Hazards of Emission Control System Failure?

2 Answers
StEzra
07/24/25 5:30am
Hazards of emission control system failure include increased fuel consumption and reduced engine lifespan. Below is a detailed introduction to the hazards of emission control system failure: 1. Increased fuel consumption: It will lead to higher fuel consumption, and over time, poor combustion efficiency can result in excessive carbon buildup. 2. Reduced lifespan: It can create safety hazards during driving and shorten the engine's service life. During vehicle operation, faults in the fuel supply system, ignition system, etc., can cause engine overheating, backfire, leading to sintering and peeling of the three-way catalytic converter substrate, increased exhaust resistance, etc. The air-fuel mixture correction loses its basis, causing inaccurate fuel injection control by the ECU, which over time will affect the engine's lifespan.
Was this review help?
4
0
Share
Chavez
08/11/25 1:09am
When driving, I've noticed that emission system failures are truly troublesome. Not only do they make exhaust fumes pungent and unpleasant, but they also worsen environmental pollution by releasing harmful gases like nitrogen oxides that contribute to urban smog and acid rain, affecting everyone's respiratory health. Vehicle performance deteriorates too - the engine hums weakly with reduced power, fuel consumption spikes dramatically, and driving efficiency plummets. If left unrepaired, long-term damage may occur to other components like sensors or catalytic converters, often resulting in exorbitant repair costs. There are legal risks as well; exceeding emission standards can lead to traffic police fines or failed annual inspections - last year this caused me several days of delay. Overall, such malfunctions bring multiple hazards. Regular inspections and maintenance are essential to avoid extra expenses and health issues, ensuring both peace of mind and cost savings while driving.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

How to distinguish the front and back of an air filter?

Methods to distinguish the front and back of an air filter: The side with the arrow pointing upward is the front, which should face the airflow direction during installation. The arrow indicates the airflow direction, i.e., the installation orientation. Alternatively, you can determine the front and back by observing the surface of the air filter. Generally, the fuzzy side is the front, facing upward toward the airflow direction, while the side with supporting wire structures is the back, facing away from the airflow direction. The replacement cycle of a car's air conditioning filter depends on individual driving habits, external environment, and seasonal climate. Typically, for urban household vehicles, it should be replaced every 10,000 to 20,000 kilometers or approximately once a year. If the driving environment is poor with more dust, the air conditioning filter tends to get dirty faster, and the replacement interval should be shortened accordingly.
4
4
Share

What is the fuel consumption per 100 kilometers for the BMW 320i?

The fuel consumption per 100 kilometers for the BMW 320i is 8.8 liters. Below are detailed introductions about it: 1. Exterior design: The front face features BMW's signature double-kidney grille paired with a uniquely styled lower bumper, giving it a very grand and dynamic appearance. Combined with the standard LED headlights across the entire series, this 3 Series model exudes luxury. On the side profile, despite being a standard wheelbase, the body proportions are perfectly balanced, presenting an elegant look. 2. Powertrain: Equipped with a B48 2.0T turbocharged engine, it delivers a maximum horsepower of 156Ps and a peak torque of 250N.m, paired with a ZF 8-speed automatic transmission.
5
0
Share

How to Open the Fuel Tank Cap on a BMW 730?

When the remote key is in the unlocked state, simply press the fuel tank cap on the right side of the BMW 730's body to open it. Here are some detailed specifications about the vehicle: 1. Powertrain: Equipped with a high-power 2.0T engine, delivering a maximum horsepower of 265ps and a peak torque of 400N·m. Paired with an aggressively tuned 8AT transmission, the 0-100km/h acceleration time is approximately 6.0-6.5 seconds. 2. Features: Comes standard with 19-inch exquisitely crafted alloy wheels, ventilated disc brakes on both front and rear axles, and a comprehensive suite of active and passive safety features, including Lane Departure Warning System, Active Safety System, and Fatigue Driving Alert.
7
2
Share

How Long Can a Car Drive Continuously Before Needing a Break?

Drivers should not drive continuously for more than four hours. Upon reaching this duration, they should take a break of at least 20 minutes at a service area. Here are some relevant details: 1. Fatigue Driving: Fatigue driving is highly likely to cause traffic accidents. It refers to the phenomenon where a driver experiences physiological and psychological dysfunction after prolonged continuous driving, leading to a decline in driving skills. Poor or insufficient sleep quality and extended periods of driving can easily result in a lack of endogenous oxygen, leading to fatigue. 2. Precautions: When driving on highways, it is essential to plan the journey reasonably, ensuring sufficient time for breaks at service areas to avoid fatigue driving.
6
5
Share

How to Adjust When the Car Has Turned?

If the car has turned, the driver should first determine the orientation, which is the north-south direction. The sun can be used as a directional reference point to preliminarily determine the south direction, and then the driver's position can be identified based on the reference point. Alternatively, the direction can be determined by observing the position of the sun, the density of leaves, stars, etc. Once north is found, the direction can be established. Below are some driving precautions: 1. Check the rearview mirrors: When turning or changing lanes, always use the turn signal, slow down, and check the rearview mirrors before turning. Left turns mainly require checking the left rearview mirror, right turns mainly require checking the right rearview mirror, and both left and right turns require checking the interior rearview mirror. 2. Don’t focus solely on the front of the car: When driving on a clear road, look straight ahead at a distance of 100 meters, avoiding fixation on the immediate front of the car. 3. Depress the clutch: Generally, when decelerating at speeds above 40 km/h, there’s no need to depress the clutch first; wait until the speed drops to around 20 km/h before depressing the clutch. 4. Steering: Turn the steering wheel slowly at high speeds and quickly at low speeds.
5
0
Share

How is single-point speeding penalized?

The penalties for speeding on highways are as follows: 1. For medium-sized or larger passenger or cargo vehicles, school buses, and hazardous material transport vehicles exceeding the speed limit by 20% or more on highways, 12 demerit points will be recorded; for other vehicles exceeding the speed limit by 50% or more on highways, 12 demerit points will be recorded, and a fine of 200 to 2000 yuan will be imposed. 2. For exceeding the speed limit by 20% to 50% on highways, 6 demerit points will be recorded, and a fine of 20 to 200 yuan will be imposed. 3. For exceeding the speed limit by 10% to 20% on highways, 3 demerit points will be recorded, and a fine of 20 to 200 yuan will be imposed. Relevant information about speed limits is as follows: 1. Introduction to speed limits: Speed limits typically refer to the regulation of driving speeds within a certain numerical range over a specified length of road. 2. Purpose of speed limits: The main purpose is to preemptively remind drivers to reasonably control their speed in subsequent sections of the road ahead, prevent speeding hazards, and ensure driving safety. Speed limits are an indispensable and most important part of road transport safety.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.