Honking at Traffic Lights is Prohibited, What to Do if You Honk?

1 Answers
EmmaDella
07/29/25 12:53pm
Honking at traffic lights is prohibited and may result in a fine. Motor vehicle drivers who honk in no-honking zones or during prohibited times are committing a traffic violation and should be penalized according to the law. Relevant information about traffic lights is as follows: 1. Introduction: Traffic lights are signals that direct traffic flow, typically consisting of red, green, and yellow lights. A red light means stop, a green light means go, and a yellow light serves as a warning. 2. Control Methods: The most basic control method is timed control at a single intersection. Line control and area control can also use timed control methods, known as static line control systems and static area control systems.
Was this review help?
11
1
Share
More Forum Discussions

Why does the car shake after starting?

The reasons for car shaking after starting: 1. Low ignition energy: As the vehicle's usage time extends, the spark plug's ignition gap tends to increase, resulting in reduced ignition energy, causing the car to shake; 2. Carbon deposits on valves and intake passages: Carbon deposits absorb some fuel, leading to ECU judgment errors, insufficient fuel entering the cylinders, resulting in insufficient power output and shaking; 3. Incorrect mixture ratio: Normally, the oxygen sensor operates at around 370 degrees Celsius, but a newly started car cannot reach the required temperature for the oxygen sensor to function, causing it to be inactive. This leads to errors in controlling the air-fuel mixture and ignition timing, resulting in a completely chaotic mixture ratio and vehicle shaking; 4. Varying cylinder conditions: After prolonged use of the engine, the ignition gaps and timing control of the spark plugs in each cylinder can vary, causing reduced power output and shaking.
10
4
Share

What is the bulb model for a 125cc motorcycle headlight?

125cc motorcycle headlight bulb model is X9-H4. Below is relevant information about motorcycle headlights: Function: Motorcycle headlights primarily serve lighting and signaling purposes. The light emitted illuminates the road conditions ahead of the vehicle, enabling safe nighttime riding. Classification: Motorcycle headlights can be categorized by light source into: halogen-tungsten lamps and xenon lamps. Halogen lamps produce light through tungsten filaments, with low lumens, insufficient brightness, high power consumption, and a lifespan of only 600 hours. Application: Motorcycle headlights (high beam, low beam) are used during nighttime and foggy conditions to clearly see vehicles and pedestrians ahead while riding. However, when meeting oncoming traffic, the low beam should be used to avoid affecting the other party's visibility and causing collisions.
17
2
Share

How many points will be deducted for consecutive lane changes at highway exits?

Consecutive lane changes at highway exits will result in a 3-point deduction. Crossing solid lines on highways while changing lanes constitutes a violation of prohibitory signs and markings while driving a motor vehicle, typically incurring a 3-point penalty. The offender must address the violation record at the vehicle management office in the jurisdiction where the vehicle is registered and pay the fine at a bank within 15 days. Below are specific details about crossing solid lines: 1. Classification: Includes center single/double solid lines on urban roads, lane divider lines in intersection solid line zones, and separation lines between motor vehicle lanes and non-motor vehicle lanes. 2. Regulations: Traffic laws explicitly prohibit motor vehicles from crossing single/double solid lines. Violators are subject to fines and a 3-point penalty per offense. Although single and double solid lines differ in severity, their legal effect is identical—motor vehicles must not cross either type.
20
0
Share

What is the reason for being unable to start after disassembling the battery?

The reasons for being unable to start after disassembling the battery: Poor contact in one of the battery connection wires, causing the electric vehicle to have power but fail to start. A battery pack is composed of multiple small batteries, and each small battery also has connection wires. If the connection wires become loose due to external factors or are corroded, poor contact will occur. In this case, if it is under no-load conditions, it may seem like there is power, but in reality, it cannot start or drive. The car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. Batteries are divided into ordinary batteries, dry-charged batteries, and maintenance-free batteries. Usually, the batteries people refer to are lead-acid batteries. The normal service life of a car battery ranges from 1 to 8 years, which is highly related to the condition of the vehicle.
18
5
Share

What are the symptoms of a faulty brake booster?

It will trigger the warning light, and the brake pedal will feel very soft when pressed. In severe cases, the braking function may be completely lost. The brake booster, also known as the vacuum booster pump, is detailed below: 1. Function: The vacuum booster pump utilizes the vacuum generated by the engine during operation to provide assistance to the driver when braking, making the pedal feel lighter. If the vacuum booster pump is damaged, there will be no assistance, making the brake pedal feel heavy. Generally, the vacuum pump cannot be repaired and must be replaced. Its internal structure consists of a piston (with an O-ring seal) and a cylinder. It works by using the engine's intake vacuum to assist in braking. No special lubrication is required. 2. Booster Pump: The brake booster pump is a large-diameter vacuum chamber with a diaphragm in the middle that contains a push rod, dividing the chamber into two parts. One part is connected to the atmosphere, and the other is connected to the engine's intake manifold via a pipe. Therefore, when the engine is turned off, there is no intake vacuum, and thus no assistance, requiring significantly more human effort for braking.
9
0
Share

What Causes Gear Shifting Jerkiness?

If this situation occurs in a manual transmission car, it is generally due to improper coordination between the throttle and clutch during gear shifting. For automatic transmission cars, this issue arises because of mismatched gear ratios in the transmission. Below are relevant explanations: 1. Maintain Stable RPM: To reduce gear shifting jerkiness, it is essential to keep the car engine's RPM stable during gear changes. This can be achieved by adjusting the shifting RPM, shortening the shifting time, applying throttle during shifting, and performing semi-clutch operations to stabilize the engine RPM. 2. Additional Information: The optimal RPM for gear shifting is around 2000 RPM. Shifting at too low an RPM may cause the vehicle to stall, while shifting at too high an RPM can lead to vehicle lurching. Shortening the shifting time is crucial because the shorter the shifting time, the more stable the engine RPM will be. Applying throttle during gear shifts is necessary because prolonged shifting time causes the engine RPM to drop, resulting in jerkiness.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.