoid driving in severe weather, as rain can cause skidding. Build confidence through practice, but always keep your focus on the road—safe driving is fundamental. Start with a few short highway trips before gradually taking on longer journeys.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

What is the method to reset the maintenance light on the JAC Refine S3?

The method to reset the maintenance light on the JAC Refine S3 is: turn off the ignition switch, press and hold the adjustment lever at the lower right of the instrument panel, and then turn on the ignition switch to reset. The functions of the maintenance light are: 1. Record the mileage of important components; 2. Remind the owner to perform maintenance. The JAC Refine S3 is a compact SUV with body dimensions of: length 4345mm, width 1765mm, height 1640mm, wheelbase 2560mm, and a fuel tank capacity of 45L. It is equipped with a 1.5L naturally aspirated engine, with a maximum power of 85kW and a maximum power speed of 6000rpm.
19
1
Share

What colors are available for the Geometry A car?

Geometry A car comes in the following colors: 0° White, 11° Silver, 18° Gold, 26° Blue, and 100° Red. The Geometry A is a pure electric compact car with the following body dimensions: length 4736mm, width 1804mm, height 1503mm, wheelbase 2700mm, and a trunk capacity of 430L. It uses 205/60R16 tires. The car is equipped with a front-mounted ternary lithium battery, with a total motor power of 120kW and a total motor torque of 250Nm. It is paired with a fixed gear ratio transmission and features a MacPherson independent front suspension and a torsion beam non-independent rear suspension.
6
3
Share

How to Set One-Touch Up/Down for the Avalon?

The method to set one-touch up/down for the Avalon is: 1. Start the vehicle, press down or lift the button to the first position, and release when reaching the desired position; 2. Press or lift the button firmly to the second position for automatic rising or descending. The Avalon is a mid-size sedan with body dimensions of length 4975mm, width 1850mm, height 1450mm, a wheelbase of 2870mm, and a fuel tank capacity of 60 liters. It is equipped with a 2.5L naturally aspirated engine, delivering a maximum power of 154kW at 6600rpm and a maximum torque of 250Nm.
2
5
Share

How to Replace Brake Pads with an Electronic Parking Brake?

Electronic parking brake replacement of brake pads method is: 1. Use a jack to lift the front part of the car; 2. Use tools to remove the tire; 3. Unscrew the caliper screws, remove the damaged brake pads and replace them. The electronic parking brake is a technology that achieves parking braking through electronic control. The working principle of the electronic parking brake is: 1. Parking is achieved through the friction clamping between the brake shoe and the brake hub or between the friction plate and the brake disc; 2. The control method replaces the original manual operation and mechanical linkage with electronic buttons and motors. The full name of this system is the electronically controlled mechanical parking brake system.
19
3
Share

Do Automatic Headlights Need to Be Turned Off After the Engine Is Off?

Automatic headlights do not need to be turned off after the engine is off. The method to activate automatic headlights is: adjust the combination switch of the car lights to the auto position. The function of automatic headlights is: when the light becomes dim during driving, the headlights will automatically turn on, and when the light becomes bright, they will automatically turn off. The working principle of automatic headlights is: the photosensitive sensor forms a voltage signal based on changes in external light, which is fed back to the automatic headlight control module. After data analysis, it determines whether the lights should be turned on. The maintenance methods for automatic headlights are: 1. Regularly check the lamp cover to avoid water droplets; 2. Prevent impact from foreign objects.
9
5
Share

How to Adjust the Rearview Mirror of the Tiguan?

The method to adjust the rearview mirror of the Tiguan is: Press the circular button next to the door corresponding to the rearview mirror, then adjust the mirror up, down, left, or right as needed. The functions of the rearview mirror are: 1. To prevent traffic safety accidents and ensure personal safety; 2. To expand the driver's field of vision. The Tiguan is a compact SUV with the following dimensions: length 4506mm, width 1809mm, height 1685mm, wheelbase 2684mm, and a fuel tank capacity of 63 liters. It is equipped with a 1.8T turbocharged engine, with a maximum power of 118kW and a maximum power speed range of 4500 to 6200 rpm.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.