Has the Yuexiang V5 been discontinued?

What Causes a Car Clutch to Not Return to Position?

Clutch not returning to position is mainly caused by air entering the clutch pipeline system or dirty clutch fluid with impurities. The clutch is a common component in mechanical transmission, which can separate or engage the transmission system at any time. The following are detailed reasons for the clutch not returning to position: Air entering the clutch pipeline system: Air in the system causes excessive clutch travel and poor return. This type of fault can be self-diagnosed. If the first press of the clutch pedal feels without resistance and has excessive travel, and the pedal rises after repeated presses, it is mostly due to air entering the hydraulic system. In this case, the cause of the air entry should be identified as soon as possible, and the air in the hydraulic system should be expelled. Dirty clutch fluid with impurities: Impurities cause severe internal wear of the clutch master cylinder or blockage of the return oil hole, preventing the clutch from returning to position. You can open the engine hood to check if the fluid in the clutch fluid reservoir appears black or gray. If discolored, the clutch fluid should be replaced promptly.

7

4

Share

Where is the stopping point for hill start?

Hill start stopping point requires parking at a fixed location on a slope with ≥10% gradient and ≥30 meters in length. Below are detailed explanations about hill start: Specific requirements for hill start: After hearing the command to start this test item, control the vehicle speed and approach the right roadside line. When the right front corner of the engine hood aligns with the roadside line at the 1/3 point, maintain the entire vehicle body at a distance of 1/3 from the roadside line. The purpose of positioning and parking detection is to assess the ability to predict the stopping point location. For example, when encountering a red light, pedestrians crossing the road, or hazardous situations requiring parking, the vehicle must stop accurately without violating traffic rules or causing danger. The test allows a certain margin of error: stopping early is permitted within half a parking space, and stopping late is allowed within half a meter; both scenarios are considered as passing. Precautions for hill start: Before performing a hill start, ensure the vehicle moves in an absolutely straight line. Before driving on the slope, maintain a distance of about 30 cm between the car and the yellow edge line. If any deviation is observed in the rearview mirror, adjust the steering wheel promptly. When parking, generally, once the lower edge of the left rearview mirror passes the white line, depress the clutch and brake pedals simultaneously, ensuring the vehicle continues to move in a straight line.

18

1

Share

How Often Should a Diesel Fuel Filter Be Replaced?

Generally, it is recommended to replace the diesel fuel filter every 5,000 to 10,000 kilometers. Failing to replace it in time may cause the diesel filter element to become clogged, leading to insufficient fuel supply and low oil pressure. This can result in symptoms such as reduced engine power, sluggish driving, and even black smoke from the exhaust. Therefore, it is essential to adhere to the replacement requirements of the diesel filter element and perform regular replacements to ensure it can effectively filter diesel at all times. The function of a diesel fuel filter is to remove harmful impurities and moisture from the fuel system, protecting the engine's normal operation, reducing wear, and preventing blockages. This helps extend the service life of components such as the fuel injection pump, diesel nozzles, and other filtration elements. When replacing the filter, avoid choosing low-quality diesel fuel filters. Inferior filters use poor-quality filter materials, which not only provide inadequate filtration but may also degrade over time when soaked in oil. The filter layer may peel off, clogging the fuel lines and causing insufficient fuel pressure, which can prevent the vehicle from starting. Additionally, this can lead to abnormal diesel system pressure, directly resulting in reduced engine power or incomplete combustion, damaging expensive components such as the catalytic converter and oxygen sensors, and causing significant financial losses.

20

1

Share

What does a driver's license mean?

Driving license refers to a driver's license. Below is a relevant introduction about driver's licenses: A driver's license is a credential required for an individual to operate a motor vehicle, issued by government transportation departments to individuals who qualify to drive. A driver's license typically specifies the types of motor vehicles the holder is permitted to drive, such as motorcycles, passenger cars, etc. To obtain a driver's license, one must meet the minimum age requirement and pass a driving test. Different countries have varying minimum age standards for applying for a driver's license. In some countries or regions where carrying an ID card is not mandatory, such as the United States, Canada, and Japan, a driver's license can serve as a form of identification. For vehicles like trucks and buses, obtaining a driver's license requires meeting the minimum age requirement and passing a driving test. Different countries have different minimum age standards for applying for a driver's license. Additionally, older driver's license holders may need to undergo a physical examination when renewing their license.

6

4

Share

From Which Day Does the 10-Day Interval for Booking Subject 2 Start?

The 10-day interval for Subject 2 starts from the day after passing Subject 1 or failing Subject 2, not on the same day of passing Subject 1 or failing Subject 2. Many eager students fail to book the exam mainly because they miscalculate the time. Below are some considerations for booking Subject 2: Booking Priority: Booking priority refers to the queuing order of candidates. Higher-priority candidates can "cut in line" and are more likely to successfully book the exam. Priority depends on several factors: first-time candidates are ranked based on the date they passed Subject 1; candidates who failed are ranked based on their last Subject 2 exam date; candidates who canceled their last booking are ranked based on the cancellation date. Avoid Peak Booking Periods: Winter and summer vacations are peak periods for students learning to drive. During these times, bookings are highly competitive due to limited exam slots. Even if test centers add weekend sessions, the additional slots are still limited. Many students may fail to book during these periods, so working professionals with flexible schedules are advised to avoid these peak student booking times. Number of Booking Attempts: Both Subject 2 and Subject 3 exams allow only five attempts. For each attempt, if the first try is unsuccessful, there is an immediate second chance for a retest. If the second try is successful, Subject 2 is considered passed. If the second retest is still unsuccessful, it counts as a failure, and the candidate must wait another 10 days before booking the next exam.

20

0

Share

Can Fake License Plates Be Recognized by Electronic Surveillance?

Fake license plates can be recognized by electronic surveillance. If a motor vehicle uses a fake license plate and commits a traffic violation, the electronic surveillance system will capture the image, but it cannot issue a specific violation notice because the license plate used by the vehicle is not registered in the traffic management department's database. License Plate Usage Notes: Motor vehicle license plates must not be obscured during use. If a license plate is damaged or lost, it must be replaced promptly. License plates are vehicle-specific and cannot be lent to other vehicles. Once installed, license plates should not be removed arbitrarily. Installation of motor vehicle license plates must be done using screws specified by the vehicle management office. License Plate Replacement Methods: There are two ways to replace a motor vehicle license plate. The first method is to visit the vehicle management office or the traffic management department of the public security authority. The second method is to use the mobile app "Traffic Management 12123" for replacement.

20

5

Share

Has the Yuexiang V5 been discontinued?

What Causes a Car Clutch to Not Return to Position?

Where is the stopping point for hill start?

How Often Should a Diesel Fuel Filter Be Replaced?

What does a driver's license mean?

From Which Day Does the 10-Day Interval for Booking Subject 2 Start?

Can Fake License Plates Be Recognized by Electronic Surveillance?

Can I apply for vehicle inspection exemption on weekends through 12123?

How many days does it generally take to successfully book a driving test on 12123?

What are the rules for self-selecting license plate numbers on 12123?

Will smoking while driving be captured by electronic surveillance cameras?