How are vehicles violating traffic restrictions penalized?

How to adjust the pneumatic brake?

Pneumatic brake adjustment method: First, locate the adjustment nut on the rear wheel sprocket. Use a 17-19mm hex wrench placed on it and tap it with a small hammer. After adjustment, it will automatically return to position. Generally, turning it clockwise tightens it until it can't be turned further. For the brake caliper, loosen it counterclockwise and tighten it clockwise. When the vehicle is unloaded, use a jack to lift the axle, at which point the wheel can be manually pulled up, and then tighten it. The pneumatic brake, also known as a disc brake, air brake, pneumatic disc brake, or pneumatic-hydraulic brake, is one of the industrial transmission brakes. It uses air pressure to stop or decelerate moving parts in machinery. It features a simple structure, easy installation, durability against pressure, impact, and knocking, and a long service life. Generally, only the brake pads need replacement, which is quick and easy, utilizing magnetic effects.

9

0

Share

Which lane should motorcycles take on the highway?

Motorcycles should drive in the outermost lane of the highway. Speed limit regulations: The speed of a motorcycle must not be lower than 60 km/h and must not exceed 80 km/h. Due to the minimum speed limit, motorcycles with an engine displacement below 50cc are "prohibited from entering." Precautions: When driving a motorcycle on the highway, carrying passengers is not allowed, and helmets must be worn. According to the speed limits set for different lanes on the highway, motorcycles should drive in the outermost lane. Introduction: Highways are classified as high-grade roads, commonly referred to as expressways. According to the "Technical Standards for Highway Engineering" by the Chinese Ministry of Transport, a highway is defined as "a road that can accommodate an average annual daily traffic volume of more than 25,000 passenger cars, is exclusively for high-speed divided-lane driving, and has full access control." Although different countries have different names for highways, they all refer to roads with at least four lanes, bidirectional separated traffic, full access control, and all-grade interchanges. In addition, many countries also refer to direct trunk roads with partial access control and not all-grade interchanges as highways.

10

2

Share

What are the new regulations for off-site annual inspection of motorcycles in 2020?

2020's new regulations for off-site annual inspection of motorcycles stipulate that motorcycle inspections will implement nationwide universal inspection, further liberalizing cross-provincial (autonomous region/municipality) off-site inspections for motorcycles. Below is relevant information about the 2020 new regulations for off-site annual inspection of motorcycles: Main content: For motorcycles registered within 6 years, they will be exempt from inspection at inspection institutions to reduce the inspection burden on the public, especially owners in rural areas. Vehicle owners can apply for an inspection compliance mark at the vehicle management office of the registration location within three months before the expiration of the vehicle's inspection validity period. Before applying, the vehicle owner must resolve all traffic safety violations and accidents related to the vehicle. Legal basis: Article 49 of the "Motor Vehicle Registration Regulations". Vehicle owners can apply for an inspection compliance mark at the vehicle management office of the registration location within three months before the expiration of the vehicle's inspection validity period. Before applying, the vehicle owner must resolve all traffic safety violations and accidents related to the vehicle.

20

2

Share

What is the fuel consumption of the Buick Encore 1.4t?

The fuel consumption of the Buick Encore 1.4t is 7.2L per 100 kilometers. The following is a related introduction about the Buick Encore: 1. Power: The Encore GX is equipped with an Ecotec-1.3T direct-injection turbocharged three-cylinder engine, with a maximum power of 165 horsepower. The transmission system is matched with a CVT continuously variable transmission (front-wheel drive models) and a 9-speed automatic manual transmission (timely four-wheel drive models). 2. Interior: Although the new generation SAIC-GM Buick Encore and Encore GX both use Buick's new generation interior concept, their styles are completely different. The interior of the new generation Encore is simple and elegant, equipped with a floating central control screen, and the floating central control screen stands in the center of the front row with a better viewing angle, which is more in line with the operating habits of young people. The fun and stylish components such as the three-spoke flat-bottom steering wheel, double-barrel instrument panel, and new ball-head design gearshift bring more sporty design elements to the vehicle.

9

4

Share

What Documents Are Needed for the First Maintenance at a 4S Shop?

