Has the Volkswagen Beetle been discontinued?

Original or Copy of Insurance Policy Required for Vehicle Inspection

During the annual inspection of a motor vehicle, the copy of the compulsory traffic insurance policy is required to be submitted. If the copy is lost, the original of the compulsory traffic insurance policy can also be submitted. According to Article 49 of the "Regulations on the Registration of Motor Vehicles," the owner of a motor vehicle may apply for an inspection compliance mark from the vehicle management office at the place of registration within three months before the expiration of the vehicle's inspection validity period. Before applying, the owner of the motor vehicle must resolve all road traffic safety violations and accidents related to the vehicle. When applying, the owner must fill out an application form and submit the vehicle's license, the compulsory traffic insurance certificate, the tax payment or tax exemption certificate for vehicle and vessel tax, and the motor vehicle safety technical inspection compliance certificate. The vehicle management office shall, within one day from the date of acceptance, confirm the motor vehicle, review the submitted certificates and documents, and issue the inspection compliance mark. Traffic management departments of public security organs and their traffic police officers shall, in accordance with the law, inspect the insurance mark of the compulsory traffic insurance when investigating and handling road traffic safety violations and road traffic accidents.

20

1

Share

What are the key points to pay attention to in Subject 2 of the driving test?

Subject 2 key points to note are as follows: 1. Clutch control: In Subject 2, you need to be steady, drive slowly and at a constant speed. The clutch must be controlled well. When turning the steering wheel one and a half turns, if there is any sign of the car stopping, immediately release the clutch slightly. When straightening the steering wheel, you must press the clutch a little, otherwise the test car will surge forward like crazy, especially in parallel parking where it requires skill, boldness, and carefulness. Clutch control should be gradual in both lifting and lowering. 2. Starting with the brake to prevent rolling back: The test site ground is uneven, making it easy to roll back when starting. Pay attention to starting with the brake - release the clutch to the critical point before releasing the brake. Starting with the brake can prevent rolling back. First, slowly lift the clutch until the car body slightly shakes, then release the brake. This follows the same principle as starting on a slope to prevent rolling back.

17

0

Share

What is the top speed of the Kawasaki Ninja 400?

The top speed of the Kawasaki Ninja 400 is 195 kilometers per hour. Here are the detailed specifications of the Kawasaki Ninja 400: Power: This motorcycle has a displacement of 250cc and is equipped with a four-cylinder engine, delivering a maximum horsepower of over 45 HP. It features a quick shifter system and a traction control system. Design: The new styling of the Kawasaki Ninja 400 resembles the Ninja H2, featuring a steel frame with the engine acting as a stressed member, along with LED headlights and taillights. The new Ninja 400 is an excellent sports bike for mountain roads and cornering, with its 400cc displacement and lighter weight making it more enjoyable for aggressive riding compared to older models. With certain modifications, it can also serve as your first track bike. There are many advantages to using a small-displacement bike for sport riding: the slower top speed makes it less dangerous than larger-displacement models, the lightweight enhances agility and fun, maintenance costs are lower, and repairs after a crash are more affordable if you push it too hard.

3

2

Share

Why does the Audi Q5 not have a reversing camera?

Audi Q5 reversing camera not displaying. First, you need to confirm whether the reversing camera function is activated. There are two methods to activate the reversing camera: the first is to shift the gear into reverse, and the other is to press the reversing radar activation button. If you are certain the gear is properly engaged or the reversing radar button has been pressed, but the reversing camera still doesn't display, it might be a system issue. Turning off the engine and waiting for a while before restarting may resolve the problem. If the first two methods are ineffective, it indicates that the reversing camera function is damaged. First, check if the radio, video playback, and other functions display normally. If they don't, the system host might be faulty. If other functions work normally except for the reversing camera, try pressing the host switch to restart the host or disconnect the battery. After disconnecting the power or restarting, if the reversing camera still doesn't display, the issue might lie with the system host, the reversing camera lens, or the related wiring. In this case, you need to visit a repair facility for inspection and maintenance.

6

4

Share

Why is the front wheel a bit shaky?

Here are the reasons why the front wheel may be shaky: 1. Reason one: Shaking may occur during high-speed driving due to misalignment of the front wheel positioning angle, low tire pressure, deformation from previous tire repairs, or uneven number of screw bolts. A bent or deformed drive shaft can also cause car shaking. 2. Reason two: If the car is frequently started cold without warming up, it may lead to shaking. This happens because fuel combustion is incomplete, resulting in insufficient power. During cold starts, if the temperature of the lubricating oil is low, more oil is required to meet the power demand. Consequently, the spark plug gap gradually increases, leading to reduced ignition energy and causing the car to shake. 3. Reason three: Uneven tire weight distribution can easily cause shaking. Therefore, car tires should be regularly inspected. If the tire weight distribution is uneven, lead blocks should be added to the rims to balance the weight of the two tires. Tire pressure should also be checked periodically, as a significant difference in pressure between the two sides can also cause shaking.

8

5

Share

What gear should an Audi use on the highway?

For automatic transmission models, using the D gear is sufficient. For manual transmission, change gears normally according to road conditions; generally, shifting to 6th gear is adequate. Audi was founded in 1899 by August Horch as A. Horch & Cie. Due to disagreements with his partners, Horch later established another company named August Horch Automobilwerke GmbH. However, he was sued for the similarity in company names, so he adopted the Latin translation of 'Horch' (meaning 'listen' in German) as the company name, hence 'Audi'. The four-ring logo of Audi originates from the four companies that merged in the early days (in Mainland China, Audi cars are thus jokingly called 'Tetracycline'). In 1932, four German automakers—Audi, DKW, Horch, and Wanderer—merged to form 'Auto Union.' They commissioned Ferdinand Porsche to design the Auto Union V16 racing car (also known as the Silver Arrow), which led their team to secure Germany's representation from the Mercedes team and subsequently dominate the European racing scene.

9

5

Share

Has the Volkswagen Beetle been discontinued?

Original or Copy of Insurance Policy Required for Vehicle Inspection

What are the key points to pay attention to in Subject 2 of the driving test?

What is the top speed of the Kawasaki Ninja 400?

Why does the Audi Q5 not have a reversing camera?

Why is the front wheel a bit shaky?

What gear should an Audi use on the highway?

What Does It Mean When the Throttle Light Comes On?

Why is there no air in the 1-3 gears of the car air conditioner but air in the 4th gear?

Can I Just Replace One Rear Shock Absorber If It's Broken?

Reasons Why a Motorcycle Won't Start, the Horn Doesn't Work, and the Headlight Doesn't Light Up?