How big is the Outlander's trunk?

What is the fuel consumption of the new Hongqi HS5?

The comprehensive fuel consumption of the new Hongqi HS5 is approximately 10.7 liters per 100 kilometers, which indicates relatively good fuel efficiency for this vehicle. The Hongqi HS5 is equipped with a 2.0-liter turbocharged engine across all variants, delivering a maximum power of 165 kW and a maximum torque of 340 Nm. Factors affecting fuel consumption are as follows: 1. Rough roads increase fuel consumption: Driving on congested or uneven roads for extended periods in lower gears will inevitably increase fuel consumption. 2. Overloading the trunk raises fuel consumption: Using the trunk as a storage space and filling it with unnecessary items increases the vehicle's weight. It's important to note that vehicle weight is directly proportional to fuel consumption. A 10% reduction in vehicle weight can lead to a corresponding percentage decrease in fuel consumption.

13

5

Share

What Causes Abnormal Engine Oil Level?

The main reasons for abnormal engine oil level are: 1. Generally, vehicles consume a certain amount of oil during operation, so it is essential to regularly check the oil level and top up immediately if it is low. 2. If blue smoke is emitted from the exhaust pipe while the engine is running, it is necessary to increase the frequency and quality of inspections to prevent insufficient oil from accelerating engine wear or causing malfunctions. 3. If the oil level is normal but the oil warning light remains on, it indicates an electrical issue or a faulty oil pressure sensor, and the vehicle should be taken to a repair shop. Below is some additional information: 1. Introduction and Functions: Engine oil, also known as engine lubricant, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. It is often referred to as the 'blood' of a car. 2. Composition: Engine oil consists of base oil and additives. The base oil is the primary component, determining the fundamental properties of the lubricant, while additives compensate for and enhance the base oil's performance deficiencies, imparting new characteristics, making them a crucial part of the lubricant.

11

4

Share

What is the fuel consumption of the Envision S?

The Envision S has a fuel consumption of 9.5 liters per 100 kilometers. The Envision S is a mid-size SUV under the Buick brand, equipped with a 2.0-liter turbocharged engine. The engine code for the Envision S's 2.0-liter turbocharged engine is LSY. Relevant information about fuel consumption is as follows: 1. Introduction: Fuel consumption generally refers to constant-speed fuel consumption, which is the vehicle's fuel consumption per 100 kilometers obtained in constant-speed driving fuel consumption tests as specified by national standards for certain types of vehicles. 2. Testing Methods: Tests can be conducted on the road or on a chassis dynamometer, and the fuel consumption per 100 kilometers is then calculated using the "flow meter method" or the "carbon balance method."

9

5

Share

What was the emission standard for cars in 2008?

In 2008, cars had either China II, China III, or China IV emission standards. Below is relevant information about emission standards: 1. Principle: Vehicle emissions refer to harmful gases such as CO, HC+NOx, and PM discharged from exhaust. These are harmful gases produced during the engine's combustion process. For example, CO is an intermediate product of incomplete fuel oxidation and is generated when oxygen is insufficient. High mixture concentration and uneven mixture can increase CO emissions. 2. Countermeasures: Vehicle emission standards are established to control pollutant emissions from cars. To curb the production of these harmful gases, automakers are encouraged to improve their products to reduce the source of these emissions, leading to the formulation of relevant vehicle emission standards.

20

0

Share

How to File an Insurance Claim for a Damaged Rearview Mirror?

If your rearview mirror has been damaged, you can park your car safely and call your insurance company to file a claim, explaining the situation. Here are some considerations when purchasing car insurance: 1. Carefully check the insurance policy: After purchasing car insurance, thoroughly inspect the policy upon receipt. In addition to verifying the information, pay attention to identifying its authenticity. Generally, policies have anti-counterfeiting patterns, relevant wording supervised by the insurance regulatory authority, and annotations of the sales location. 2. Carefully review and verify the insurance documents: When receiving the insurance documents, make sure to carefully check them. Verify whether the third copy of the document is printed on white carbonless paper with a light brown anti-counterfeiting pattern.

7

3

Share

How to Use Hazard Lights in a Car?

When the water level reaches above 20 centimeters, there is a risk of water entering the engine. For ordinary sedans, when the water level exceeds 20 centimeters (for SUVs with higher ground clearance, this threshold increases to 30 centimeters), the risk of engine water ingress arises. Water can enter the engine through two main pathways: 1. Low air intake inlet: Due to the low position of the engine's air intake inlet, water can be sucked into the engine when driving through flooded areas. 2. Exhaust outlet below the waterline: If the exhaust pipe outlet is submerged below the waterline, water can be drawn into the engine through the exhaust. Here is relevant information: 1. Engine stalling is inevitable after water ingress: Since water entering the cylinders lacks lubrication, attempting to restart the engine blindly after stalling may cause severe damage (e.g., cylinder scoring), potentially leading to engine failure. The correct approach is to push the car to a higher, non-flooded area, contact your insurance company, and have the vehicle towed to a repair shop for inspection. 2. Check all fluid systems in the vehicle: After water exposure, fluids may foam or become contaminated, losing their lubricating properties. Additionally, water may carry sand particles, accelerating engine wear. Therefore, prompt cleaning and fluid replacement are necessary. After inspection, thoroughly clean electrical connectors in the engine compartment to prevent corrosion and sand residue. Key areas to clean include the fuse box, sensor connectors, and areas where water may accumulate in the body. Once these components are cleaned, conduct a road test at moderate speeds while carefully listening for abnormal engine noises. If unusual sounds are detected, inspect engine bearings and rotating components again to prevent damage from excessive wear.

13

3

Share

How big is the Outlander's trunk?

What is the fuel consumption of the new Hongqi HS5?

What Causes Abnormal Engine Oil Level?

What is the fuel consumption of the Envision S?

What was the emission standard for cars in 2008?

How to File an Insurance Claim for a Damaged Rearview Mirror?

How to Use Hazard Lights in a Car?

Which company does NETA Auto belong to?

What needs to be replaced during the second maintenance?

What items need to be replaced during the second car maintenance?

Are Car Scratch Repair Tools Really Effective?