Has the Toyota Crown Been Discontinued?

How to start and park an Audi Q2L?

Press the brake and then press the start button. After the vehicle comes to a complete stop, press the button again. When starting the engine, the operation of other electrical devices will temporarily stop. You do not need to press the brake pedal; simply press the one-touch start button. To turn off the ignition, press the button again. The needle in the tachometer will move to the OFF position. To park: stop the car, press the brake, shift to N (Neutral), release the brake, engage the handbrake, turn off the engine, and then shift to P (Park). Always engage the handbrake before shifting to P.

8

2

Share

How to Remove the Headlights of a Skoda Rapid?

Skoda Rapid headlight removal method: First, disconnect the bulb's power plug. After disconnecting the power interface, remove the waterproof cover behind the bulb, then take out the bulb from the reflector housing. In terms of body dimensions, the Skoda Rapid measures 4501 mm in length, 1706 mm in width, and 1469 mm in height, with a wheelbase of 2603 mm. Exterior-wise, the Skoda Rapid features a brand-new Skoda family-style front design, including a vertical chrome grille, a long chrome trim strip on the lower air intake, and a simplified new logo, all of which align well with its youthful positioning. The headlights' moderate design reflects Skoda's consistent and steady style.

14

4

Share

Which line should be aligned for reverse parking?

Between the second and third lines. Here are detailed explanations about the three lines in reverse parking: 1. Green line: In the reversing camera display, if objects haven't entered the green zone, it indicates there's still ample space for reversing, allowing confident reversing. 2. Yellow line: When objects enter the yellow zone during reversing, it means you should slow down as the distance between the vehicle and objects is about one meter. 3. Red line: The red line is closest to the rear of the vehicle. When objects enter the red zone, you must stop immediately as the distance between objects and the rear bumper is only 30cm at this point.

5

2

Share

What does 'ETC without tag' mean?

ETC without tag means the ETC electronic tag is invalid. Since ETC is designed for dedicated vehicle use, it has a protective interlock installed during setup - specifically the button at the back. If this button is triggered twice consecutively, it will cause the ETC electronic tag to become invalid. ETC stands for Electronic Toll Collection system, where ETC-exclusive lanes are designated for vehicles equipped with ETC onboard units, utilizing electronic payment methods. The ETC system works through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna at the toll station's ETC lane. This system employs computer networking technology to process backend settlements with banks, achieving the purpose of allowing vehicles to pass through toll stations without stopping while paying toll fees.

15

2

Share

How to Clean the Gaps in Car Windows?

Methods for cleaning the gaps in car windows: 1. Find a thin metal sheet of suitable size and wrap it with a dry cloth; 2. Insert the cloth-wrapped metal sheet into the gap of the car window and gently push it from front to back. When the cloth gets dirty, switch to a clean side to wrap the metal sheet and repeat the process until no visible dust remains on the cloth. Precautions: Do not use excessive force during cleaning to avoid damaging the sealing rubber strip. The dust in the gaps of car windows is an area that cannot be cleaned during regular car washing. If the gaps are filled with dust, the dust will stick to the windows when raising or lowering them, leaving unsightly marks. Therefore, car owners should clean these gaps frequently.

11

5

Share

How to Route the Wiring for Installing a Rearview Camera?

Methods for routing the wiring when installing a rearview camera: 1. Route the power cable of the recorder to the car charger, and lead the camera cable from the rear seat to the back of the vehicle; 2. Use a screwdriver to remove the plastic panel of the car's trunk; 3. Choose a suitable position to fix the rear camera, and connect the camera's cable to the positive terminal of the taillight. During the connection process, try to use concealed wiring as much as possible and avoid exposed wiring to prevent inconvenience during vehicle use. The rearview camera, also known as a parking assist system, or a reversing visual system, or an onboard monitoring system, is widely used in various large, medium, and small vehicles for reversing or driving safety assistance.

13

0

Share

Has the Toyota Crown Been Discontinued?

How to start and park an Audi Q2L?

How to Remove the Headlights of a Skoda Rapid?

Which line should be aligned for reverse parking?

What does 'ETC without tag' mean?

How to Clean the Gaps in Car Windows?

How to Route the Wiring for Installing a Rearview Camera?

How to Handle the Physical Condition Certificate for Driver's License Renewal?

How to use the air conditioning in Audi Q2?

How to Set the Lock Sound for Cruze?

How to Adjust Time and Date on Audi Q5?