···
Log in / Register

Highlander Start-Stop Usage Tips?

4 Answers
MacLukas
07/29/25 9:57am
The method to use the Highlander's start-stop system is: the start-stop switch is located on the left side of the steering wheel. Press the stop and start cancel button to disable the stop and start system. More information about the Highlander is as follows: 1. The Highlander features a wide body with an innovative and spacious interior, making it a large-sized SUV in the Toyota family. The Highlander comes standard with the highest level of safety equipment in its class. 2. The Highlander is equipped with a 3.5-liter V6 engine that delivers up to 201 kilowatts of power, paired with a stepped 5-speed automatic transmission with manual mode.
Was this review help?
7
0
Share
DeLily
08/13/25 12:12pm
I've been driving for over a decade, and the Highlander's start-stop function works quite smoothly—the key is learning to activate it in appropriate scenarios. For instance, triggering it during long red lights or when parked for over 30 seconds can save a lot of fuel; turn it off during short stops like traffic jams to avoid repeated starts that wear down the battery. The system defaults to on, but the button near the steering wheel allows manual control—pressing it disables the function, and the icon will light up. Remember, battery health is crucial: check the charge regularly to prevent delayed starts, especially during scorching summers or freezing winters when the car might start slower—don’t rush. Also, avoid enabling it on slopes to prevent rolling, and note that the system restarts faster if the AC is on. Once you develop the habit, it can save dozens in fuel costs monthly while being eco-friendly.
Was this review help?
17
5
Share
Expand All
WillowDella
10/07/25 2:02am
I think the start-stop function is a great helper for environmental protection and energy saving, and I mainly use it to reduce emissions. The trick is to let the system operate automatically without frequent intervention; only enable it on smooth traffic roads and manually turn it off during peak congestion to reduce wear. Regular battery maintenance ensures its health; the effect is better when the cabin temperature is stable. Proper use can also extend fuel-saving habits, such as smooth acceleration and deceleration. In urban driving, combining navigation to predict red lights and preparing to start or stop in advance can reduce overall fuel consumption by 5-10%. Small things add up to make a big difference.
Was this review help?
11
1
Share
Expand All
LeChristopher
11/20/25 3:25am
For regular car owners, the start-stop technique is simple: press the brake pedal firmly to activate the system, and release it slightly to restart; the button near the steering wheel allows you to toggle it on/off anytime. The key to fuel saving lies in disabling it for short stops, and it automatically deactivates when the battery is low. For maintenance, pay attention to battery lifespan and check it annually; starting with the AC on ensures smoother operation, and avoid using it on slopes to prevent risks. Pro tip: Let the system learn your habits when the car is new.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

What is the emission standard for vehicles from 2017?

Vehicles from 2017 comply with the China V emission standard. The full name of the China V standard is the National Fifth Stage Emission Standard for Motor Vehicle Pollutants. The emission control level of the China V standard is equivalent to the Euro 5 emission standard currently implemented in Europe. The European Union has been enforcing this standard since 2009, which imposes stricter limits on vehicle emissions such as nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter. From China I to China IV, each upgrade in the standard reduces vehicle pollution by 30% to 50%. Compared to the China IV standard, the China V standard reduces nitrogen oxide emissions from light-duty vehicles by 25% and from heavy-duty vehicles by 43%. Effects of implementing the China V standard: It promotes the improvement of domestic gasoline and diesel quality for vehicles, contributes to the reduction of pollutants from new vehicles, and improves the emission conditions of a large number of in-use vehicles.
15
3
Share

How to Change the Transmission Oil for Lavida?

Here are the steps to change the transmission oil for Lavida: 1. Start the engine and wait until it reaches normal operating temperature; 2. Loosen the oil drain plug with a wrench and use an oil pan to catch the old oil until it stops flowing. Then, run the engine for 30 seconds to allow the oil in the main oil passage to drain; 3. Remove the oil filter using a specialized wrench; 4. Apply some oil to the oil seal of the new oil filter and tighten it clockwise by hand; 5. Add new oil through the oil filler cap on the engine valve cover, typically filling up to three-quarters of the oil container; 6. Start the engine and let it run for 5 minutes, then check for any leaks around the oil drain plug and oil filter. If leaks are found, perform necessary repairs; 7. After stopping the engine, pull out the oil dipstick to ensure the oil level is within the standard range.
19
3
Share

How to Solve the EPC Light Issue in a Car?

The solutions for the EPC light issue in a car are as follows: 1. Check the throttle body: It might be clogged, so clean the throttle body immediately. 2. Inspect the wiring: This could cause the brake lights to malfunction, so check the brake switch and wiring. 3. Examine the fuel quality: Poor fuel quality can also trigger the EPC warning light, so it is recommended to use high-quality gasoline. If the EPC light is on but the vehicle shows no obvious signs of malfunction and can still be driven, the driver can try turning off and restarting the engine to turn off the EPC light. Even if there are no apparent issues, the driver should not take it lightly and should promptly have the vehicle inspected and repaired.
8
3
Share

Which country does the Citroën car brand belong to?

Citroën is a French automobile brand. Founded in 1919, Citroën became one of the two car brands under the PSA Peugeot Citroën Group in 1976. Here is an introduction about Citroën: 1. Dongfeng Citroën is a joint venture established in China by China's Dongfeng Motor Group and France's PSA Automobile Group. 2. Citroën is an automobile brand under the PSA Group and operates as an independent subsidiary domestically. 3. In 1976, Citroën Automobile Company merged with Peugeot to form the Peugeot Group, one of the top three automobile companies in Europe. 4. Citroën Automobile Company is the third largest automobile company in France, primarily producing passenger cars, light commercial vehicles, and mid-to-high-end automobiles.
2
3
Share

Why are Brabus cars so rare?

Here are the specific details about Brabus cars: 1. High-performance modified vehicles: Brabus cars are high-performance modified vehicles created by Brabus based on Mercedes-Benz models. Brabus spares no expense in modifications, going far beyond simple alterations to the original vehicle. Each model undergoes extremely strict quality control. Additionally, Brabus's exclusive test track allows for comprehensive testing of modified vehicles, ensuring the driving quality of every customized car. 2. Mercedes-Benz's official tuning partner: Although Brabus is not a subsidiary of Mercedes-Benz, it serves as the brand's official tuning partner. The modified Brabus models have set numerous performance records for factory-tuned vehicles, rivaling even the Mercedes-AMG series. Furthermore, all Smart Forfour modified vehicles worldwide are crafted by the Brabus tuning division.
18
5
Share

How to Replace the Air Filter Element in the New Mondeo?

New Mondeo air filter element replacement method is as follows: 1. Use tools to loosen the locking nut on the air filter box, open the cover, and you can see the appearance of the air filter element. 2. Take out the filter element to check the condition. If it is too dirty, it needs to be replaced. If it is not dirty, it can be cleaned and reused. 3. Install the new air filter element, paying attention to the direction of the filter element during installation. The following introduces the cleaning method of the Ford Mondeo air filter element: 1. The owner can use an air gun for operation. If not available, a hair dryer can be used as a substitute. 2. The filter element has good filtration capability. First blow impurities from the outside in, then blow from the back side of the intake direction, and finally dust off the surface dust by hand.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.