Has the warranty period for the Roewe RX5 been extended?

1 Answers
LillianRose
07/30/25 8:03am
The original warranty period for the Roewe RX5 was 3 years, but it has since been extended to 5 years or 100,000 kilometers. The 2018 Roewe RX5 will continue to use the current models' 1.5T and 2.0T turbocharged engines. The 1.5T engine has a maximum power output of 169 horsepower and a peak torque of 250N·m, paired with either a 6-speed manual or 7-speed dual-clutch transmission. Roewe RX5 Beyond Edition: 1. Configuration: The new car inherits Roewe's Rhythm Design language, featuring a full range standard new-generation Rhythm Pro Wing Grille; a wheelbase of 2700mm and the largest panoramic sunroof in its class with an opening area of 0.86m². 2. Powertrain: The new car is equipped with SAIC's world-class 'Blue Core' powertrain, not only fully meeting the strictest real National VI emission standards but also balancing high efficiency and fuel economy, with a maximum power of 169 horsepower and maximum torque of 250 Nm. The official combined fuel consumption is as low as 6.5L per 100km. The new car also comes with 18-inch precision-machined aluminum alloy wheels and high-quality German Continental brake calipers.
Was this review help?
18
0
Share
More Forum Discussions

What is the horsepower of a 178 air-cooled diesel engine?

178 air-cooled diesel engine has 8 horsepower. The following are specific precautions for using an air-cooled diesel engine: 1. Regularly check and adjust the tightness of the fan belt. If the belt is too tight, it will overload the fan bearings and cause premature wear; if too loose, the belt will slip, reducing the fan's air volume, causing the diesel engine to overheat, and the belt will also be easily damaged. 2. Lubricate the fan bearings and tensioner pulley bearings (many air-cooled diesel engines are equipped with a tensioner pulley to adjust the tightness of the fan belt) on time to ensure good lubrication, smooth rotation, and no sticking. 3. Avoid prolonged idling, as insufficient fan speed and reduced air volume will lead to poor cooling and engine overheating. 4. The air guide cover must not be deformed and must maintain good sealing. Before starting, check if the air guide cover hooks are fastened; during operation, always keep the cover closed, otherwise, the air intake direction and flow will change, causing hot air recirculation and reducing cooling efficiency. 5. Ensure that the wind deflector is not missing, damaged, or lost to maintain cooling effectiveness. 6. Promptly fix oil leaks. Leaked oil can be blown onto the radiator fins by the fan, attracting dust and obstructing ventilation between the fins, weakening heat dissipation.
8
1
Share

What is the Difference Between 10W-30 and 10W-40 Engine Oil?

10w-30 and 10w-40 engine oil differences: 1. Different viscosity: 10w-30 engine oil has lower viscosity than 10w-40. 10w-40 engine oil has higher viscosity than 10w-30. 2. Different applicable temperature ranges: The applicable range for 10w-30 engine oil is between -25°C in winter and 30°C in summer; while the applicable range for 10w-40 engine oil is between -25°C in winter and 40°C in summer. 3. Different grade classifications: 10w-30 engine oil belongs to the low-temperature type; 10w-40 engine oil meets the requirements of SAE15W, 10W, 5W for low-temperature viscosity grades and SAE40, 50 for high-temperature viscosity grades, making it an all-season type. Below is extended content: 1. SAE specifies 11 engine oil viscosity grades, indicating which grade of oil should be used at what atmospheric temperature. 2. Among these 11 grades, 6 are winter oils, represented by the letter W, including 0W, 5W, 10W, 20W, 25W. The number before W indicates the minimum temperature at which the oil grade is applicable, with smaller numbers indicating lower temperatures.
18
0
Share

Where is the defogging button on the Audi Q3?

Audi Q3's air conditioning defogging button is located in the air conditioning control area on the center console. Among the four buttons in the bottom row of this area, the second one is the defrosting and defogging switch for the front windshield and side windows, while the third one is the rear window heating, defrosting, and defogging switch. Tips for defogging your car: 1. Use a dry cloth or towel to wipe: The most primitive method is to directly wipe the glass with a dry cloth. Although simple, this method is relatively laborious, leaves marks on the glass, and the fog quickly reappears. Moreover, wiping while driving can easily lead to accidents. 2. Turn on the air conditioner with hot air: The car air conditioner, like a home air conditioner, has a hot air function. Adjust the air conditioner to warm air to dry the fog inside the car. This way, not only the front windshield but also the surrounding windows will become clear and bright. 3. Leave a gap in the window for air convection: If the fog is not heavy, you can open a small gap in the side windows (do not do this when it is raining). This allows air convection inside the car, gradually bringing the interior temperature closer to the outside temperature, and the fog will dissipate. This can achieve the effect of turning on the air conditioner without increasing fuel consumption.
15
5
Share

What does 17r mean?

R refers to the tire structure, indicating that this tire is of radial construction. 17 represents the rim diameter. 1. Radial tires. Passenger car wheels generally use radial tires. Radial tire specifications include width, aspect ratio, inner diameter, and speed limit symbols. 2. If the tire specification is 22555r17, it means the width between the two sidewalls of the tire is 225 millimeters, 55 represents the aspect ratio, "R" stands for the word RADIAL, indicating it is a radial tire. 17 is the inner diameter of the tire, measured in inches. 3. The numbers following the designation represent the tire load index. For common household car tires on the market, the numbers are generally above 80, corresponding to a maximum load capacity of over 450 kilograms per tire.
12
3
Share

Should a 1.4T engine use 92 or 95 octane gasoline?

The octane rating of gasoline for a 1.4T car should be based on the recommendations in the vehicle's official owner's manual. In addition to checking the appropriate gasoline grade in the owner's manual, it is also indicated on the fuel tank cap. You can also check the fuel tank cap. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Cars with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. If the compression ratio is higher, 98 octane gasoline should be used. However, with the use of some new technologies nowadays, the gasoline grade cannot be solely determined by the compression ratio. A high compression ratio can also be adjusted to use lower octane gasoline. This is because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane rating, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. For a 2007 Passat, occasionally using the wrong gasoline grade only requires switching back to the correct grade after use. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline by mistake will not cause damage, but the increase in octane number will change the fuel's ignition point, leading to delayed combustion in the engine. This means the engine's power output and thermal efficiency will decrease, and the actual feedback experience is reduced performance. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Because the octane number is too low, the gasoline's ignition point decreases and it may ignite prematurely during the compression stroke. If combustion occurs before the spark plug ignites during the compression stroke, resistance will arise during the upward stroke. This resistance will make the engine run very unstable. If it is mild knocking, it only increases noise and does not cause significant damage to the engine. However, if there is noticeable knocking, it indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.
15
4
Share

How long after vehicle scrapping can the original license plate be used?

After completing the transfer registration or cancellation registration of a motor vehicle, the original owner can apply to the vehicle management office to use the original license plate number when registering a newly purchased motor vehicle. To apply for the use of the original license plate, the original license plate must have been used for at least one year before it can be retained. The application to use the original license plate number must meet the following conditions: 1. The application must be submitted within six months after completing the transfer or cancellation registration; 2. The owner must have possessed the original motor vehicle for more than three years; 3. Any road traffic safety violations or accidents involving the original motor vehicle must have been resolved.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.