Items required for the first maintenance include: driver's license; maintenance manual; warranty manual; vehicle owner's ID card; vehicle registration certificate; vehicle purchase invoice. Take these to the designated first maintenance facility for the vehicle's initial service. Important note: Make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after a new car has been driven. The specific timing varies by vehicle, typically occurring after driving 1,000 to 3,000 kilometers. It's crucial to attend the first maintenance on time—neither early nor delayed. Completing the first maintenance signifies the end of the car's break-in period, allowing it to be driven under standard loads and normal speeds as required. The first maintenance timeline is calculated from the date of vehicle pickup, with two indicators: mileage and time. Whichever comes first serves as the standard. Free services during the first maintenance generally include: engine oil change, tightening chassis screws, checking tire pressure, inspecting all vehicle fluids, checking all lights, cleaning the air filter and cabin air filter, engine dust removal, and topping up windshield washer fluid and coolant. Oil change: Pay attention to the oil type and brand, ensuring the oil container is original and unopened. It's advisable to take a photo with your phone for future reference regarding engine performance post-maintenance. Tightening car screws: Many vehicles leave the factory with screws not fully tightened to account for the break-in period. During the first maintenance, after the break-in is mostly complete, the mechanic will tighten all connecting screws to the torque specified in the manual. Tire pressure: Standard tire pressure is around 2.2~2.6 bar. Overinflation increases tire wear and may cause blowouts, while underinflation raises fuel consumption and ride discomfort. Generally, tire pressure can be slightly lower in summer and slightly higher in winter. Fluid inspection: Includes a comprehensive check of engine oil, power steering fluid, transmission fluid, and brake fluid. Light inspection: Covers headlight alignment, brightness, bulb condition, and proper functioning of turn signals, followed by checking the taillights. Air filter and AC check: Assesses AC cooling/heating efficiency and airflow strength. Engine inspection: Focuses on wiring, hoses, chain or belt wear, unusual odors, and oil leaks. Topping up windshield washer fluid and coolant: Windshield washer fluid is specialized glass water that prevents rust and freezing in winter. Time required for first maintenance: Completing all tasks takes about 2 hours. The most critical aspect of the first maintenance is changing the engine oil and oil filter. The oil filter must be replaced alongside the oil, and the oil selection should follow the Vehicle User and Maintenance Manual, as different models require different oil specifications. Maintenance precautions: Avoid washing the interior with water: Many people clean their cars during holidays, including hosing down the interior and wiping it with a cloth. Note that the interior should not be directly washed with water. If floor mats are dirty, use a vacuum or remove them to scrub with detergent, dry, and reinstall. The cabin floor has multiple drainage holes under rubber mats; water entering won't dry but will flow to components like the transmission, causing corrosion. Instead, vacuum and wipe to prevent water accumulation. Do not mix different brands of antifreeze: If the antifreeze level is low, drain it completely and refill with the same brand. Different brands have varying chemical properties, and mixing them may cause corrosion due to incompatible additives. Avoid lubricating wheel bolts and nuts: While lubricating rusty bolts may seem helpful, applying grease to wheel bolts/nuts poses safety risks. At high speeds, lubricated bolts may loosen or detach, leading to driving hazards. No need to press the accelerator when starting fuel-injected cars: Unlike conventional cars, fuel-injected vehicles' control systems automatically adjust fuel supply based on engine temperature and conditions, ensuring smooth starts.

18

5

Share

What does KDSS mean?

KDSS is a dynamic suspension system developed by Toyota. KDSS is an abbreviation, and its full name is: Kinetic-Dynamic Suspension System, which translates to Electronically Controlled Kinetic Suspension System in Chinese. Extended content about KDSS: 1. Composition: Both front and rear stabilizer bars have independent hydraulic cylinders that control vertical movement and are connected by a hydraulic system. Each stabilizer bar's hydraulic cylinder is divided into upper and lower chambers. The front upper and lower hydraulic chambers are connected to the rear upper and lower hydraulic chambers via their respective hydraulic lines. Each hydraulic line contains an accumulator. KDSS controls a set of valves connected to the accumulators in the hydraulic lines to keep each stabilizer bar in optimal condition. 2. Performance Description: KDSS Normal Mode: When the vehicle is in a turning state, the outer suspensions of both front and rear wheels are compressed, and the inner suspensions are extended. This causes the stabilizer bars to twist, resisting body roll. The two hydraulic lines between the connected hydraulic pumps have no fluid flow, functioning like a conventional suspension but with improved anti-roll capability. In KDSS Off-Road Mode: When one of the four wheels encounters an obstacle and is lifted, the suspension of the lifted wheel is compressed, and the stabilizer bar and hydraulic pump rise together. Fluid flows between the two hydraulic lines connecting the front and rear pumps, absorbing the stabilizer bar's twist. Since the stabilizer bar does not twist, the suspension travel is greater than that of a conventional suspension, and it can adjust according to different road conditions.

12

2

Share

How are vehicles violating traffic restrictions penalized?

How to adjust the pneumatic brake?

Which lane should motorcycles take on the highway?

What are the new regulations for off-site annual inspection of motorcycles in 2020?

What is the fuel consumption of the Buick Encore 1.4t?

What Documents Are Needed for the First Maintenance at a 4S Shop?

What does KDSS mean?

What Documents Are Needed for Motorcycle Transfer and Registration in Another Location?

Can motorcycles commit traffic violations?

What does a triangular exclamation mark on a sedan's dashboard mean?

Do motorcycles have temporary license plates?