Hidden Functions of Volkswagen Teramont Key?

1 Answers
KayleeLee
07/29/25 4:05pm
Volkswagen Teramont X's key has the following hidden functions: Press and hold the unlock button to simultaneously lower all four windows; Press and hold the lock button to simultaneously raise all four windows. However, this feature is not enabled by default in some models and needs to be activated in the vehicle system settings on the central control screen before use. The steps to replace the Volkswagen Teramont X key battery are as follows: 1. Pull out the mechanical key by pressing the button at the end of the key, then stand the key upright. 2. Use a screwdriver to pry open the key cover by pushing outward from the middle of the key. 3. At this point, you can see the battery cover. Pry along the gap to remove the battery. 4. After replacing with a new battery, put the cover back and close the key.
Was this review help?
5
2
Share
More Forum Discussions

How many points are deducted for using the emergency lane?

Using the emergency lane results in a deduction of 6 points, as the emergency lane is only permitted for vehicles such as police cars, fire trucks, and ambulances when performing emergency tasks. When there is no emergency, it is illegal for social vehicles to occupy the emergency lane, whether for parking or driving. If there are other illegal or traffic violations, the penalties will be cumulative. If a vehicle encounters special circumstances such as a breakdown, it is allowed to drive or park in the emergency lane. However, it is important to note that the faulty vehicle must turn on the hazard warning lights and place a warning sign 150 meters behind the vehicle. During nighttime, rain, fog, or other adverse weather conditions, the position lights, tail lights, and rear fog lights should also be turned on. Other occupants should evacuate the road to a safe place. If necessary, you can call the highway traffic police assistance hotline at 12122.
3
5
Share

Where is the rearview mirror heating switch located?

The rearview mirror heating switch is located next to the exterior mirror adjustment button, featuring a rectangular pattern with wavy lines. To activate the rearview mirror heating function, follow these steps: 1. Press the brake pedal to power on the vehicle. 2. Press the vehicle's one-touch start button. 3. The dashboard will illuminate, indicating the vehicle is powered on. 4. Press the heating button located next to the exterior mirror switch to activate the function. 5. Once activated, the fog on the exterior mirrors will gradually dissipate. The rearview mirror heating function only operates when the ambient temperature is below 15°C. Additionally, the heating function should not be left on continuously; each use should not exceed 30 minutes to avoid affecting the lifespan and clarity of the rearview mirrors.
7
2
Share

What are the reasons why a car remote key cannot lock the vehicle?

Reasons why a car remote key fails to lock the vehicle: 1. If you are using the remote key to lock the door, it is likely that the remote lock is malfunctioning or the antenna of the car's remote transmitter has aged, causing the remote key to be ineffective. In this case, you can use the spare mechanical key to lock the vehicle; 2. There is strong magnetic signal interference around the car. Since smart keys use low-intensity radio waves, they cannot function properly under magnetic interference; 3. If the car frequently fails to lock remotely in a certain location, the owner should be wary of door jammers, as criminals may use a radio signal jammer that emits electromagnetic waves at the same frequency as the lock signal, thereby blocking the electronic code of the car's central lock and temporarily disabling it.
19
2
Share

What does the throttle position sensor control?

The main function of the throttle position sensor is to detect whether the engine is in idle condition or load condition, whether it is in acceleration condition or deceleration condition. The following is an introduction to the throttle position sensor: 1. Essentially, it is a variable resistor and several switches. The rotating shaft of the resistor is linked with the throttle, and it has two contacts: a full-open contact and an idle contact. 2. When the throttle is in the idle position, the idle contact closes and sends an idle condition signal to the computer; when the throttle is in other positions, the idle contact opens and outputs a voltage signal corresponding to the different rotation angles of the throttle. The computer then identifies the engine load based on the signal voltage value. 3. By analyzing the rate of change in the signal voltage over a certain period of time, the computer identifies whether it is an acceleration or deceleration condition. Based on these condition signals, the computer adjusts the fuel injection amount or performs fuel cut-off control.
15
0
Share

What are the maintenance items for a new car at 30,000 kilometers?

The maintenance items required for a car at 30,000 kilometers include the following: 1. Replace the engine oil and oil filter, both of which need to be replaced during every maintenance. 2. Check whether the air filter and cabin air filter can continue to be used; if not, they need to be replaced. 3. Check if the coolant level has decreased. Inspect whether the spark plugs need replacement. 4. Conduct a comprehensive inspection of the entire vehicle and clean areas that require cleaning. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle.
18
5
Share

How Often Should Engine Oil Be Changed?

There is no fixed interval for changing engine oil. The specific replacement period depends on actual driving conditions and the vehicle's condition. Different types of engine oil also have different replacement cycles. The details are as follows: Engine oil can be divided into mineral oil, semi-synthetic oil, and full-synthetic oil. If mineral oil is used, it should generally be changed every six months or after driving about 5,000 kilometers. If semi-synthetic oil is used, it should be changed every 7-8 months or after driving about 7,500 kilometers. If full-synthetic oil is used, it can be changed after driving for about one year or 10,000 kilometers. The condition of the engine oil can be checked using an oil test filter paper. After parking the car for ten minutes, dip the oil dipstick into the oil and drip it onto the test filter paper. The test filter paper may show the following three conditions: 1. The three rings are clearly distinguishable, indicating the oil can still be used. 2. The oil ring disappears, leaving only the deposit ring and diffusion ring, suggesting it's time to change the oil. 3. Only the darker deposit ring remains, indicating an immediate oil change is required.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.