How are cars classified?

2 Answers
DeWalter
07/24/25 2:40pm
Cars are classified as follows: In China, passenger cars are categorized based on engine displacement into micro cars, standard cars, mid-size cars, upper-mid-size cars, and luxury cars. Micro cars: displacement less than 1L; Standard cars: displacement between 1L and 1.6L; Mid-size cars: displacement between 1.6L and 2.5L; Upper-mid-size cars: displacement between 2.5L and 4L; Luxury cars: displacement greater than 4L. German classification standards German cars are divided into A00, A0, A, B, C, and D levels. Among them, A-class cars refer to compact cars, B-class cars are mid-size cars, C-class cars are luxury cars, and D-class cars are premium luxury cars. The classification is mainly based on parameters such as wheelbase, displacement, and weight.
Was this review help?
17
3
Share
LeRiley
08/11/25 8:27am
I found it quite interesting when I researched car classifications recently. Mainstream categories include micro cars (A00 segment), subcompact cars (A0 segment), compact cars (A segment), midsize cars (B segment), full-size cars (C segment), and luxury cars (D segment). Micro cars like the Wuling Hongguang MINIEV are less than 3.7 meters long, while compact cars such as the Civic, measuring around 4.6 meters, serve as mainstream family vehicles. Currently, nearly 80% of domestic sales are concentrated in A to B segment cars. The new energy era has brought changes too – for instance, the Tesla Model 3 is classified as a B segment car but has a longer wheelbase than comparable fuel-powered vehicles due to its battery layout. SUVs are further divided into subcompact/compact/full-size categories, with models like the CR-V being typical compact SUVs. Different budgets correspond to different segments – the A segment is most suitable for budgets around 150,000 yuan.
Was this review help?
1
3
Share
Expand All
More Forum Discussions

What are the steps to start a Volkswagen automatic transmission?

Here are the steps to start a Volkswagen automatic transmission: 1. After sitting in the driver's seat, there is no need to press the brake pedal. Simply press the start button once, and the ACC light will turn on. Press it once more, and the vehicle will begin its self-check. It is recommended not to skip the self-check step during every cold start, though it can be skipped during a warm start. 2. Press the brake pedal and then press the start button again to ignite the engine. Under normal circumstances, the engine should start within 3 seconds of pressing the ignition switch. If the engine has difficulty starting, avoid frequent attempts; let the starter rest for a while after every 5 attempts to prevent burning it out. 3. Release the foot brake. You may choose to warm up the car while stationary. The duration can be determined by the environment, specifically by observing the water temperature gauge on the dashboard. When the water temperature reaches and stabilizes around 90 degrees, it indicates that the warm-up is complete. 4. Press the foot brake again, shift to D gear, and release the handbrake (for electronic handbrakes, simply press the button briefly). Before starting, check the road conditions clearly through the rearview mirror to ensure it is safe to proceed. Also, sound the horn and turn on the turn signal to alert other vehicles and pedestrians. 5. Slowly release the foot brake to start moving. After starting, quickly merge into the road and drive at the designated speed. 6. Depending on the road conditions, smoothly press the accelerator to speed up and drive safely.
8
3
Share

What does the Land Cruiser GXR represent?

The Land Cruiser GXR model is the base trim level and the entry-level variant. Below is information about the Land Cruiser: 1. The Toyota Land Cruiser is a mid-to-large-size SUV with dimensions of 5095mm in length, 1975mm in width, 1930mm in height, and a wheelbase of 2850mm. 2. The Toyota Land Cruiser is equipped with two engines: one is a 4.0L V6 naturally aspirated engine with a maximum power output of 202kW and a maximum torque of 385Nm. This engine reaches its peak power at 5600rpm and peak torque at 4400rpm. It features VVT-i technology and multi-point fuel injection, along with an aluminum alloy cylinder head and block. This engine is paired with a 5-speed automatic transmission. The other engine is a 4.6L V8 naturally aspirated engine, delivering a maximum power of 228kW and a maximum torque of 453Nm. This engine achieves peak power at 5500rpm and peak torque at 3400rpm. It also utilizes multi-point fuel injection and an aluminum alloy cylinder head and block, mated to a 6-speed automatic transmission. The Toyota Land Cruiser employs a double-wishbone independent front suspension and a four-link solid axle non-independent rear suspension. 3. The Toyota Land Cruiser comes with a full-time four-wheel-drive system and a Torsen center differential.
3
4
Share

How much engine oil does the Honda 650R require?

