How are demerit points deducted when combining C1 and E licenses?

What is the top speed of the Kawasaki H2R?

The theoretical top speed of the Kawasaki H2R is 420 km/h at 16,000 rpm; currently, it achieves 400 km/h at 14,500 rpm. Below is some relevant information about the Kawasaki H2R: 1. Working Principle: (1) Intake: At this stage, the intake valve opens, the piston moves downward, and the mixture of gasoline and air is drawn into the cylinder. (2) Compression: At this stage, both the intake and exhaust valves are closed, the piston moves upward, and the mixture is compressed. 2. Notes: The H2R is a pure racing motorcycle and cannot be driven on public roads; it is only suitable for track use. From a technical perspective, the wheelbase, though minimized, is still considered long. Most importantly, the 300 crankshaft horsepower needs to be linearized to suit corner exits on the track. Unless Kawasaki completely disables the supercharger mode, reducing the horsepower back to the naturally aspirated 200, developing a supercharged power electronic control system at a civilian price point would be challenging.

11

3

Share

How many kilometers can 3 liters of oil run?

It depends on the specific car and its fuel consumption. For example, if a car consumes 9L per 100 kilometers, 3L of fuel can roughly run about 33 kilometers. There are three methods to reduce vehicle fuel consumption: 1. Minimize the vehicle weight: Keep the interior simple and avoid carrying unnecessary items; 2. Avoid excessive modifications: Adding spoilers, protective covers, or wings may disrupt the original aerodynamic design; 3. Develop good driving habits: Avoid sudden acceleration and high-speed driving in low gears. 12533L of fuel can run 250 kilometers. There are three methods to reduce vehicle fuel consumption: 1. Minimize the vehicle weight: Keep the interior simple and avoid carrying unnecessary items, as every additional 1kg of load increases fuel consumption by 1%; 2. Avoid excessive modifications: Adding spoilers, protective covers, or wings may disrupt the original aerodynamic design, increasing wind resistance and consuming extra fuel. Modifying lights increases electricity usage, leading to unnecessary fuel consumption; 3. Develop good driving habits: Avoid sudden acceleration, high-speed driving in low gears, prolonged idling, frequent lane changes, or braking. Aim for smooth starts, steady-speed driving, and reduced braking.

1

5

Share

What is the difference between Audi A4L40 and Audi A4L45?

The differences between Audi A4L40 and Audi A4L45 are as follows: 1. Difference in power and maximum torque: The difference between Audi A4L40 and Audi A4L45 lies in their power and maximum torque. The A4L40 is a 2.0T low-power version with a maximum horsepower of 190P and a maximum torque of 320Nm, while the A4L45 is a 2.0T high-power version with a maximum horsepower of 252P and a maximum torque of 370Nm. 2. Different starting speeds: The most noticeable difference in starting speeds is the acceleration time. The A4L40's acceleration time is around 7 seconds, while the A4L45's acceleration time is around 6 seconds, with a difference of approximately one second in the 0-100KM acceleration time. 3. Different prices: Since the Audi A4L45 has better power and performance than the A4L40, the price of the Audi A4L45 is relatively higher, and it is also more popular among high-income groups.

10

4

Share

What is the distance for pulling over in Subject 3?

In the Subject 3 driving test, the effective distance for pulling over is 30cm. After parking, if the distance between the vehicle body and the right edge of the road or the curb exceeds 30cm, 10 points will be deducted. The penalty standards for pulling over are as follows: 1. Before parking, failing to observe the traffic conditions behind and to the right through the interior and exterior rearview mirrors: deduct 100 points; 2. After the examiner issues the command to pull over, failing to park within the specified distance: deduct 100 points; 3. After parking, the vehicle body exceeds the right edge of the road or the curb: deduct 100 points; 4. After parking, failing to turn the head to observe the side and rear traffic conditions before opening the door: deduct 100 points; 5. Failing to close the door after getting out of the vehicle: deduct 100 points; 6. After parking, the distance between the vehicle body and the right edge of the road or the curb exceeds 30cm: deduct 10 points; 7. After parking, failing to engage the parking brake tightly: deduct 10 points; 8. Releasing the foot brake pedal before engaging the parking brake tightly: deduct 10 points; 9. Failing to turn off the engine before getting out of the vehicle: deduct 5 points.

13

1

Share

What does 'maximum' mean on tires?

Maximum tires are produced by the Giti brand, which supplies tires for vehicles such as General Motors, Volkswagen, Peugeot Citroën, Fiat, and Volvo. Below is additional information: 1. Brand Portfolio: Giti Tire owns multiple brands including Giti, GT, Duntlop, Hualin, Greatwall, Roadking, Silverstone, and Runway, catering to different market segments with a comprehensive and high-quality product lineup. This meets the needs of various vehicle types such as sedans, SUVs, off-road vehicles, racing cars, light trucks and vans, trucks, buses, construction machinery, and agricultural machinery. 2. Sales: Giti offers a wide range of high-quality tires that are sold in over 100 countries worldwide and have received recognition from both domestic and international automotive manufacturers. Tires are typically composed of three parts: the outer tire, inner tube, and flap. Some tires do not require an inner tube, as they feature an inner layer of highly airtight rubber and must be paired with specialized rims. Globally, tire structures are evolving towards tubeless designs, radial construction, flat profiles, and lightweight materials.

5

4

Share

What is No. 30 Engine Oil?

Mechanical oil grades are determined based on their kinematic viscosity at 50°C. The kinematic viscosity of No. 30 mechanical oil at 50°C ranges from 27 to 33 mm²/s, with a pour point of -10°C and a flash point of 180°C. Mechanical oils are categorized into seven grades from 10 to 70, with higher numbers indicating greater viscosity. The SAE lubricant viscosity classification for summer oils includes grades 20, 30, 40, and 50, where higher numbers denote higher viscosity and suitability for higher maximum temperatures. Below are specific details about engine oil: 1. Mineral Oil: Derived from crude oil, mineral oil is typically low-cost but oxidizes more easily due to its mineral base. Various imported additives are included, and its service life is approximately six months. 2. Semi-Synthetic Oil: Although more expensive to refine, it offers excellent oxidation resistance, making it a high-quality long-lasting oil with a service life of about twelve months. Considering the balance between price and quality, semi-synthetic oil has the widest range of applications. 3. Full Synthetic Oil: This is chemically synthesized oil that can maintain lubrication even when the base oil deteriorates.

13

2

Share

How are demerit points deducted when combining C1 and E licenses?

What is the top speed of the Kawasaki H2R?

How many kilometers can 3 liters of oil run?

What is the difference between Audi A4L40 and Audi A4L45?

What is the distance for pulling over in Subject 3?

What does 'maximum' mean on tires?

What is No. 30 Engine Oil?

What is a Red Badge Honda?

What is the maximum speed of a 400W motor?

How many atmospheres is 35 psi?

Why is there a gasoline smell when the air conditioning is on in the car?