For the Honda CB650F or CB650R, the engine oil capacity during an oil change is 2.6 liters, and when replacing the oil filter, the capacity increases to 2.9 liters. Always verify using the dipstick. Park the motorcycle on level ground, remove the dipstick and wipe it clean, then reinsert it (push it all the way in without screwing it in). Pull it out again to check that the oil level is between the lower and upper marks on the dipstick's grid pattern. Selecting the appropriate engine oil: When choosing engine oil, strictly adhere to the oil grade specified in the owner's manual. If the same grade is unavailable, only use a higher-grade oil; never substitute with a lower-grade oil. Additionally, ensure the oil viscosity meets requirements—don't just opt for the most expensive option without verifying its suitability. Draining and inspection: After the technician loosens the oil pan drain plug or oil filter to drain the used oil, note the following: Always install a new sealing washer on the drain plug before tightening it. Before installing the new oil filter, carefully inspect whether the old filter's rubber sealing ring was removed along with the filter.
1
4
Share

Does Castrol have the Quanhu series?

Dongfeng Castrol primarily focuses on the production of original equipment manufacturer (OEM) lubricants for Dongfeng Group and aftermarket service oils. The aftermarket-produced lubricants are referred to as the Quanhu series. The performance of the Quanhu series products is commendable. After using them for a period, the fully synthetic lubricants offer excellent cost-performance ratio. With Castrol's technical support, the overall performance is comparable to Castrol's Edge series products, making them reliable for use. Advantages of Castrol: Castrol's main advantages include excellent cold-start performance, providing protection even before the engine starts, superior anti-wear properties compared to other lubricants, and effective reduction of engine noise. However, its cleaning capability is not as good as Shell and Mobil's equivalent products, and the lubricant tends to degrade relatively quickly. It's evident that different brands of lubricants have their own strengths and weaknesses, with some focusing on cleaning performance and others on high-temperature wear resistance. Precautions for using synthetic lubricants: It is important to note that in extreme weather and environmental conditions, it is recommended that vehicle owners use fully synthetic lubricants. For example, extremely cold regions, dusty areas, severely humid environments, and high-temperature zones can all impose significant stress and damage on the engine.
7
0
Share

Why Do I Feel Vibration When Idling in the Car?

The reasons for feeling vibration when idling in the car are as follows: 1. The most common reason for feeling slight vibration when idling in the car is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold-start fuel injector will be largely absorbed by the carbon deposits, resulting in a lean air-fuel mixture during cold starts and making it difficult to start. The gasoline adsorbed on the carbon deposits will then be sucked into the combustion chamber by the engine's vacuum, enriching the air-fuel mixture. This fluctuation between lean and rich mixtures causes idle vibration after a cold start. 2. Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance of the ignition system or weak spark from the spark plugs can also lead to such issues. The solution is to check if the spark plugs have excessive carbon buildup and replace them if necessary. 3. If you have already cleaned the engine carbon deposits, cleaned the throttle body, replaced the oil pads and spark plugs, but still notice body vibration during idle, it is recommended to visit a 4S shop to check the fuel supply pressure and the intake pressure sensor. Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can also cause body vibration. 4. Car vibration can also be related to aging engine mounts. Engine mounts are essentially the shock absorption system of the engine, responsible for absorbing minor vibrations during engine operation. If the engine mounts are faulty, these vibrations will be transmitted to the steering wheel and the cabin, causing vibration during idle.
4
3
Share

Where is the USB port located in the 2014 Sagitar?

Center Console: Lift the armrest to find the USB and AUX ports. Glove Compartment (Passenger Side): Contains a USB cable. Here are some relevant details: 1. Car USB: Can be used to read USB drive information for the car's entertainment system and charge mobile devices. Since the vehicle provides lower voltage, the car charger only requires an overload protection circuit internally. 2. Additional Information: Avoid using the car charger in humid environments and do not store it in damp conditions. Keep away from children and remember to unplug the charger after use.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.